main power from battery itself all esc have to run to battery. but all plugs going to t.x unit you only need one unit to have the red wire in . just a note. not sure if he mentioned this . great show . love the builds. and to see what's coming up next.
fid you mention zo tell people if using multiple E.S.C units. pull all the red wires out except for one e.s.c unit leave it with power. you dont need power running to all e.s.c units as will burn out from each one saying qe have power lets go. . onky leave one esc with red wire in plug of t.x unit. omly need one from an too t.x. rest not needed
Excellent tutorial Lasse. I would like to set mine up so that either track is stationary when turning, depending on which direction is chosen of course. Are you able to cover that in the setup of the mixing in the transmitter please?
no problem at all, all you need to do is pull forward on the stick while turning, and one of the motors will be stationary. for example, i pull the stick a little forward and to the left, the left trackmotor will remain stationary and the right trackmotor will spin forward, and vice versa. Same when pulling the stick backward while turning. ;)
Enjoyed the mixing explanation.
yes!! keep up the good work, and get the metal chains track option ready please.
thank you 🥰🥰 yes, the parts for steel chains will be made :)
Amizing explane for the contoller
Congatulations, Now its a propper tutorial.
Im a big fan of using "solder sleeves" when connecting a numbervof wires together. Much better and quicker than soldering too.
yes, I would like to try those sometime :)
Jag bara ÄLSKAR dina videor Lasse... Super...
main power from battery itself all esc have to run to battery. but all plugs going to t.x unit you only need one unit to have the red wire in . just a note. not sure if he mentioned this . great show . love the builds. and to see what's coming up next.
Very good job! Printing my parts now and ordering the electronics. Just wondering what type of diodes you used on the limit switch?
Ein sehr schönes Modell Lasse, sehr gut gelungen.
Aweaome work as usual Lasse!
Thank you so much 😃
Awesome mate, very handy, Merry Christmas!
thank you 🥰🥰 merry christmas to you too my friend :)
great job . Merry Chritmas
thank you 🥰🥰 merry christmas to you too my friend :)
On the dozer you said 3 30amp esc and 2 60amp esc do you still solder them all together the same way?
Verry nice Job 👍🏽
Perfekt 😍
thank you 🥰🥰
what a masterpiece. thank you for your time and effort! - Will this loader have the option for flat metal chain drive?
thank you 🥰🥰 yes, I will make parts for the steel chain in the files as well ;)
@@burnie222rclasseanhanger6 Brilliant :D Can we get a test trial video of the cat973 when you have time? would love to see some scooping action ;)
Hey Lasse my buck doesn't dump all the way?? I have 30mm stroke actuators and I followed the instructions, I cant figure it out?
Hello, I'm very interested in buying all your files. But I wanted to know are the parts difficult to get in 🇨🇦 canada?
A masterpiece and a must to build later on when i have the possibilities to do it. Any news on the H16? Keep up the good work Lasse.
thank you :D yes, the Akerman is coming along nicely. and I will begin working on the build manual for it after the 973K :)
fid you mention zo tell people if using multiple E.S.C units. pull all the red wires out except for one e.s.c unit leave it with power. you dont need power running to all e.s.c units as will burn out from each one saying qe have power lets go. . onky leave one esc with red wire in plug of t.x unit. omly need one from an too t.x. rest not needed
Excellent tutorial Lasse.
I would like to set mine up so that either track is stationary when turning, depending on which direction is chosen of course.
Are you able to cover that in the setup of the mixing in the transmitter please?
no problem at all, all you need to do is pull forward on the stick while turning, and one of the motors will be stationary. for example, i pull the stick a little forward and to the left, the left trackmotor will remain stationary and the right trackmotor will spin forward, and vice versa.
Same when pulling the stick backward while turning. ;)
@@burnie222rclasseanhanger6
I didn't see that happening in the video. I saw one track going fwd and one going backwards. Maybe I'm missing something?
This looks great! When are you releasing the files?
very soon ;)
@@burnie222rclasseanhanger6 Awesome! Building the Kitten 394 right now, but need to secure the next build ;)
it looks that you have used 30 mm actuators?
yes, 64N , 30mm, 12v :)
excellent vidéo merci,
Its usefull also to the excavator cool