@@elevator_satellite I pressed the door open button on one just as the lift started moving, and it actually opened its doors and safety broke it’s self at about 2 inches off the floor! I wouldn’t have thought the logic would be stupid enough to allow it’s self to do that lol!
M R L's are the worst thing that ever happened to elevators. Impossible to provide a detailed inspection and insure that the safeties are indeed working. Too much is dependent on the controller telling you the safety's are working. YES these elevators ride nice but that's all I can say.
Belts are a sort of trap to get building owners hooked. A counter counts the start stops of the car. And when it hits a predefined number there is nothing you can do but have the belts changed. ( for almost the half of the price of the complete elevator ) . It's not only otis . Kone schindler etc are all the same . I would rather use traditional wire ropes and polyester pulleys instead.
I have a technical question regarding the operation of elevators that use the OTIS belt drive gen2. What is the lifetime of this belt. How often it should be changed? Could you please send me a service manual that states this.
I think the Kone ecodisc is better cause it’s got a really small motor but it can go very fast and ecodisc sounds better than the gen 2 but it’s still a nice lift and it’s quite smooth
این کمربندها بعداز چند سال کارکرد احتمال سر خوردگی خواهند داشت چون سیم بکسل بین شیار های ویvشکل قرار میگیرند وبعد از سالها جواب پس داده البته شرکتها دنبال فناوری های جدید هستند وخود آسانسورهای جی ان تو زمانی که تعمیر کار بصورت اینپیکشن حرکت میکند موقع توقف ترمز شدید میزند
@@ACROCHANNEL Back in the days Otis was better then Mitsubishi and Kone wasn't even a thing. Now Otis is total crap and unreliable and Mitsubishi and Kone literally overtook them in quality.
Traditional wire ropes also stretch, and the belts are basically a polyurethane housing for multiple smaller wire ropes. So, I wouldn't be surprised if these belts stretched too.
Machine roomless (MRL), good in theory, bad in reality. Otis took a bad design from a competitor and actually made it worse. Controller access in the hoistway and can only be accessed from the car top. Any halfwit can see the stupidity in that. Good running while everything is working but a pain when not.
This is a fact, i never understood this idea, what if you have a issue with the break switch or encoder, and the elevator is stuck on the bottom landing, its the biggest pain in the ass to get to that machine now.
Lift companies like Johnson are not elevator manufacturers, the assemble them, the lifts they make is very bad and it is better to use a KONE, Schindler, Otis, and thyseenkrupp.
@@h-aandle Lift gets stuck, you wait for rescue by a certified Otis technician? How long will that take? You can generally climb out if you can open the doors - of course everyones worst nightmare of being sliced in half when the lift starts moving, just as you are climbing through the gap - so the lift needs to be immobilized if any door is manually opened. - Why do they over complicate things?
@@h-aandle He describes what the lift technician must do. Those stuck inside, just have to wait. I was stuck in a lift between floors, about 30 years ago. I just slid the door open and climbed out.
IMPORTANT: They don't say it in the video but they have to install a service box beside the elevator on the top most floor. .... So don't think all the electrical parts will be completely inside. I got cheated on this part because the person sold the elevator to me for 14 Lakhs and didn't even tell me about this important tidbit. I got the elevator after one year and that too near the completion of my house and by then it was too late to ask for a refund(which I am sure they wouldn't have given even with the mistake on their side) or a replacement without such a feature.
What are you talking about? Have you ever seen an electrical system without an electrical or service box? Come on… And in that video they tell you that the heat sensors are in the « Machine » the« Controller » and the « Drive »…. I’m sorry if you didn’t realise but that is kind of obvious..
japanese brand is way more better practically in terms of after sales in lift industry. mitsubishi hitachi fujitec. you get what you paid for in terms of quality. not the best in the market but the quality wise 100 percent. dont get caught with sugarcoated video ads. its a trap.
g t le premier technicien que g monter et installer la premiere gen 2 en tunisie
exactement dans un hotel a jerba l'an 2000
gen 2 i love you
OTIS GeN2's look amazing and the technology in it is a masterpiece!
them otis gentoos are crap.
