@@greatscottlab Ich verstehe kein Deutsch, aber ich liebe es immer noch, dein Video auf Deutsch zu sehen (Dies ist eine Google-Übersetzung, daher entschuldige ich mich für Rechtschreibfehler)
@@lelouchevibritannia5364 To answer your question, no. The transformer is connected to the gate of a MOSFET that you may be using to drive a LED or other load. Using a transformer at the gate allows you to do some dirty tricks with a half bridge.
Being an electronics hobbiest, a long time subscriber, and having started learning German a few months back, I strangely find these videos one of the best resources to practise my listening skills! 🤣 pls keep them coming! you're doing a great job! 💪
I am trying to learn German. Thats why I came here. I don't understand anything but your content are too good and I am listening this. Thank you for your high cuality content!
Endlich wieder ein Video in deutsch!! Zusammen mit mir sind es 20 Kommentatoren, die sich darüber gefreut haben 👍👍. Bitte, bitte weiter so. LEG aus der CH.
Ich habe schon immer deine Videos geliebt und jetzt höre ich dich zum ersten Mal deutsch sprechen!!! Dankeschön!!! Ich hoffe du machst weiter zweisprachig, denn dass trainiert mich als Elektroniker für Geräte und Systeme sehr gut im Kopf... Ich hatte schon immer eine Vermutung, aber spätestens seit der Simi (Simmi) war ich sehr verwundert wann denn endlich ein deutsches Video kommt... Danke Great Scott für die vielen und lehrreichen Elektronikvideos von dir!!! Mach weiter so!!!
wäre die berufsschule mal so informativ gewesen wie deine videos. wie immer sehr gut erklärt, sogar ich als voll ausgebildeter elektroniker für geräte und systeme lerne hier hin und wieder noch was dazu :D weiter so!
Hallo @GreatScott! Abo läuft eh, Daumen hoch selbstverständlich :-) Vielen Dank für das Video ! Mich würde mal interessieren, wie man mit MOSFET´s Ströme von 200A / 300A bei 12/24/36/48V= schalten kann. Einfach mal 10 Stk. 20A/30A 50V MOSFETs wird vermutlich nicht funktionieren. Das wäre wohl zu einfach ? Das Ganze sollte möglichst Kurzschlußfest sein (wäre aber optional). Das Ganze soll auch nicht mit 180 kHz oder so funktionieren, sondern nur als einfacher Ein-/Ausschalter ( wie von Hand halt). Vielleicht wäre das mal ein Themenvorschlag für Grundlagen zur Parallelschaltung von MOSFET´s ? Viele Grüße und weiterhin viel Spaß beim Elektronik Basteln !
I already saw the English version, so I understood everything in every part you said, so now I know what are you exactly saying😂😂 Sooner or later, I will learn Dutch language too!!
Ich habe bereits den ersten Teil der Serie verfolgt und hatte eine ähnliche Situation. In meinem Beispiel war die Anforderung ein PWM Signal eines Lüfters zu manipulieren. Im Prinzip sollte die PWM Leitung des Lüfters aufgetrennt werden und über ein +5V 25KHz PWM Signal Potentialfrei geschaltet werden. Bei der Schaltungsentwicklung war ich immer zwischen der Verwendung einer reinen Mosfet-, oder Optokoppler Schaltung hin und hergerissen. Die Frage die sich mir nach dieser Videoreihe stellt, warum du hier so aufwendige Mosfet respektive Gate Driver IC´s verwendest und nicht mal einen Optokoppler im Beispiel auf der TTL Seite eines Mikrocontroller wie den Arduino. Mich würde daher interessieren wie du so eine Schaltung realisieren würdest? Also nicht die Last (bspw. Lüfterdrehzal) durch Spannungsregelung zu verändern sondern durch die Anpassung eines bspw. +5/12V PWM Signals mit höheren Frequenzen wie beispielsweise 25KHz. Vielleicht wäre das anlehnend an diese Videoreihe mal ein Video wert. Konventielle Relais kommen ja aufgrund der schenllen Schaltgeschindigkeit in Frage. Ich habe keine Erfahrung mit beispielsweise PhotMos-Relais. Hast du Erfahrung damit und wären diese eventuell geeignet?
Die betonung is etwas „unnormal“, vorallem bei s, st, sch, sp, ch, t, etc. Man könnte fast meinen, es handle sich um ein schweizer, der versucht richtiges hochdeutsch zu sprechen 👍😅
Deutsch hört sich bei dir komisch an wenn man dich immer auf deutsch guckt. Aber Arklährungsvideos in deutsch sind gut weil ich in englisch manchmal nicht alles verstehe. #besteryoutubergreatscott
Hey I want a diy 180v DC variable supply please suggest some project around 300-500W please please I really need it. :( and no such thing is available in my area supply voltage in our area is 220ac
Gibt es noch außer Würth Electronic andere Sponsoren, die ein deutsches Video verlangen? Da du bereits das deutsche Skript zuerst verfasst, wäre nicht immer zusätzlich eine deutsche Version denkbar? Aber ich weiß, du hast viel zu tun.
