Update: Ok, so I just realize I've been driving it in 4 wheel drive so likely not good. I have these 2 flashing symbols at bottom of dashboard and that only happened after my o-ring on the connector let go and so I have to replace that, as well as transmission fluid, then work the shifter loose by taking out the center console and hope for the best, think it's going to be a spring project for sure, getting lots of snow here and that's that for now..
I'm buying a 97 Discovery 1 tomorrow would like to do something like this.Does the exhaust split at the y pipe or do they still go into one pipe and then split off from the muffler?
@@landroverzone9824 I really like the Disco I bought a couple weeks ago. The gasket between the pipe and manifold is bad so I am replacing it. I was wanting to change out the muffler and do a glass pack. Is that going to cause any problems? I know I'm not going to gain any of power, just like things a little louder
Why am I not seeing the 3 amigos on the dash?😂😂 it’s a miracle. Never seen a disco 2 without the 3 amigo lights. If ur not sure what I’m talking about it’s traction control, air braking system, and downhill braking.
Am in Australia and Want to buy the Hedman Headers - what is the Model number that’s fits your Disco? With freight and exchange rates I want to make sure i get the right ones! I have found a couple Of suppliers online but it’s tricky getting the correct headers for the 4.0litre
I want your tires!! Where did you get the headers and what else will they fit (I mean, can I get them off a used engine from junkyard?) What about back-pressure on your system?
My discovery 2 transmission is leaking and the previous owner says it's the O-ring where the trans lines meet the intercooler? Any ideas on how to fix?
Awesome sound man. I spent too much time looking for lifts on a Discovery 2. Could you recommend one for me. ( I'm new to all this) I'm looking to to put 35s on , will 4 in. Lift be good and what brand of lift ? Thanks again
mike Hi there Mike! I’m using RTE Fabrication on mine! This lift kit it’s been on this truck since 2009 but I add a 2” spacer in the back to level out the truck! You can easily fit 35s and with 37s you will need to trim some of the body. Cheers
Who made the headers? Did you fabricate them yourself? I have dual exhaust set up on my Disco with FlowMasters- sounds awesome and I love the dual exhaust- but no headers- just the stock cast iron. Sounds beastly though...
Hey man can you help me out? My discovery 2 se keeps turning off, I changed the air vale, fuel pump, air mass sensor, I clean the throttle section and still keeps turning off.
That sound ... We definitely need more videos of it !
By the way, is that a home made paint job ?
Yes! Spray paint ! $50 paint job 😁
Excellent
That's tight bro, trying to get my 2003 Disco II SE7 up to this level. Can't wait.
Sounds incredible
hi great car just wanting to now what parts you replaced and put of to make it sound like that
Dexter_ 228 headers..
Sounds great now I’m get some for the p38 to complete exhaust system
By the way What springs are you using to achieve 6 inch lift
Using RTE springs with 2” spacer
What headers did you use? I want to change mine up
Nice beast, Landy Power 👍
That thing is beasty
How do you do it man!? So cool
Update: Ok, so I just realize I've been driving it in 4 wheel drive so likely not good. I have these 2 flashing symbols at bottom of dashboard and that only happened after my o-ring on the connector let go and so I have to replace that, as well as transmission fluid, then work the shifter loose by taking out the center console and hope for the best, think it's going to be a spring project for sure, getting lots of snow here and that's that for now..
I'm buying a 97 Discovery 1 tomorrow would like to do something like this.Does the exhaust split at the y pipe or do they still go into one pipe and then split off from the muffler?
Jeff Longhenry spit at the y pipe
Jeff Longhenry I’m putting headers on another D2 this week! I may be posting another video on just that! So stay tuned!!!
@@landroverzone9824 Awesome man! Please post if you can! The Discovery you have in this video is the baddest Disco I have ever seen!
@@landroverzone9824 I really like the Disco I bought a couple weeks ago. The gasket between the pipe and manifold is bad so I am replacing it. I was wanting to change out the muffler and do a glass pack. Is that going to cause any problems? I know I'm not going to gain any of power, just like things a little louder
what brand are these headers
They are Headman Headers! Cheers
legend cheers
Part number 39800??
Why am I not seeing the 3 amigos on the dash?😂😂 it’s a miracle. Never seen a disco 2 without the 3 amigo lights. If ur not sure what I’m talking about it’s traction control, air braking system, and downhill braking.
Rocco Estes yeah I know, mine has never suffered from that issue before!! Thanks! 🙌🏽🙌🏽🇬🇧
Wow that’s amazing!!!! Mine has had it since day one
Three Amigos are not hard to fix. Mine were from the sensors on the front wheel. Couple of hours and done.