@@elevator_satellite I pressed the door open button on one just as the lift started moving, and it actually opened its doors and safety broke it’s self at about 2 inches off the floor! I wouldn’t have thought the logic would be stupid enough to allow it’s self to do that lol!
@@Lift.Tracker the ones with door hold button will cancel all floors immediately after you press it.
Yes I like it too but some GeN2s are very slow
I like the gen 2 I usually see it at complex and shopping malls
It's a very nice elevator
Nice proudact from OTIS
THIS LOOKS SO WELL BUILT, NO WAY THIS COMING OFF _Falls Apart On It’s First Trip_
M R L's are the worst thing that ever happened to elevators. Impossible to provide a detailed inspection and insure that the safeties are indeed working. Too much is dependent on the controller telling you the safety's are working. YES these elevators ride nice but that's all I can say.
Very cool video. Thanks for posting and have a nice day too.
Belts are a sort of trap to get building owners hooked. A counter counts the start stops of the car. And when it hits a predefined number there is nothing you can do but have the belts changed. ( for almost the half of the price of the complete elevator ) . It's not only otis . Kone schindler etc are all the same . I would rather use traditional wire ropes and polyester pulleys instead.
Well this is flat out wrong.
this is why Hitachi & Mitsubishi never went the "belt" way. Japanese knows what's best, steel wire rope is the best.
Krone Ecodisc is using wire ropes... They can handle large diameters due to the motor inside the wire rope disk.... ;-)
Riding is awesome no noise and vibration in Otis gen2
Is it available in India for purchase?
@@yaminoshinn1473 yes
@TecStuff yeah agreed
The work is more than wonderful, very beautiful
No. It’s crap
Jack Hartman Actually they are pretty good in America, far better than a 5500 or an Ecodisc. But in Europe the Gen2 is crap
He who controls the processor rules the car. Never select emergency speed down.
Some are able to regenerate electricity when descending, borrowed from the EV industry.
They sure have come a long way. The amount of electricity to power old school elevators was ridiculous.
Nice video of the day.
Very nice...sar
Veary good
This is awesome.
Nice
interesante saludos de peru cia elmeinesac reparcion de motores
I have a technical question regarding the operation of elevators that use the OTIS belt drive gen2. What is the lifetime of this belt. How often it should be changed? Could you please send me a service manual that states this.
I think the Kone ecodisc is better cause it’s got a really small motor but it can go very fast and ecodisc sounds better than the gen 2 but it’s still a nice lift and it’s quite smooth
درایران مارک های اوتیس بسیار گرانتر از کونه است البته من سالهاست بخاطر تحریم برند اوتیس وکونه نصب نکردم
cool otis lifts
Add my favorite music to my radio
picky promo
promo beds 2
B1M brought me here.
I wonder how long these belts last
In a high moisture parking deck
????
How can wear,or splintering, of ropes (belts) be determined visually.?Only stretching can be seen,,
20 years
این کمربندها بعداز چند سال کارکرد احتمال سر خوردگی خواهند داشت چون سیم بکسل بین شیار های ویvشکل قرار میگیرند وبعد از سالها جواب پس داده البته شرکتها دنبال فناوری های جدید هستند وخود آسانسورهای جی ان تو زمانی که تعمیر کار بصورت اینپیکشن حرکت میکند موقع توقف ترمز شدید میزند
Lol these lifts are unreliable then if you compare it to something like Kone Monospace or Mitsubishi NEXIEZ MRL.
@@ACROCHANNEL Back in the days Otis was better then Mitsubishi and Kone wasn't even a thing. Now Otis is total crap and unreliable and Mitsubishi and Kone literally overtook them in quality.
@@rahan573 wait what.... Otis lifts in Asia are really good, KONE is crap in India :(
I heard that you can get rope stretch on with theses belts. Is that true???
No
It's so true and make big time noise
Traditional wire ropes also stretch, and the belts are basically a polyurethane housing for multiple smaller wire ropes. So, I wouldn't be surprised if these belts stretched too.