Can you create a video about, how to create a phone at home. Or which parts used to create a phone like Samsung, LG or other brand’s phones. Edit: Thanks! 🙂
Hello - I watched your load cell video. I am currently developing a product that would require a high temperature load cell. Are you aware of any in the market?
Was zum? Hat mir einer heimlich nen Babelfish ins Ohr gepflanzt als ich geschlafen habe oder ist das Video wirklich komplett auf Deutsch statt Englisch? Oo
At first, I thought the title doesn't make sense to me.... I was like.. Lemme check out and see what did he make...... I now realised it is in German....😂😂😂
Jetzt nichts schlimmes, aber man hört dein atmen einfach immer zwischen den Sätzen. Nur so als Hinweis. Vielleicht ist es dir auch egal. Musst ja selber wissen
English version: th-cam.com/video/B7Eqrf2M-Iw/w-d-xo.html
Man notices that your German has become noticeably better! :-)
Keep it up!(
I am a German)
@@G-Crashi isn't he(great Scott) German?
@@Seu_Lunga yes he's in fact a german
Yes. I am German😅 But thanks anyway
@@greatscottlab Ich verstehe kein Deutsch, aber ich liebe es immer noch, dein Video auf Deutsch zu sehen
(Dies ist eine Google-Übersetzung, daher entschuldige ich mich für Rechtschreibfehler)
As a german-speaker, I can confirm this voiceover sounds cursed
True haha
My brain tries to listen in English.
Oh ja, vorallem wenn man das englische gewohnt ist
Er muss sich beim Deutsch-sprechen halt mindestens genauso anstrengen, wie beim Englisch, sonst schlägt das Sächsisch durch...
@@graealex ... dann wäre mal noch ein drittes Video, mit entspannt, original sächsische Stimme super! 👌🏽👌🏽
Sleepy me realised 2 minutes later that the video is not in English🥱
Btw what's this transformer MOSFET driver for? Is it for controlling brightness of LED?
@@lelouchevibritannia5364 watch the English version lol. It's for Tesla coil
Yep. There is an english version. The first comment has a link
Aight thanks
@@lelouchevibritannia5364 To answer your question, no. The transformer is connected to the gate of a MOSFET that you may be using to drive a LED or other load. Using a transformer at the gate allows you to do some dirty tricks with a half bridge.
I saw the English version
I am here because I got the notification
really learn a lot from your videos
Thanks mate👌
Being an electronics hobbiest, a long time subscriber, and having started learning German a few months back, I strangely find these videos one of the best resources to practise my listening skills! 🤣 pls keep them coming! you're doing a great job! 💪
Thanks mate😁
TH-cam should add a feature that lets creators add dubbed versions of different languages, same as Netflix'.
YES!
This is a very good video to learn German, the dialogue is exactly like the English one
Wenn du deutsch sprichst, höre ich im Hinterkopf immer deine englische Stimme - da besteht eine starke Assoziation 🤪
Wie immer, top präsentiert! 👍🏽👍🏽
Danke👍
Why am I here?
I have watched it
I couldn't understand anything
Still I will give a veiw
Thanks mate✌
Geil eine Deutsche Version 🔥🔥🔥
I am trying to learn German. Thats why I came here. I don't understand anything but your content are too good and I am listening this. Thank you for your high cuality content!
You are welcome😁
As someone who took three years of German in highschool I can confirm... I did not pay attention in class...
It's even wierd for germans because it sounds like he's just translating the English script in Google translate and uses it in his wierd tone.
Endlich wieder ein Video in deutsch!!
Zusammen mit mir sind es 20 Kommentatoren, die sich darüber gefreut haben 👍👍. Bitte, bitte weiter so.
LEG aus der CH.
Rammstein, Mercedes Benz
please do more like these so i can learn german
I really like the things I learn in the video plus i learn better german, greetings from Holland.
Ich habe schon immer deine Videos geliebt und jetzt höre ich dich zum ersten Mal deutsch sprechen!!! Dankeschön!!! Ich hoffe du machst weiter zweisprachig, denn dass trainiert mich als Elektroniker für Geräte und Systeme sehr gut im Kopf... Ich hatte schon immer eine Vermutung, aber spätestens seit der Simi (Simmi) war ich sehr verwundert wann denn endlich ein deutsches Video kommt... Danke Great Scott für die vielen und lehrreichen Elektronikvideos von dir!!! Mach weiter so!!!
Ich bin Deutsch, aber gucke so viele englische Videos, dass es sich schon wieder seltsam anhört.
