Why wouldn't you just hook each lower clamp pad to each other or if they get in the way, take the lower pads off and bolt the bars together with a single bolt? What benefit do you get with that wooden connector?
The embarrassing part of all this put it on you tube, and with your idea you can make it as long as you want with anything you have on hand, i was wondering what this guy is making.
My only thought is maybe a single bolt was tried and twisted when you really tighten it? Probably requires more pressure than these clamps produce though. Honestly if that failed I’d use two pieces of plumbers strapping(hanger iron as some call it) At which point you can make it as long as you want, of course it would take almost a full minute to really dial it in perfect…..
i made such thing years ago just a thick metal bar with lot of holes , it was fast made and i made a whole bunch of them so now i can whenever i want extend all my glue clamps, a simpler version of yours. but yours looks better of course , mine is just a strip with holes.
That just puts uneven pressure on the thing you are trying to clamp, which means it's potentially going to bow. You don't have the bar to keep the clamp heads aligned, so in most cases this would be if you had no other option type scenario. Otherwise just buy/make a bar clamp.
Решение - один болтик с гайкой в те отверстия, и всё ..... 🤷♂️ Можно проще Но всё равно было приятно смотреть за аккуратной и профессиональной работой. Поставил лайк 👍
this is great for certain applications that don't require centered clamping force; you can see that the cauls you use want to pinch up and inward because of the angle of the clamping force. still, this could save us in a pinch.
This is how you turn something really simple out of something what would likely be very hard. Reminds me about Woody Hyezmar’s Woodworking Bible which is being given away and can try go’ogling, but I’m not so sure, have a good one!
✅✅ Ready to elevate your woodworking skills? Access your free course now:
➡ Get your free interactive woodworking course here:
bit.ly/sawdust-addict
You are a source of life energy, thank you very much
Very good!
Это же какую смекалку надо иметь, что вместо того чтоб купить длинную струбцину, заниматься вот этой фигнёй
There's 5 minutes im never getting back.
Brilhante ideia, Will! 😃
Vou fazer alguns desses! Sem dúvida alguma!
Abraços e se mantenha seguro aí com sua família! 🖖😊
Valeu amigo! Obrigado por assistir e deixar seu comentário. Tenha uma ótima semana abençoada. Cuide-se bem! 😉👍🙏
GREAT idea!! THNX 4 sharing this!!
Was für ein Aufwand, ein Brett mit zwei Löchern funktioniert genau so!
Silly me! 🤦🏻 I took the clamp ends off and just joined them together with a bolt. Sadly it only took 1 minute to achieve 😔
Why wouldn't you just hook each lower clamp pad to each other or if they get in the way, take the lower pads off and bolt the bars together with a single bolt?
What benefit do you get with that wooden connector?
You have echoed my thoughts.
The embarrassing part of all this put it on you tube, and with your idea you can make it as long as you want with anything you have on hand, i was wondering what this guy is making.
My only thought is maybe a single bolt was tried and twisted when you really tighten it? Probably requires more pressure than these clamps produce though. Honestly if that failed I’d use two pieces of plumbers strapping(hanger iron as some call it) At which point you can make it as long as you want, of course it would take almost a full minute to really dial it in perfect…..
Thanks!
Or use a store bought perforated flat bar to connect the two for under $5 and save your time. Or buy a pipe clamp. Or use a parallel clamp. Or...
Thank you for sharing thanks for using and sharing your knowledge
😉👍🙏🙏
MM77 Approved 👍🏻👍🏻
Thanks for watching my friend
i made such thing years ago just a thick metal bar with lot of holes , it was fast made and i made a whole bunch of them so now i can whenever i want extend all my glue clamps, a simpler version of yours. but yours looks better of course , mine is just a strip with holes.
Thank you for watching and leaving your comment 😉👍🙏
Retailers don't give a crap.
شكرا 👏👏
Thank you for watching and leaving your comment 😉👍🙏
Dude, you still had to buy two clamps, retailer wins.
Fine take the heads off to make one long one if you need. By one single bolt through the bars would have worked better
Симпатично. Но сцепить две струбцины можно и гвоздём, загнутым в виде "С" или "S". За 1 минуту.
That just puts uneven pressure on the thing you are trying to clamp, which means it's potentially going to bow. You don't have the bar to keep the clamp heads aligned, so in most cases this would be if you had no other option type scenario. Otherwise just buy/make a bar clamp.
Решение - один болтик с гайкой в те отверстия, и всё ..... 🤷♂️
Можно проще
Но всё равно было приятно смотреть за аккуратной и профессиональной работой.
Поставил лайк 👍
Another video of someone overcomplicating a simple task and passing it off as some kind of clever "hack"
this is great for certain applications that don't require centered clamping force; you can see that the cauls you use want to pinch up and inward because of the angle of the clamping force. still, this could save us in a pinch.
...then throw everything away except one of the nuts and bolts and just connect the bars to each other directly...
Bello,ma non facevi prima usando 2 piastrine in metallo ?
couldn't you get the same effect by simply bolting the two clamps together through the hole?
Clever lad.
그냥 구멍에 볼트 혹은 뭐 못 같은거 하나 넣고 두개를 연결해 버리면 될 것 같은데요
Your wife must be so grateful to have all this free and relaxing time on her hands.
flat bar do same job,
I bolt the clamps directly together, head off one and tail off the other.
Thank you for watching and leaving your comment 😉👍🙏
Silly me, I just use sections of old bike chain.
Das funktioniert auch ohne das Holzgebildet, z.B. mit einem einfachen Blechstreifen. Manche Leute machen sich gerne unnötige Arbeit.
Yet another solution looking for a problem.
А чё нельзя взять две полоски металлические и просверлить отверстия о соеденить винтами или болтиками и полоски подлиннее и по не сколько отверстий?
И зачем такие заморочки если можно просто скрепить зажимы через их отверстия или звено
от цепи велосипеда.
Wow that was a waist of time. Just use the right clamp
Для этого стоило огород городить? Достаточно одного бруска с двумя отверстиями и двумя болтами с гайками. Да, Вы явно не русские.
Desnecessário, é só unir um grampo diretamente no outro....fala sério.
Дураков не пашут, не сеют, они сами родятся.
Что за х.......? Сразу болтикам не крепить?
What a complete waste of time....
Well that was a waste of time.
OLMADI BU İŞ
no talk no watch
waste of my time.
This is how you turn something really simple out of something what would likely be very hard. Reminds me about Woody Hyezmar’s Woodworking Bible which is being given away and can try go’ogling, but I’m not so sure, have a good one!
Офигеть, прям секрет. Гений бля.
Why these announcements? Only the subscription feed is clogged.
Thank you for watching and leaving your comment 😉👍🙏