I am new to RGB and this looks exactly like what I want. They are asking way too much for RGB these days - they should be as reasonably priced as this set and your conclusion comments were spot on. I can imagine once I choose my favourite colours I am not going to be changing them much. So that little remote is a great idea and not have to piss about with software.
I bought an Aerocool Mirage 12 fan along with an H66F controller hub, I also used an Aerocool Lux 550 ARGB PSU, at first I controlled the fan via remote, all functions ran normally, but when I connected it to the PSU, the remote couldn't be used anymore, I wanted to adjust the fan speed. and the color of the lights no longer works, please provide a solution
Hello there - thanks for the review. Just had a quick question - how are the noise levels on full load? Not looking for anything Noctua levels but also do not want a small jet engine taking off on my desk every now and again!
So I bought these. I also have some corsair ram and RGB CPU cooler and some RGB Lian Li Fans. Guess which RGB units are the fussiest and fiddliest to set up and maintain ? Well it's not the Aerocool fans. You just use the included controller and simply set and forget. Everytime I boot up the Aerocool fans they just stick to the settings and colours I have them on whereas with the Lian Li and Corsair RGB you seem to constantly have to run their proprietary software and both seem to "forget" their settings every so often especially if you clean your ram. Not worth the bother when you can use these cheaper Aerocool ones that just work out of the box and are set and forget.
The AirSlow on the Deep cool is around 15% better according to specs, but the Noise level of the Deep cool at its quietest is rated the same as the AeroCool at it highest, The Mirage 12 pro set is rated at 17.8dB and the Deep cool is rated from 17.8-27dB. So its really down to you. Higher Airflow and more noise, or a bit lower airflow, quieter and better looks.
Hello! I have ASUS B550M-A (WIFI). I have ARGB and PWM connectors and I was wondering which should be the preffered option ? connecting the fans on mobo or using them with the controller? Also, if I connect them on Mobo, the controller will still working (like overriding mobo settings, if requested?)
I would like to operate the fans alone without MoBo or PC. Can you recommend a power supply to me? I have a power supply with 12V 2A, the fans start to spin, but do not light up. Thank you!
so, these are only any good for taking air out of the case, unless you're mounting them as front intake fans? because reversed there's no mirror at all
Nice review.Quick question: is there any way not to use sata for power? I mean something like usb adapter. I want to use them for diplay out of my tower
Hello, can i just connect the sata and the chasis fan pwm and just ignore argb header if i dont have the 3 pin on my motherboard ?To use the remote control and have the speeds managed by the bios?
Hi there. Good job on the explanatory video. I have one question. Can the ADD_RGB inputs receive any kind of typical 3pin connectors (typical meaning all the connectors of the "3pins with one missing slot in between") or does it only accept other products from aerocool? I am interested in routing the connector of my new BeQuiet 500DX case and my Corsair CX750F RGB PSU there to syncronise it with the fans. Case and PSU have the typical ARGB connectors, the 3pin ones with the missing slot in between. Thanks in advance.
Just to clarify, would I be able to connect the AeroCool Mirage 5 cooler and an ARGB strip to the two additional '3rd Party ARGB' connectors? Thanks in advance :)
Excellent, thanks for the quick response! Do you know of this has any issues with asrock polychrome or asrock boards? The website seem to shy away from saying either way
@@domainiac Unfortunately I do not have any Asrock boards to test it with, but i have not heard of any issues, worst case scenario you can always just use the remote and not connect to the motherboard
Nicest fans I've ever seen and too bad they're not available anymore whenever I find something I like currently unavailable so sad and the search goes on.
Hi, I am pretty new to Pcs I was just wondering wether I could hook an rgb strip to the Third Party Headers and if so is there anything i have to watch out for? Sorry for my bad English:)
you can add upto 2 ARGB devices, so you need to make sure when you get a light strip you get one that has a 5V ARGB connector in it, looks like 4 pins with one missing
@Tech for Techs I have another Question, would you be abled to control the third Party devices with the remote or would you need a connection to the motherboard?
The Hub will support upto 6 of these with this special connector, and upto 2 with the standard ARGB connector, have not tried it wqith splitter cables but in theory you should be able to add more
The PWM does not work , and You cannot see the Fans either in BIOS or MOBO software in Windows!!! so useless if wanting to control Fan speed via MOBO!! Think it is bad marketing from Aeorocool and You should have addressed this instead of skipping that part!