Der sächsische dialekt 10/10 xD
Ich liebe deine Videos
Danke😁
I just love you've already had your hands on the new EDU33212A, looking forward to to so too.
Btw, great video again. Keep it up!
from time to time youtube will recommend the German version of your videos and i always have to watch.
wäre die berufsschule mal so informativ gewesen wie deine videos. wie immer sehr gut erklärt, sogar ich als voll ausgebildeter elektroniker für geräte und systeme lerne hier hin und wieder noch was dazu :D weiter so!
M'attendais a une voix plus naturel comme langage maternel
Ce nest pas allamand! Cest français!
Hallo @GreatScott! Abo läuft eh, Daumen hoch selbstverständlich :-) Vielen Dank für das Video !
Mich würde mal interessieren, wie man mit MOSFET´s Ströme von 200A / 300A bei 12/24/36/48V= schalten kann. Einfach mal 10 Stk. 20A/30A 50V MOSFETs wird vermutlich nicht funktionieren. Das wäre wohl zu einfach ? Das Ganze sollte möglichst Kurzschlußfest sein (wäre aber optional). Das Ganze soll auch nicht mit 180 kHz oder so funktionieren, sondern nur als einfacher Ein-/Ausschalter ( wie von Hand halt). Vielleicht wäre das mal ein Themenvorschlag für Grundlagen zur Parallelschaltung von MOSFET´s ? Viele Grüße und weiterhin viel Spaß beim Elektronik Basteln !
I already saw the English version, so I understood everything in every part you said, so now I know what are you exactly saying😂😂
Sooner or later, I will learn Dutch language too!!
Its german
Pepega
Bootstrapping ist, wenn man die Schuhe anzieht :P
Deine Videos sind immer spannend!
bitte mach weiter deutsche videos
bitte
Dieses erste deutsche Video von Elektronik, das ich auf TH-cam gesehen habe ... aber ich kenne auch einen anderen Kanal namens Engineering Mindset
Es gibt immer deutsche Versionen zu den Würth Elektronik videos✌
Thank you for the German version
Danka für den Video. Es hilft mir mit meinem Deutsch.
What an entertaining way to learn German
Uuui, nice, wieder mal ein deutsches video 👍✌️
Actually really nice for practicing German!
Nun häufiger in deutsch ? Schön, wenn es so bleibt.
I’m learning German, these videos are super interesting to watch in both English and German! It’s like they were made for people like me XD
I clicked on the video from my notification and was like "Was ist dis?"
Aber das Geheimnis, warum die Schaltung mit einem Übertrager besser funktioniert als ohne ist ungelöst ...was war denn das Problem mit dem IR2184 ?
Ich habe bereits den ersten Teil der Serie verfolgt und hatte eine ähnliche Situation. In meinem Beispiel war die Anforderung ein PWM Signal eines Lüfters zu manipulieren. Im Prinzip sollte die PWM Leitung des Lüfters aufgetrennt werden und über ein +5V 25KHz PWM Signal Potentialfrei geschaltet werden. Bei der Schaltungsentwicklung war ich immer zwischen der Verwendung einer reinen Mosfet-, oder Optokoppler Schaltung hin und hergerissen. Die Frage die sich mir nach dieser Videoreihe stellt, warum du hier so aufwendige Mosfet respektive Gate Driver IC´s verwendest und nicht mal einen Optokoppler im Beispiel auf der TTL Seite eines Mikrocontroller wie den Arduino. Mich würde daher interessieren wie du so eine Schaltung realisieren würdest? Also nicht die Last (bspw. Lüfterdrehzal) durch Spannungsregelung zu verändern sondern durch die Anpassung eines bspw. +5/12V PWM Signals mit höheren Frequenzen wie beispielsweise 25KHz. Vielleicht wäre das anlehnend an diese Videoreihe mal ein Video wert. Konventielle Relais kommen ja aufgrund der schenllen Schaltgeschindigkeit in Frage. Ich habe keine Erfahrung mit beispielsweise PhotMos-Relais. Hast du Erfahrung damit und wären diese eventuell geeignet?
Мне очень нравится слушать твои видео на немецком ❤️
Ich verstehe und spreche deutsch. Wo kann ich die beste Tesla-Spule kaufen? Was soll ich tun, um die Blitzlänge einer Tesla-Spule zu erhöhen?
Hallo! tolles video! Danke. Darf ich den Schaltplan von diesem Board zur Verfügung haben?
Also ich finde gut dass du deutsche Videos machst. Aber irgendwie klingt das nicht "natürlich"
rly? finde ich schon....
Ist schon seltsam
Liegt vll daran, dass man meine englische Stimme häufiger hört😅
Die betonung is etwas „unnormal“, vorallem bei s, st, sch, sp, ch, t, etc.
