Thank you for sharing your knowledge and expertise with the world. Keep up the fantastic work! Your dedication to creating high-quality content is inspiring, and I look forward to watching more of your videos in the future.
Hello Sir, Thank you for explaining ABAQUS in a very simple way. Best video I found on TH-cam.. also, Can you please make a video on the Masonry wall (Brick etc) and explain about the Brick-Mortar joint and points related to masonry units? Really need it.. Thank you 🙂
Thank you for the useful video I sudgest you put a donate option (patreon etc) in video description...since these sorts of workshop usually cost a lot and arent as useful or are comparable to your videos. Some people will recognize and donate probably :)
Hello, first of all thank you for the nice and helpful tutorials you helped very much🙏🏼… I’d like to ask how we can apply lateral and vertical loads in beam column frame. Do you have any tutorials that you made ? Specially in steps and loads and boundary conditions.. thanks a lot 🙏🏼
Thank you for this informative video. I have a doubt that if I use step-1 as a general static step and step-2 as a linear perturbation step for this case can we use the same restart procedure?
hello, Dr. ahmed thanks alot for your great best effort, but could i have asking you about the explaining of the restarting job in explicit abaqus ( that you pointed to in your video #35), and what about the differences between it and standard abaqus?????? , at all thanks for helping us
I wanted to suspend and resume the analysis as given in the Abaqus manual but when I'm entering it, it's not working. Tried more than 100 ways to get it right but I'm unable to suspend or resume the file. Suspend worked once but resume isn't happening showing format ['job', 'host', 'port'] and when entering saying "=" should come before ??
ًWonderful content. I do ask you for a video on modeling soil with Cap model. Also a series on Autodesk Robot if this is feasible? There is a ton of videos for robot for the analysis part, but rarely does anybody show the complete step for design, at the end of analysis. Thanks in all cases.
Hi. The job has been aborted due Time increment required is less than the minimum specified. I have followed the instruction you had provided but when I am submitting the job, it says: #job name.res required to restart but it can not be find. do you have any suggestion?
Sorry Sir! Is it possible to restart the job when termination is due to less number of increment means that can i increase number of increment and restart it again? I appreciate your work may God bless you
I got this error: ***ERROR: Error in *NSET/*ELSET: the set ASSEMBLY.CÁLICE._PICKEDSET138 already exists in the original analysis. It cannot be modified upon restart. ***NOTE: DUE TO AN INPUT ERROR THE ANALYSIS PRE-PROCESSOR HAS BEEN UNABLE TO INTERPRET SOME DATA. SUBSEQUENT ERRORS MAY BE CAUSED BY THIS OMISSION What can it be? Do you have any ideas to solve?
Thanks for this! But what if, there are changes, for example additional reference point and history output but no changes in the model's geometry or mesh, how would I start again with the Job? Note, I already done with the Job Analysis, but realized that I need another history output and reference point.
There should not be an issue with adding a history output or a reference point. For you reference, ABAQUS manual states the following: "ABAQUS imports imperfection data through the user node labels. ABAQUS does not check model compatibility between both analysis runs. Node set definitions in the original model and the model with the imperfection may be different. Care must be taken for models in which ABAQUS generates additional nodes (for example, the nodes generated for contact surfaces on 20-node brick elements). In such cases you have to ensure that the models for both analysis runs are identical and that the nodal information for the generated nodes is written to the results file" That being said, I don't see a reason why the reference point can not be defined in the original model as well.
Man, this is the best abaqus tutorials series ever seen
Thank you for sharing your knowledge and expertise with the world. Keep up the fantastic work!
Your dedication to creating high-quality content is inspiring, and I look forward to watching more of your videos in the future.
Thanks, Ahmed. It was a very useful video, which guides and explains how to use 'restart' in ABAQUS. :) Thanks.
Hello Sir, Thank you for explaining ABAQUS in a very simple way. Best video I found on TH-cam.. also, Can you please make a video on the Masonry wall
(Brick etc) and explain about the Brick-Mortar joint and points related to masonry units? Really need it..
Thank you 🙂
Thank you for the useful video
I sudgest you put a donate option (patreon etc) in video description...since these sorts of workshop usually cost a lot and arent as useful or are comparable to your videos. Some people will recognize and donate probably :)
Thank you very much sir for this useful tutorial.
Thanks for your sharing🥰It is a very useful tutorial. I'd like to ask how can we restart a job use linux command?