I've gotten to the end of the video and I am in love with that final sound I need to know what you bought and what you made I want that exact sound
Lol thanks brother! Well just the headers and str8 pipe all the way to the end!! For more insight follow me on instagram! I’m @britishrepairs
Following you now love your work
Hey where did you get your exhaust manifolds and headers?
get them from Jeggs performance
@@landroverzone9824 do you have a part number by chance?😓
What tires are those, the sidewall tread is crazy!
Aaron Dann Hi there Mate! Those are Maxxis trepadors
What kind of lift to put those tires on?
@@landroverzone9824 boom. thanks.
I wanted to know too.
nice job!!
DiveJumpShooter Thanks!!! 🍻
Am in Australia and Want to buy the Hedman Headers - what is the
Model number that’s fits your Disco? With freight and exchange rates I want to make sure i get the right ones! I have found a couple
Of suppliers online but it’s tricky getting the correct headers for the 4.0litre
Jeff Addinsall let me research the part number for you!
Jeff Addinsall Head man header #39800 that’s the part number
Jeff Addinsall basically any header for the rover V8 engine RR classic, discovery 1 will fit the D2 V8 models! cheers 🍻
Land Rover Zone thanks heaps!!
what size tires??????
Those are 37s/12.5/R16
Sounds awesome man.
LROR Land Rovers Off Road Thanks brother!! I always wach your videos men!! You got a great channel!! 🔥🔥🔥✅🤓
How much you spent on the lift and tires.
greenike39 it was expensive, tires around 2k and the lift around 3k
Which type of headers are these? I’m in the market for a set.
Douglas Stephens Headman headers #39800
I want your tires!! Where did you get the headers and what else will they fit (I mean, can I get them off a used engine from junkyard?) What about back-pressure on your system?
Has removing the heat shields on the motor mounts caused any problems?
Rover Ron Yes, my motor mounts are weld together but for regular stock mounts don’t remove the heat shields, also protect from oil
I literally creamed in my pants when i heard how loud it was at 5:07. 😍😍😍😍
You in FL? I'm in gainesville got a lifted disco as well
Nicholas Swoboda awesome!! I’m in Georgia bro
96 disco vs. O4 Disco2. Which should I buy? Both under 100k miles...
Matty Tac the O4 hands down!
Land Rover Zone went and saw the 04 today, buddy said it has a blow head gasket. And is asking $4k, walked away...
The 96 disco! D1s are a 4x4 dream.
Where did you get that rear bumper from
james phosy From Tactical Rovers!
My discovery 2 transmission is leaking and the previous owner says it's the O-ring where the trans lines meet the intercooler? Any ideas on how to fix?
Bmx Denver Yes! Bring it to me! I can have it ready in two hrs!
Land Rover Zone where are you located
Alpharetta Georgia brothet
You sound crispy papi.
Beast
Awesome sound man. I spent too much time looking for lifts on a Discovery 2. Could you recommend one for me. ( I'm new to all this) I'm looking to to put 35s on , will 4 in. Lift be good and what brand of lift ? Thanks again
mike Hi there Mike! I’m using RTE Fabrication on mine! This lift kit it’s been on this truck since 2009 but I add a 2” spacer in the back to level out the truck! You can easily fit 35s and with 37s you will need to trim some of the body. Cheers
Who made the headers? Did you fabricate them yourself? I have dual exhaust set up on my Disco with FlowMasters- sounds awesome and I love the dual exhaust- but no headers- just the stock cast iron. Sounds beastly though...
I want to put headers on my Land Rover.😀
Hey man! are you in Georgia? I'm in Smyrna! I need to hit you up if you are.
Too loud. Can you make it factory quiet and still gain more power a fuel economy?
Hey man can you help me out? My discovery 2 se keeps turning off, I changed the air vale, fuel pump, air mass sensor, I clean the throttle section and still keeps turning off.
hey check vacuum solenoid , its just right behind the throttle - $289 british atlantic.
Very nice!
Thank you
Thank you so much
Hi 👋
👋
Pero que clase rumba papapa
I'd pay a 100k for a car like this
It’s for sale!!! Let me know!!
The British jeeps. Both are pretty unreliable but still somehow extremely popular
Где можно купить такие выпускные коллекторы?
Most recently modification of my Land Rover Discovery 2 th-cam.com/video/3gnwR1X7OMk/w-d-xo.html
Noise pollution and emissions pollution. Save our planet- stay stock.