Hi!! I would like to know if you can recommend a chip or something similar to polish (final) polyester resin parts? Note: parts that vary between 20mm and 45mm thankful
Dear Mohammad, We are working with all kind of metalls in our mass finishing machines. Excelent shining can be reached with the combination of disc finishing and electropolishing machines. Resine has to be tested because we have the danger of brackage. Please send us your contact details (jota@otec.de) and we will stay in contact to find the best solution for your needs. Best Regards Soran Jota
Hola, tenemos muchos clientes que venden las piezas directamente sin trabajar de mano despues. Pero unos tambien quieren un pulido manual despued. Pero seguro el trabajo despues es muy rapido y solo un toque. Si quiere por favor mandanos unos de su muestras de hacer una prueba en nuestro empresa en Alemania. Nuestro direccion es Heinrich-Hertz-Str. 24 en 75334 Straubenhardt en Alemania. Con saludos de Alemania.
Hello, i have the same Machine and the same of these Media for Mass Finishing of Imitation Jewellery but missing the name of these media creates problem to buy it from the market. So, please provide me the full details of these media.
Dear Mr. Kumar, please send us your adress details and your needs to info@otec.de. We will workout the best solution for your mass finishing needs. Best Regards Soran Jota
Der Mr. Awan, Thank you very much for your interest. Please send your contact information to info@otec.de. A colleague will contact you. Best regards Your OTEC-Team
*impressed with quality. my unit came 🔎🔍 **allabout.wiki/Lyman** with a pound or so of what looks like stainless steel shot and more importantly a spare o-ring for the access hatch and a toothed-belt for the motor-drum drive. Nice touch.the drum and base are both larger than I expected and heavy.the materials and build quality seem good to very good.it's been running on the slowest speed for the last couple of hours with2 pounds or so of my steel parts to be deburred,4 pounds or so of 1" ceramic stars andwater with a little bit of dawn soapfilled to 1/2 the drum volume.I weighed the drum half filled with the previous mentioned items and it came out a little under 9 **pounds.like**: I like the way the drum hatch gets locked.the robustness of the build and motor.con: no instructions that I can see on how to work the base dials/controls, but I got it running by just turning the knobs.grin.not sure if the timer is on or what the 1/0 switch does (it's not on/off to the motor), timer use maybe ??I'll have another look in the box for the instructions or maybe on line .... this is not a big enough of an issue to take rating stars off my initial 5 star rating.update 10.1.2017: ran it 24hrs/day for 4 days straight with 4 different batches of parts and it worked without issues. My a36 steel parts came out as expected with a nice even finish.BTW not mentioned but as I state in the previous line, I've been running it without a 'timer' limit. I suspect the '1/0' switch when switched to '0' disables the timer ... however I got it to work this way, it's the way I wanted, so I can run it overnight without a 3hr reset of the timer.*
Hello Rolf, the screening station to separate the media and jewelry will be visible from minutes 1.15 on the video. If this is what you asked if. You can contact me under Jota@otec.de to answer all open questions. Also we would be happy to show you the results from the machine with your work pieces. Just send us your samples to straubenhardt for a free test.
Hi ~~Are you polishing it with aluminum oxide powder?
Do they put a paste in with the coarse and fine walnut?
most likely its "empregnated" walnut
Hi!!
I would like to know if you can recommend a chip or something similar to polish (final) polyester resin parts?
Note: parts that vary between 20mm and 45mm
thankful
Can i polish Stainless steel, iron, copper, and resin by this way
Dear Mohammad, We are working with all kind of metalls in our mass finishing machines. Excelent shining can be reached with the combination of disc finishing and electropolishing machines. Resine has to be tested because we have the danger of brackage. Please send us your contact details (jota@otec.de) and we will stay in contact to find the best solution for your needs. Best Regards Soran Jota
hello , i have a cf 18 x 2 , and it works fine , i see that with fine walnut h500 you don´t use plastic media LFP3 , you do´nt recommend it ?
sorry what is the walnut h500 and plastic media LFP3 you referring to?
Hello, thank you for your message! Our sales team will be happy to answer your questions. Please write an e-mail to info(at)otec.de
I can't send that email address. Why?
@@shwinshwin7235 -it's info@otec.de
Hola,
Alfinal se consigue un pulido espejo? O después pasaría a un pulido manual?
Hola, tenemos muchos clientes que venden las piezas directamente sin trabajar de mano despues. Pero unos tambien quieren un pulido manual despued. Pero seguro el trabajo despues es muy rapido y solo un toque. Si quiere por favor mandanos unos de su muestras de hacer una prueba en nuestro empresa en Alemania. Nuestro direccion es Heinrich-Hertz-Str. 24 en 75334 Straubenhardt en Alemania. Con saludos de Alemania.
Hello, i have the same Machine and the same of these Media for Mass Finishing of Imitation Jewellery but missing the name of these media creates problem to buy it from the market. So, please provide me the full details of these media.
Hello, thank you for your comment! Our sales team will be happy to advise you. Please write an e-mail to info(at)otec.de
Please mail to sales@fintechsolutions.co.in
Sir contact me
Prize pls
congratulations achievements.
What is the price of the kit?
3
I want to buy this machine i am from pakistan
I want to purchase
Dear Mr. Kumar, please send us your adress details and your needs to info@otec.de. We will workout the best solution for your mass finishing needs. Best Regards Soran Jota
Mo.8307755385
Agra
@@KuldeepKumar-wx5fk thank you Mr. Kumar, our sales team from India will contact you. Best regards Soran Jota
Sir i want to purchase
Der Mr. Awan,
Thank you very much for your interest.
Please send your contact information to info@otec.de.
A colleague will contact you.
Best regards
Your OTEC-Team
@@otecprazisionsfinishgmbh2504
00966509807580
sir prize?
Hello, thank you for your comment! Our sales team will be happy to advise you. Please write an e-mail to info(at)otec.de
wow
Xạo
*impressed with quality. my unit came 🔎🔍 **allabout.wiki/Lyman** with a pound or so of what looks like stainless steel shot and more importantly a spare o-ring for the access hatch and a toothed-belt for the motor-drum drive. Nice touch.the drum and base are both larger than I expected and heavy.the materials and build quality seem good to very good.it's been running on the slowest speed for the last couple of hours with2 pounds or so of my steel parts to be deburred,4 pounds or so of 1" ceramic stars andwater with a little bit of dawn soapfilled to 1/2 the drum volume.I weighed the drum half filled with the previous mentioned items and it came out a little under 9 **pounds.like**: I like the way the drum hatch gets locked.the robustness of the build and motor.con: no instructions that I can see on how to work the base dials/controls, but I got it running by just turning the knobs.grin.not sure if the timer is on or what the 1/0 switch does (it's not on/off to the motor), timer use maybe ??I'll have another look in the box for the instructions or maybe on line .... this is not a big enough of an issue to take rating stars off my initial 5 star rating.update 10.1.2017: ran it 24hrs/day for 4 days straight with 4 different batches of parts and it worked without issues. My a36 steel parts came out as expected with a nice even finish.BTW not mentioned but as I state in the previous line, I've been running it without a 'timer' limit. I suspect the '1/0' switch when switched to '0' disables the timer ... however I got it to work this way, it's the way I wanted, so I can run it overnight without a 3hr reset of the timer.*
Hello Rolf, the screening station to separate the media and jewelry will be visible from minutes 1.15 on the video. If this is what you asked if. You can contact me under Jota@otec.de to answer all open questions. Also we would be happy to show you the results from the machine with your work pieces. Just send us your samples to straubenhardt for a free test.