Man könnte fast meinen, es handle sich um ein schweizer, der versucht richtiges hochdeutsch zu sprechen 👍😅
i know a little bit of german, but im here!
Deutsch hört sich bei dir komisch an wenn man dich immer auf deutsch guckt.
Aber Arklährungsvideos in deutsch sind gut weil ich in englisch manchmal nicht alles verstehe.
#besteryoutubergreatscott
Thanks😁
What are you talking, but sounds good,
Hey I want a diy 180v DC variable supply please suggest some project around 300-500W please please I really need it. :( and no such thing is available in my area supply voltage in our area is 220ac
I don't speak German but I watched the video anyway I don't know why
Nice👌
Si señor.
I can understand German but not speak German. I guess Dutch and German are similar enough. And having a German grandma helped a bit.
Ich bin grad soooo verwirrt, bist du gebürtig Deutsch?
Oder weil ich sonst alles in Englisch gesehen habe
Hallo.
Omg!! 1.5 million now
Gibt es noch außer Würth Electronic andere Sponsoren, die ein deutsches Video verlangen?
Da du bereits das deutsche Skript zuerst verfasst, wäre nicht immer zusätzlich eine deutsche Version denkbar?
Aber ich weiß, du hast viel zu tun.
Nein. Gibt es noch nicht. Und ein deutsches Skript gibt es nur wenn Ich auch eine deutsche Version produziere.
Great video to learn germany
@GreatScott!
hi sir, please review this circuit,
GDS-2A4S1 (High Speed 4 channel IGBT driver)
Can you create a video about, how to create a phone at home. Or which parts used to create a phone like Samsung, LG or other brand’s phones.
Edit: Thanks! 🙂
Ich kann auch Deutsch :)
Willkommen im Club
Das ist gut Heinz!!!
Really good
How many hours did you study to arrive where you are today?
Voice is still the same in this language
True
Huch? Ist das hier jetzt ein Deutschkurs, oder was? ;-) Vielen Dank für deine super Vids...
LooooooooooooooL Your accent is so funny even in your native language! Whoaaaa xddddddd 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
To me he trys to speak espacialy clear so someone who is just learning german can easy understand it... So... yeah
Hello - I watched your load cell video. I am currently developing a product that would require a high temperature load cell. Are you aware of any in the market?
Well I understand it, but have seen it in english. Warum nicht "lass uns anfangen"? :-)
It is my catch phrase. I guess
Heißt es nicht: Überträger?
Why not put this on a separate channel?
Because
please insert indonesia subtittle 🙏👍
I do not speak that language
Nice printing. Which printer you are using?
Why people are complaining about his deutsch voice over?
Isn't he native German speaker?
Yes. I am. But everyone has their own preferences when it comes to voiceovers.
Hey can you please recomend me the best 3d Printer filament supplier in germany
Hey kannst du mir vlt einen 3d Druck fillament Hersteller empfehlen?
Wo wohnst du eigentlich?
LG
Ja bin ich besoffn? Great Scott auf deutsch?
Ich kenne ein bisschen Deutsch, aber ich bin hier!
*ich kann
@@Luis-os2dn Oh! Vielen Dank
whaat !...I like german cause I learn it.
Was zum? Hat mir einer heimlich nen Babelfish ins Ohr gepflanzt als ich geschlafen habe oder ist das Video wirklich komplett auf Deutsch statt Englisch? Oo
Selten ein deutsches Great Scott Video gesehen
Passiert auch nicht zu oft. Vielleicht 3-4 mal im Jahr.
Mach bitte mehr Videos auf Deutsch
DerGroßeScott!
I like😁
At first, I thought the title doesn't make sense to me.... I was like.. Lemme check out and see what did he make......
I now realised it is in German....😂😂😂
Please make video in English as I do not understand German.
Jetzt nichts schlimmes, aber man hört dein atmen einfach immer zwischen den Sätzen. Nur so als Hinweis. Vielleicht ist es dir auch egal. Musst ja selber wissen
Claim ur here before 10k views ticket here
Here✌
Yes you are right we need more horses on moon i am with you
Please create channel for videos in german language
Not interested
Echt komisch dich nach all den englischen Videos auf deutsch zu hören.
Endlich deutsche Videos englisch kann ich nicht so gut verstehen
Can i get a shoutout pls
Now i want to learn germany
kannst du bitte im perfekt reden(anstatt präteritum)
cant understand
Well, I don't understand german 😔
Alli got was Tesla, mosfet and bootstrap
fost
Pinoys!!!
Nice
ahhh Shit ist schon wieder Sonntag ?
Now it wil be cooler
ja
entlich
Why do you have "Ausländer Akzent" though?
Bitte mach mehr deutsche Videos, ich mag dein content kann aber deinen englischen Akzent nicht ausstehen😉