Too bad the backside is so ugly. I have to pass on this because I need intake bottom fans which are highly visible through the glass panel. I have to say it's not easy to find fans with an attractive back; I hope manufacturers will start to focus more on that aspect of the aesthetics too.
💥 Buy now 💰 amzn.to/4csPcDJ
💥www.tftmax.com 💥 TECH MAX TRADE SHOW! 💥
I am new to RGB and this looks exactly like what I want. They are asking way too much for RGB these days - they should be as reasonably priced as this set and your conclusion comments were spot on. I can imagine once I choose my favourite colours I am not going to be changing them much. So that little remote is a great idea and not have to piss about with software.
I bought an Aerocool Mirage 12 fan along with an H66F controller hub, I also used an Aerocool Lux 550 ARGB PSU, at first I controlled the fan via remote, all functions ran normally, but when I connected it to the PSU, the remote couldn't be used anymore, I wanted to adjust the fan speed. and the color of the lights no longer works, please provide a solution
💥 Buy now 💰 locally.link/2cH2 *Ad
0:00 introduction
0:28 B-roll
0:41 Packaging
3:05 In the Bag
8:36 Testing
11:55 Conclusion
Hello there - thanks for the review. Just had a quick question - how are the noise levels on full load? Not looking for anything Noctua levels but also do not want a small jet engine taking off on my desk every now and again!
So I bought these. I also have some corsair ram and RGB CPU cooler and some RGB Lian Li Fans. Guess which RGB units are the fussiest and fiddliest to set up and maintain ? Well it's not the Aerocool fans. You just use the included controller and simply set and forget. Everytime I boot up the Aerocool fans they just stick to the settings and colours I have them on whereas with the Lian Li and Corsair RGB you seem to constantly have to run their proprietary software and both seem to "forget" their settings every so often especially if you clean your ram. Not worth the bother when you can use these cheaper Aerocool ones that just work out of the box and are set and forget.
Which one is better??
Cooler master mf120 halo
Or
Aerocool Mirage 120??
The explanations very good and clear, especially for me who have no idea how to use rgb fan before. thankss, helpful ⭐️⭐️
Thanks for Watching and glad you liked the video
Can you see the single leds?
The AirSlow on the Deep cool is around 15% better according to specs, but the Noise level of the Deep cool at its quietest is rated the same as the AeroCool at it highest, The Mirage 12 pro set is rated at 17.8dB and the Deep cool is rated from 17.8-27dB. So its really down to you. Higher Airflow and more noise, or a bit lower airflow, quieter and better looks.
Can you adjust fan speed from the bios?
@@25566 I have same question
If my Motherboard doesn't support ARGB will they still work because these look really good and I'm in need of new fans.
Hello! I have ASUS B550M-A (WIFI). I have ARGB and PWM connectors and I was wondering which should be the preffered option ? connecting the fans on mobo or using them with the controller? Also, if I connect them on Mobo, the controller will still working (like overriding mobo settings, if requested?)
Can you have 2 static colours at once! Ie Blue and Purple?
Are these loud? Ive bought miwatt fans from Amazon and they r loud af
Thank you so So Much!!!!! You save me with my fan choice!
I would like to operate the fans alone without MoBo or PC. Can you recommend a power supply to me? I have a power supply with 12V 2A, the fans start to spin, but do not light up. Thank you!
so, these are only any good for taking air out of the case, unless you're mounting them as front intake fans? because reversed there's no mirror at all
How do these compare to the Deepcool cf120 plus?
If i want argb and fans speeds, do i use argb header and 4pin to cha fan header? No molex needed?
That’s correct, 4 pin fan header and 5v ARGB header is all you need for the ARGB version
Are they static fans or airfow?? And how loud are they in dbs??
Is it compatible with gigabyte fusion 2.0?
Can this fans also be synced using software? let's say I want to sync it with my gpu's rgb. I'm new to building a pc
Nice review.Quick question: is there any way not to use sata for power? I mean something like usb adapter. I want to use them for diplay out of my tower
can i connect 2 more fans from a different manufacture on the 3 pin 5v connectors on the hub and have them all sync ?
