9H (GH) is a status code for a call for gas heat. The EE1 shows you have the primary pressure switch (has yellow or orange wires) in the closed position when the call initiated. Cycle unit off an remove the hose from the pressure switch and be sure its clear and try again, if error (EE1) returns cycle off and remove both wires from switch and try again and If you get an EE2 the switch is bad. I do need the model to be of any more help.
Short and sweet ty
@scottdoran2683 ok thank you
@scottdoran2683 ok l haven't on hot but the Draft motor not coming on. I checked every Save to switches. Is all good l think the Bored bad.
I have 96 furnace and Reading.
Code EE1 .9H
9H (GH) is a status code for a call for gas heat. The EE1 shows you have the primary pressure switch (has yellow or orange wires) in the closed position when the call initiated. Cycle unit off an remove the hose from the pressure switch and be sure its clear and try again, if error (EE1) returns cycle off and remove both wires from switch and try again and If you get an EE2 the switch is bad. I do need the model to be of any more help.