Why can't I comment on the main video but if I reply to a comment here it is ok? I hope I did not say anything to upset you?? Really enjoy all the videos
What a morning.... I open up TH-cam and have a notification from @Maker B posting a new video!!! Thanks for entertaining us all year long and keep up the great work. P.S. - Please post more often...I love your videos!!
Could you make a comparison video between this and the manual? Like hardest part of making each, total time building each, and like writing/performance side by side and which you prefer more? Very impressive craftsmanship btw ❤
Neat. I still have a cheapo plastic one like that from when I was a kid which has red, green, blue and black. Only change I'd make is to use brass. I like steel, but I love brass.
You could use erasable ink cartridges and then make the reverse setting be the eraser. Maybe ink like from Frixion pens; it erases based off heat, so the eraser is just a hard piece of rubber that doesn't wear like a normal eraser/creates friction
Excellent craftsmanship and clever mechanism design. I really like your small lathe and CNC mill. Personally, I hate those rollerball pens though. But that's personal preference. I also wish there was a way to cover the visible PLA through the slider window - IMO 3DP PLA takes away from your wonderful craftsmanship. But overall it's beautiful and very impressive.
13:55 YOU KNOW... This... I feel like this concept could be converted into an engine somehow. Like... if the tips of the pens were removed and the blue parts are the pistons, the design of the rotational mechanism could be where we get direct parallel rotational force from said pistons rather than using a cam shaft to get perpendicular transference.. Are there any youtubers out there that specialize in making engines the way Integza does with rocket engines? I feel like we should send them this video.
Interesting thing to make! Possible with a lathe ,, maybe the disc will be interesting to see. Think it can be cut on a lathe and then with sanding make it thin enough?
Amigo, realmente no se que pensar, digo las herramientas son geniales, pero ¿Un bolígrafo de 3 colores? Eso me recuerda la caricatura donde utilizan un árbol completo para hacer un mondadientes, es decir hay tantas cosas mas geniales que seguro se pueden hacer con todos esos recursos que un bolígrafo que debe pesar bastante y tiene un tamaño poco practico con el agregado que utiliza minas de tinta del tipo que utilizan bolígrafos chinos de plástico con la misma función no me parece la mejor forma de mostrar lo que pueden hacer las herramientas que son geniales, de todas formas gracias por el vídeo yo no lo puedo hacer mejor.
I really wish the "how it works" section was at the beginning instead of the end. As it is now, the whole video is just watching a guy silently machining random stuff. Idk, maybe that's what everybody else is here for?
Thank you for all the support this last year! Hope you’re all enjoying the holidays and have a Happy New Year!!!
Thank you! You've been an inspiration in my own maker journey!
Why can't I comment on the main video but if I reply to a comment here it is ok? I hope I did not say anything to upset you?? Really enjoy all the videos
I wish you a happy new year too!❤
Wishing you the same🎉
What a morning.... I open up TH-cam and have a notification from @Maker B posting a new video!!!
Thanks for entertaining us all year long and keep up the great work.
P.S. - Please post more often...I love your videos!!
I’m glad you like it! Thanks for watching!
I want this and the manual one ❤
I'm not certain, but I think the manual is a fountain pen of sorts.
@ it’s like those pens that have multiple colours and reverse is a rubber/eraser
top graphics, I want 1 as well. hope to see more work in the new year.
Appreciate it! More to come in the new year.
Could you make a comparison video between this and the manual? Like hardest part of making each, total time building each, and like writing/performance side by side and which you prefer more? Very impressive craftsmanship btw ❤
R for red, N for....Navy blue, and D for...uh.. dark😅
Jokes aside, excellent work sir.
Thanks for the videos. Always interesting and entertaining.
👍👍👍
hell yeah dude you gotta do a sequential gearbox next
Awesome video as always! I always look forward to your uploads! Can’t wait to see what creations you have in store for 2025! Happy New Year!
Happy New Year!!!😀
14:49 thank you for sharing this beautiful 15 minutes of excellent work 👌
Great job and a very precise construction. Congrats and greetings ! 👍 😊
Thank you so much 😀
Amazing Craftsmanship 👍🏻👍🏽👍🇬🇧🇬🇧
Спасибо за творчество, ты очень талантлив. Успеха тебе
Wow nice Video! I'm looking forward to next half -year. Then I start in my training with metal turning
👍👍👍
11:10 Nice work, but those ink tubes need to breath and you blocked their air hole, won't be writing much with such a pen.