Thank you! This is very useful
Thank you for sharing. This is so useful information.
god bless you man you are a life saver
Hello, first of all thank you for the nice and helpful tutorials you helped very much🙏🏼… I’d like to ask how we can apply lateral and vertical loads in beam column frame. Do you have any tutorials that you made ? Specially in steps and loads and boundary conditions.. thanks a lot 🙏🏼
very very helpful and brilliant video. Thank you sir
Thanks you for your nice support!
1 MILLIONS THANKS YOU!!!!
thank you for sharing your knowledge in this great videos, And i want to ask how to do the same procedure in explicit analysis?
Well done Ahmed.
thanks a lot boss..
thanks a lot
Hi Dr. Ahmed, could you provide us with ABAQUS vedio about simulating prestressing force in tendons for concrete beams .
Thanks in advance
Could you also show how to setup the restart run using inp files?
Hello Ahmed,
can you please make a video for Contacts ie edge to edge contact for abaqus standard, implicit, How to approach?
Thank you for sharing. I was wondering if you can make a video about punch test under biaxial loading.
Thank you for this informative video.
I have a doubt that if I use step-1 as a general static step and step-2 as a linear perturbation step for this case can we use the same restart procedure?
hello, Dr. ahmed thanks alot for your great best effort, but could i have asking you about the explaining of the restarting job in explicit abaqus ( that you pointed to in your video #35), and what about the differences between it and standard abaqus?????? , at all thanks for helping us
Thank you verry much sir.
I wanted to suspend and resume the analysis as given in the Abaqus manual but when I'm entering it, it's not working.
Tried more than 100 ways to get it right but I'm unable to suspend or resume the file. Suspend worked once but resume isn't happening showing format ['job', 'host', 'port'] and when entering saying "=" should come before ??
ًWonderful content. I do ask you for a video on modeling soil with Cap model. Also a series on Autodesk Robot if this is feasible? There is a ton of videos for robot for the analysis part, but rarely does anybody show the complete step for design, at the end of analysis. Thanks in all cases.
benefited a lot
Thank you!
How is it different from the procedure in Abaqus/Explicit?
please make one video on the concrete filled steel tube
Why it said cannot be found: Job-1.res when i want to submit for Job-2?
How to combine both results into single odb file ..Thanks for the video....
can we restart jobs ran with user subroutines?
Hi. The job has been aborted due Time increment required is less than the minimum specified. I have followed the instruction you had provided but when I am submitting the job, it says: #job name.res required to restart but it can not be find. do you have any suggestion?
You need to check the time increment for the analysis step and the time increment for saving the field variables
Sorry Sir! Is it possible to restart the job when termination is due to less number of increment means that can i increase number of increment and restart it again? I appreciate your work may God bless you
I got this error:
***ERROR: Error in *NSET/*ELSET: the set ASSEMBLY.CÁLICE._PICKEDSET138 already
exists in the original analysis. It cannot be modified upon restart.
***NOTE: DUE TO AN INPUT ERROR THE ANALYSIS PRE-PROCESSOR HAS BEEN UNABLE TO
INTERPRET SOME DATA. SUBSEQUENT ERRORS MAY BE CAUSED BY THIS OMISSION
What can it be? Do you have any ideas to solve?
You can not modify the original model geometry/sets when using the restart option.
how about Job with Abaqus/dynamic /explicit? can be the same procedure?
Thanks for this! But what if, there are changes, for example additional reference point and history output but no changes in the model's geometry or mesh, how would I start again with the Job? Note, I already done with the Job Analysis, but realized that I need another history output and reference point.
I only have Step-1.
There should not be an issue with adding a history output or a reference point. For you reference, ABAQUS manual states the following:
"ABAQUS imports imperfection data through the user node labels. ABAQUS does not check model compatibility between both analysis runs. Node set definitions in the original model and the model with the imperfection may be different. Care must be taken for models in which ABAQUS generates additional nodes (for example, the nodes generated for contact surfaces on 20-node brick elements). In such cases you have to ensure that the models for both analysis runs are identical and that the nodal information for the generated nodes is written to the results file"
That being said, I don't see a reason why the reference point can not be defined in the original model as well.
@@AElkady May I also ask how to determine the maximum Shear Force and Maximum Bending Moment for 4-point bending test setup of RC Beam?
I have to use multiple CPUs in my simulation. I tried the restart method but the restart model does not run. Any suggestion on this ?
Not sure if number of CPUs affect the restart option, unless your Abaqus license has limits.
What to do, if you have only one step?
does this work also for an aborded job?
yes
god bless you man you are a life saver