Before I insert plugs into plaster board (drywall), I always apply plenty of strong *construction glue* on them first and in the hole as well. Once everything is mounted and the adhesive cures, the whole assembly becomes much stronger. When you try to pull the plug out later, it feels like a part of the wall itself.
That's dangerous, you should not be telling people this, I got a call out today where a radiator had fell onto a child, it was fitted just like that, it needs to be secured to the timber. The little silly butterfly wing fixings are only for small light items, pull the radiator towards you and see what happens!!!
Great video. However I would still be nervous about hanging anything weighty and/or important from a plasterboard wall. It's just too easy to crack plaster and once it is compromised there is no strength - you could see that starting once the fittings were tightened.
One has to wonder what all that expansion and contraction will do over the years; under their covers, my radiators are just copper/aluminum fin tubes and the mountings have pulled away in a few places. If you could get the brackets on one side over a stud, the other side would have little work to do. Or maybe these radiators should just be shipped with an oak rail, the width of the radiator, which could be drilled over the studs and would hold the load of the brackets at the ends.
You need about 2-3 inch cavity with toggles , you don't always have that cavity space at the rear and you cant see most of the time what your cavity is! Wit the other fixings you still need a good 25-30mm. All plumbers that are experienced have moved onto Bullfix Plasterboard Fixings( The Bullfix Universal Plasterboard Fixings can squeeze into a cavity of only 7mm) The Bullfix Extra Plasterboard fixing(stronger and larger fingers) can squeeze into a gap of 19mm! One bullfix Universal can hold a mans weight! th-cam.com/video/6YqqtYO_uoQ/w-d-xo.html
Excellent video James, it really helped me. Thank you!
Before I insert plugs into plaster board (drywall), I always apply plenty of strong *construction glue* on them first and in the hole as well.
Once everything is mounted and the adhesive cures, the whole assembly becomes much stronger. When you try to pull the plug out later, it feels like a part of the wall itself.
Where can I buy the second fixture from? The one you said is the stronger one?
VIDEO - How to hang a radiator on plasterboard. Explained from start to finish by the very capable Jimmy the plumber
NOW I KNOW
You sir just saved me a whole load of work, top man 👍
That's dangerous, you should not be telling people this, I got a call out today where a radiator had fell onto a child, it was fitted just like that, it needs to be secured to the timber. The little silly butterfly wing fixings are only for small light items, pull the radiator towards you and see what happens!!!
Very useful video, thanks.
What's the name and make of all the wall plugs you used.... you never said...
What are those screw fixings called ?
Whats the name of the fixings you recommend that split and make the T piece
Cheers dude :)
Great video. However I would still be nervous about hanging anything weighty and/or important from a plasterboard wall. It's just too easy to crack plaster and once it is compromised there is no strength - you could see that starting once the fittings were tightened.
One has to wonder what all that expansion and contraction will do over the years; under their covers, my radiators are just copper/aluminum fin tubes and the mountings have pulled away in a few places. If you could get the brackets on one side over a stud, the other side would have little work to do. Or maybe these radiators should just be shipped with an oak rail, the width of the radiator, which could be drilled over the studs and would hold the load of the brackets at the ends.
تمام الله ينور عليك ربنا يزيدك من العلم شرحك مبسط وجميل
VIDEO! How to hang a radiator on plasterboard! Worth watching to see Jimmy make his point by radiator surfing! buff.ly/1PtoQVg #diy
Where can I get the radiator clamps and brackets that are beining used?
what are the correct fixings for a tiled hollow wall?
hollow wall anchors are the boy
Never hang a radiator on a hollow wall ! if someone pulls the radiator towards them it will cause them injury, so dangerous.
NEW VID! How to hang a radiator on plasterboard! Jimmy the plumber shows us it's nothing to be scared of, literally! buff.ly/1ETQyn3
What's the name of the plugs you used that snapped into a T?
Driva Plus www.amazon.co.uk/Plasterboard-Fixings-branded-Drilling-Clamping/dp/B00YUV9PH4
Top video!
How to hang a radiator on plasterboard...and then surf on it. With Jimmy the plumber.
am I mistaking or did u say 570 was the bottom of the top bracket , top brackets were fixed below 570 line , open to correction , sorry
For sure that's just ended up over the skirting board
Give it a month or so the radiator will rip out of the plasterboard.
He really needed to “Hold tight” at the end
I thought the first plugs wasnt for plasterboard
I don’t think this will work with my cast iron rads
How to hang a radiator on plasterboard, with Jimmy the Plumber
What are the metal fixings at 6:07 called? Who makes them?
Thanks
Search: "EZ Toggle Cam" or "E-Z Ancor Toggle Lock"
You need about 2-3 inch cavity with toggles , you don't always have that cavity space at the rear and you cant see most of the time what your cavity is! Wit the other fixings you still need a good 25-30mm. All plumbers that are experienced have moved onto Bullfix Plasterboard Fixings( The Bullfix Universal Plasterboard Fixings can squeeze into a cavity of only 7mm) The Bullfix Extra Plasterboard fixing(stronger and larger fingers) can squeeze into a gap of 19mm! One bullfix Universal can hold a mans weight!
th-cam.com/video/6YqqtYO_uoQ/w-d-xo.html
Impact driver on plasterboard fml.
Why the subtitles?
Bill Dee My Bad... :)
👍😂🤩🤩🤩🤩