برند اوتیس بسیار خوب که با دقت نصب میکردیم ولی سالهاست که به ایران نمیفروشند
1:23 2:41 3:59
My classmates and I are going to listen Jessie arcangel
Tecnico de elevador do Brazil
Happy hour is coming soon so get ready for a elevator song
Yay
COOL WITH THAT 👌👍
أفضل المصاعد الكهربائية
Kone Monospace is best
Jacuzzi
Machine roomless (MRL), good in theory, bad in reality. Otis took a bad design from a competitor and actually made it worse. Controller access in the hoistway and can only be accessed from the car top. Any halfwit can see the stupidity in that. Good running while everything is working but a pain when not.
I’ve been a Lift breakdown engineer, MRL could add further access problems to get lift running,
This is a fact, i never understood this idea, what if you have a issue with the break switch or encoder, and the elevator is stuck on the bottom landing, its the biggest pain in the ass to get to that machine now.
@@FunkInMyTrunk manual / battery brake release until the cage at highest floor.
most elveter
من وبسیلر ی از دوستان دوره های نصب وراه اندازی برندهای اوتیس را دیدیم وسالها هم نصب وراه اندازی کردیم ولی متاسفانه دیگر به ایران ندادند
Yes
Yes
why does not add battery to ensure no power situation that passenger enough time to exit and lock secure to Uniform floor not between half floor?
I dont like the idea of thin steel belts holding up a 2000 lb car 30 floors up...
And the speed lol
traditional steel wire rope is the best
YES OTIS
imagin otis gen 3
The otis gen2
0:31 1:49 3:07 4:25
kiu kiu Chow day I like it
Happy hour is coming soon so get ready for elevator music
ST-Fault worst possible experience
What about Johnson Lifts India Ltd? It is also doing good business in India.
Lift companies like Johnson are not elevator manufacturers, the assemble them, the lifts they make is very bad and it is better to use a KONE, Schindler, Otis, and thyseenkrupp.
Tanks
is the motor is a linear motor ?
What about Johnson or TKE?
The pulse
But main drive life time not good.
I do not like these lifts, they sometimes make a lot of noise and aren't even efficient
same as most other elevators!!!
من ودوستانم سالها انواع آسانسورهای otisرو نصب کردیم ولی با قطع همکاری این برند با ایران بیکار شدیم
Otis elevator door noise elevator
so, when stuck between floors, you cannot open the door to get out?
@@h-aandle Lift gets stuck, you wait for rescue by a certified Otis technician? How long will that take? You can generally climb out if you can open the doors - of course everyones worst nightmare of being sliced in half when the lift starts moving, just as you are climbing through the gap - so the lift needs to be immobilized if any door is manually opened. - Why do they over complicate things?
@@h-aandle He describes what the lift technician must do. Those stuck inside, just have to wait. I was stuck in a lift between floors, about 30 years ago. I just slid the door open and climbed out.
Well alarm and phone buttons were invented for a reason 🤷
Is easy when the lift stuck between floors, just only they had batteries to take you until floor and open the door
@@moonants don’t be foolish... it is dangerous to climb out of the lift when it is stuck, use the alarm and phone buttons.
IMPORTANT:
They don't say it in the video but they have to install a service box beside the elevator on the top most floor.
.... So don't think all the electrical parts will be completely inside.
I got cheated on this part because the person sold the elevator to me for 14 Lakhs and didn't even tell me about this important tidbit. I got the elevator after one year and that too near the completion of my house and by then it was too late to ask for a refund(which I am sure they wouldn't have given even with the mistake on their side) or a replacement without such a feature.
What are you talking about? Have you ever seen an electrical system without an electrical or service box? Come on…
And in that video they tell you that the heat sensors are in the « Machine » the« Controller » and the « Drive »…. I’m sorry if you didn’t realise but that is kind of obvious..
why is everyone saying this elevator is worse
Pit controls
Like pt 29
Man I hate MRLs
Всё хорошо - ещё бы кто на русский перевёл! :-))
Eeeeee
japanese brand is way more better practically in terms of after sales in lift industry. mitsubishi hitachi fujitec. you get what you paid for in terms of quality. not the best in the market but the quality wise 100 percent. dont get caught with sugarcoated video ads. its a trap.
в
Elevatores not cameras motors îs monstrozity , horror !
EWWWWW CRAPY OTIS TIME!
Horrible Idea! Garbage!