if you hear static in your mic this is the solution. the headset is well designed but in the manufacturing processes they use larger cables for the audio that make friction with the mechanical movement of the mic that causes the ground (copper color) cable to break. Audio cables have an insulation layer, to get rid of the insulation layer burn the audio cable and be ready to blow the fire. then, with a knife or a cutter scratch gently to get rid of the insulation and then you will have no problems with the soldering iron. Be careful with the fumes specially the ones from the burned insulation layer. U dont have to replace all the cables. Your video helped me a lot thx!!!
Finally somebody did what I'm planning on doing! I already have an RMA replacement but I'm going to try and fix the dead one to have two working headsets!
Not sure what part it is that you broke. There is a component with two triangle pins on the board facing the microphone, if they are both pressed in the microphone will unmute. Find something to tie around the board to keep these presed in, metal wire or similar.
My mic works. The problem is when i change its position and it automaticaly mutes itself. When pulling down it doesnt unmute propperly. Any suggestions?
if you hear static in your mic this is the solution. the headset is well designed but in the manufacturing processes they use larger cables for the audio that make friction with the mechanical movement of the mic that causes the ground (copper color) cable to break.
Audio cables have an insulation layer, to get rid of the insulation layer burn the audio cable and be ready to blow the fire. then, with a knife or a cutter scratch gently to get rid of the insulation and then you will have no problems with the soldering iron. Be careful with the fumes specially the ones from the burned insulation layer.
U dont have to replace all the cables.
Your video helped me a lot thx!!!
You good :)
Where can I get that cabling/wire used? I can't find any that small/flexible.
from any earphone
This helped massively yo. Appreciate it 🤙
Finally somebody did what I'm planning on doing! I already have an RMA replacement but I'm going to try and fix the dead one to have two working headsets!
is that possible to make curt on the mic becouse i broke that trigger that turn on and off.. I mean, is there any way to make the mic always on ?
Not sure what part it is that you broke. There is a component with two triangle pins on the board facing the microphone, if they are both pressed in the microphone will unmute. Find something to tie around the board to keep these presed in, metal wire or similar.
you need to solder the 2 sides of button
Looks like the cable that comes from de Mic has 3 cores, and one of them is divided in two, is that right?
My g633 not working pc to 3.5 mm shirter problem 😢
Let me know if you have a solution
The wire migh be broken
you can ship it to us
we will fix it
contact us on facebook.com/mrfixeg
My g633(wired) right speaker not working. Why font working? Please answer ne?
We should check it 😢
عندي g533 المايك فصل لوحده فجئة من غير ما يقع او اي حاجة , غيرت الويندوز والتعريفات وكل حاجة مش شغال , كدا لازم تتفحص ؟
سلك المايك اتقطع و محتاج يتغير
كلمنا علي الفيسبوك
facebook.com/mrfixeg
where can I find a replacement wire? what is the gauge that I need?
Use wire from any other earphone
@@mrfixeg 🤯 genius
انا عندي نفس السماعة تقريباً logitech g 635 والمايك بتاعها باظ بس مش عارف هو هاردوير سليم ولا لا الصراحة
هنحتاج السماعه يا فندم نكشف عليها
My mic works. The problem is when i change its position and it automaticaly mutes itself. When pulling down it doesnt unmute propperly.
Any suggestions?
عندكم فرع في الرياض؟
احنا في مصر فقط
ولكن ممكن تشحن لنا السماعة
I have the same headset and the microphone is faulty. I couldn't fix it because I couldn't find the 4 wire mic and Led cable.
You can take the wire from any earphone
or kindly ship to us we will fix it for you
facebook.com/mrfix
thanks for the tutorial mate
You’re welcome
THIS IS FIRE MUSIC DAWG
:D
انا عندي نفس السماعة بس المايك حقها مقلوب يعني لما انزل المايك يكتم الصوت ولما ارفع المايك ينفتح الصوت المفروض يكون العكس
هنحتاج السماعه يا فندم نكشف عليها
موجود للحين التصليح
موجود
لو فيه ليك مكان صيانة ياريت تقولي عليه علشان اجيلك بإذن الله
ياريت حضرتك تكلمنا علي الفيسبوك
facebook.com/mrfixeg
او تتصل بينا علي 01090098338
انا عندي نفس السماعه وانا من الامارات والمايك خربان
متوفر عندنا شحن تبع شركه Aramex
عظمة والله
شكراً لحضرتك