Hello, can i just connect the sata and the chasis fan pwm and just ignore argb header if i dont have the 3 pin on my motherboard ?To use the remote control and have the speeds managed by the bios?
Thank you so much, just ordered myself some Duo12 pro with this controller and helped me a lot!
It will look so good in the phanteks metallic gear nei qube in the side isin't it
what about the db noise level?
Can i put this into a asus h310 r2.0 motherboard?
Как раз себе такие купило, скоро обзор сделаю тоже
Have you tried to sync with aura sync or mystic light or any other software?
If you want to install more than 6 fans, can you get this kit a second time and go with two controllers?
should be able too, as long as you have 2x spare SATA power connectors, you make find the controller alters the lights together if using the remote
Hi there. Good job on the explanatory video. I have one question. Can the ADD_RGB inputs receive any kind of typical 3pin connectors (typical meaning all the connectors of the "3pins with one missing slot in between") or does it only accept other products from aerocool? I am interested in routing the connector of my new BeQuiet 500DX case and my Corsair CX750F RGB PSU there to syncronise it with the fans. Case and PSU have the typical ARGB connectors, the 3pin ones with the missing slot in between. Thanks in advance.
Just to clarify, would I be able to connect the AeroCool Mirage 5 cooler and an ARGB strip to the two additional '3rd Party ARGB' connectors? Thanks in advance :)
I came here for this
Yes you should have no issues, we connected the Mirage 5 to the 12 Pro kit and it worked fine. with room for another ARGB device
Excellent, thanks for the quick response! Do you know of this has any issues with asrock polychrome or asrock boards? The website seem to shy away from saying either way
@@domainiac Unfortunately I do not have any Asrock boards to test it with, but i have not heard of any issues, worst case scenario you can always just use the remote and not connect to the motherboard
@@TechforTechs thank you, appreciate you taking the time to reply!
Nicest fans I've ever seen and too bad they're not available anymore whenever I find something I like currently unavailable so sad and the search goes on.
Sweet, just ordered 6 of em
Is it loud ?
on load you can hardly hear them, on high they can get a little loud, depends on how fast you want them to spin
Thanks man! Subbed
Hi, I am pretty new to Pcs I was just wondering wether I could hook an rgb strip to the Third Party Headers and if so is there anything i have to watch out for? Sorry for my bad English:)
you can add upto 2 ARGB devices, so you need to make sure when you get a light strip you get one that has a 5V ARGB connector in it, looks like 4 pins with one missing
Ok, thanks a lot!
@Tech for Techs I have another Question, would you be abled to control the third Party devices with the remote or would you need a connection to the motherboard?
@@Max-zy7lq You can control all items via the remote as long as they are plugged into the controller,
Thanks this helped me very much
Thanks for watching and glad you liked it
How many argb fans can you connect to the hub? Only these 3?
The Hub will support upto 6 of these with this special connector, and upto 2 with the standard ARGB connector, have not tried it wqith splitter cables but in theory you should be able to add more
@@TechforTechs ok thanks
If I buy 2 pack of 3 fans ( same brand ) , can I connect the other 3 fans to the only hub?
Yes, you can connect them to 1 hub same brand to work properly
The fans are good but it sad to say that each fan has a 6 pin.
A b550m aorus pro-p does have addressable rgb's right?
When looking on the site it just says "addressable led strip headers"
The board does have 2x ARGB headers according the the website as well as 2x older RGB headers, so you should be fine
Thanks
That fans will work with iCue Corsair system
He's voice sounds like Clarkston from top gear
lol, he comes from around 30 miles away from where we are, and on the bombshell
good video
Thanks for watching
Thx man
The PWM does not work , and You cannot see the Fans either in BIOS or MOBO software in Windows!!! so useless if wanting to control Fan speed via MOBO!! Think it is bad marketing from Aeorocool and You should have addressed this instead of skipping that part!
hey i know im late but did u manage to plug the 4 pinn fan cable from the controller to motherboard header
Too bad the backside is so ugly. I have to pass on this because I need intake bottom fans which are highly visible through the glass panel. I have to say it's not easy to find fans with an attractive back; I hope manufacturers will start to focus more on that aspect of the aesthetics too.