Какой же кайф смотреть на работу мастера! Спасибо за ролик и за труд! 👍
Neat. I still have a cheapo plastic one like that from when I was a kid which has red, green, blue and black. Only change I'd make is to use brass. I like steel, but I love brass.
Beautiful pen beautifully done
You could use erasable ink cartridges and then make the reverse setting be the eraser. Maybe ink like from Frixion pens; it erases based off heat, so the eraser is just a hard piece of rubber that doesn't wear like a normal eraser/creates friction
文具好きとしては単純に重そうって思うけど、文具好きの前に男なんでこの浪漫が最高。ＭＴも良かったけどＡＴはよりスッキリしましたね。サムネ見た時はトルコンでも組み込むんかと思いました。
this is what perfection looks like
These videos are so relaxing
Technically that's a linear short shift. Automatic would be if you put it in auto mode and then it came out whenever it was near the paper.
WOW 😲 amazing engineering
Brilliant work😮
Nice work, very neat pen!
Excellent work
Excellent craftsmanship and clever mechanism design. I really like your small lathe and CNC mill.
Personally, I hate those rollerball pens though. But that's personal preference. I also wish there was a way to cover the visible PLA through the slider window - IMO 3DP PLA takes away from your wonderful craftsmanship. But overall it's beautiful and very impressive.
Great craftsmanship, is the CAD model available to download
You have good ideas. 👍
Happy New Year 2025... and may you never run out of ideas.
Love it ❤❤❤ would pay $$$
Another terrific video thanks! Although pen guys like myself would call that a bit of a baseball bat 😂
Nunca va a dejar de incomodarme la cantidad de material que se gasta al hacer estas cosas.
13:55 YOU KNOW... This... I feel like this concept could be converted into an engine somehow.
Like... if the tips of the pens were removed and the blue parts are the pistons, the design of the rotational mechanism could be where we get direct parallel rotational force from said pistons rather than using a cam shaft to get perpendicular transference..
Are there any youtubers out there that specialize in making engines the way Integza does with rocket engines? I feel like we should send them this video.
Very cool!
When are u gonna sell these artworks?? They are amazing!
I need one lmao..
Love ur work :-)
How to make a air matelic air horn
Interesting thing to make! Possible with a lathe ,, maybe the disc will be interesting to see. Think it can be cut on a lathe and then with sanding make it thin enough?
Please make the diesel one
Un trabajo perfecto.
Amigo, realmente no se que pensar, digo las herramientas son geniales, pero ¿Un bolígrafo de 3 colores? Eso me recuerda la caricatura donde utilizan un árbol completo para hacer un mondadientes, es decir hay tantas cosas mas geniales que seguro se pueden hacer con todos esos recursos que un bolígrafo que debe pesar bastante y tiene un tamaño poco practico con el agregado que utiliza minas de tinta del tipo que utilizan bolígrafos chinos de plástico con la misma función no me parece la mejor forma de mostrar lo que pueden hacer las herramientas que son geniales, de todas formas gracias por el vídeo yo no lo puedo hacer mejor.
How about making some sort of custom mechanical pencil? 😉
I like that idea👍 Will add it to the queue.
@MakerB Sweet. Best of luck!! Hope you have a great new year.
You should sell them. 10/10 would buy
Next will be DSG or CVT?
In my opinion this looks a bit chunky, but nevertheless it's an impressive piece!
Would it be easier to buy a pen from amazon?! 😀 Another great video 👍👌
Paddle shifters when?
that is cool
The forms link in description isn’t working fyi
Fixed it now. Thank you for letting me know.
next, tritium vials with corresponding colors to the ink
step格式的文件图纸可以分享吗
0:03 Man saying: Mmmmmmmm
Thank you. Nice project my friend
Интересная вещица
yay
Yeah but it slipped in the vice so it’s scrap now
GoodJob. Thanks. 🙏🏻👍🏻👌🏼✌🏼🙏🏻
Noooo how could you,
THEY CAN FINALLY WRITE!😭😭😭
we spend our times
making pens....
💯👍😊💯
I really wish the "how it works" section was at the beginning instead of the end. As it is now, the whole video is just watching a guy silently machining random stuff. Idk, maybe that's what everybody else is here for?
Im with you on this
100% agree
That is what I’m here for tbh, yeah!
I'm definitely here for that.
Сделал совершенно не нужную вещь.🤔
Very nice!