Amazon is just the shipper/warehouse. It's convenient. You can get kurtitech hose from kuritec, Hudson valves from their site, or banjo valves from banjo, or just buy them all in one place on Amazon. They aren't Amazon products
@@YoungAmbitionYA I understand how it works, just that a lot of stuff on Amazon such as the jrod, quick connects, etc is some brand name I have never heard of. I was curious if you actually buy the off brand or posted Amazon for convenience? Please don't take offense, I guess I am asking if the off-brand equipment/supplies is worth while.
How quickly does SH go bad, I’m able to get it barged to me by boat and they fit 4 drums to a pallet. Just curious is it Going to last through the winter for the next season?
Man you must get jacked up with no lance. Been in the business for 15 years and could never complete a job hunched over like that. But came out nice….do you brother
What hose reel are you using on your 3/4 soft wash hose? Just purchased the 10gm 24v with 200ft of hose need to upgrade from my 1/2 reel but haven’t had any luck finding a 3/4 reel
I'm using half. It's only a 6" manifold so doesn't seem to pinch the flow at all enough to notice. I found some 1" manifolds but they weren't stainless
Awesome thanks for the info I’m not getting the height that the 24V is supposed to be getting almost same at my 5.5 was. My manifold has rust deposits in it restricting flow may try the 1 inch manifold and see if that works better
Heck, just bent the one ya got. 2 hard points on the trailer (or wherever) and giv’er a lil bend… crazy man, crazy! 🤪 … just be sure your handle is in the right position. FYI, Mike H inderlighter (power wash. ) has a video about wand balance. Hope this info is ok to post on your channel Eric, if not delete and I’ll know. 😊
For those concerned - I do have a Lance and a surface cleaner. Footage was better close up 😎🤙
Bro you doing those steps at the beginning of this video without an extension wand hurt my back just watching you do it. Looked good close-up though.
Appreciate that. Felt it myself 🤣
What chemicals do you use to clean a composite deck?
4-6% bleach then light pressure wash
@@YoungAmbitionYA thank you sir!
I am curious, You have a lot of equipment from Amazon. Do you really buy that, or is that representative of stuff you buy from other sources?
Amazon is just the shipper/warehouse. It's convenient. You can get kurtitech hose from kuritec, Hudson valves from their site, or banjo valves from banjo, or just buy them all in one place on Amazon. They aren't Amazon products
@@YoungAmbitionYA I understand how it works, just that a lot of stuff on Amazon such as the jrod, quick connects, etc is some brand name I have never heard of. I was curious if you actually buy the off brand or posted Amazon for convenience? Please don't take offense, I guess I am asking if the off-brand equipment/supplies is worth while.
How quickly does SH go bad, I’m able to get it barged to me by boat and they fit 4 drums to a pallet. Just curious is it Going to last through the winter for the next season?
It will last
Which model “flojet fat boy “ version of the 12v pump the bypass version or the automatic demand would be better for Soft washing
Demand
Why do you disconnect and plug into that manifold instead of keeping all of your hose connected?
No need to pull off 300ft if I only need 50
@@YoungAmbitionYA do you have a video on that manifold connection for using shorter hose lengths??? I've NEVER seen that b4
Good work champ
🙏🤙
Auuugh, You young fellas with your strong backs… I hate y’all! J/k
🤣🤣🤣🤣
Nice work! 👍
🤣 gotta use it while I got it
Great job my man. 🌟🌟🌟🌟🌟👌👍
😎🙏🤙
Man you must get jacked up with no lance. Been in the business for 15 years and could never complete a job hunched over like that. But came out nice….do you brother
I have a lance. I just didn't use it for the video so i was closer up
What hose reel are you using on your 3/4 soft wash hose? Just purchased the 10gm 24v with 200ft of hose need to upgrade from my 1/2 reel but haven’t had any luck finding a 3/4 reel
I'm using half. It's only a 6" manifold so doesn't seem to pinch the flow at all enough to notice. I found some 1" manifolds but they weren't stainless
Awesome thanks for the info I’m not getting the height that the 24V is supposed to be getting almost same at my 5.5 was. My manifold has rust deposits in it restricting flow may try the 1 inch manifold and see if that works better
Check with Southeast Softwash. They sell the Reel Deal (Titan clone)
Man flat work kills my back I keep my turbo ok a long Lance but need one of the bent ones fig it would be ezer
Yessir! I have a nice Lance but for the video the gun was better
Heck, just bent the one ya got. 2 hard points on the trailer (or wherever) and giv’er a lil bend… crazy man, crazy! 🤪
… just be sure your handle is in the right position. FYI, Mike H inderlighter (power wash. ) has a video about wand balance.
Hope this info is ok to post on your channel Eric, if not delete and I’ll know. 😊
A surface cleaner would have taken you 1/2 the time. Just my 2 cents
It wasn't about being quick 🤦♂️. I have a surface cleaner. Needed a good video
turbo nozzle hittin the same as the shutter speed of the camera looks wild lol
😎🤙