I just want to thank you for your videos. I haven’t taken any courses for welding but have a lot of applications for the skill. Just watching your videos has helped me learn how to weld and saved me so much money. You are great at what you do and the way you have your videos set up is so informational. Keep it up!!
mad respect for a guy who takes time out of his vacation to put together a video for his channel, when he could have just waited until he came back! Nice to see you relaxed and relaxing, Sir! Hope you have an amazing vacation! Now go PLAY!!!!!
I come from the auto repair environment and troubleshooting is perhaps the most important thing that a mechanic must know how to do. Looking at the way you found the problem on the Hobart spool runner proves that you are the best! Thank you for sharing.
Thank you so much for this video, I only started mig welding mild steel about 3 months ago, and not very often, I've a project that needed ally welding and no one wanted to take it on. So in 2 hours this afternoon I went from soldering the wire to the electrode, to bird turd, to stacking dimes in about 2 hours. 4mm plate aluminium, your advice was just brilliant, literally, a thousand thank you's my man 🙏😎
Thank you for this straight forward informative video! Spent a year at welding school and we did not cover mig aluminum. I bought my own spool and used the teachers personal to get a handle on it, he got me in the right direction but this really cleared up any confusion I had. Thanks again!
Great video. Straight to the point and shows everything I came here to see. Been struggling with my Lincoln spool gun (exactly same setup as yours - 210MP and same spool gun), with sooting and really having a hard time keeping the bead without melting the aluminum away. This video helps immensely.
I have a Lincoln power mig 216 machine and got this M100 with it "free". And I love it !!!! I built an aluminum flat bed tow truck bed with it running .035 wire using an .040 tip. The .035 kept fouling up. Once I switched tips, it was flawless !
Ok , So I know this is old, but it's new to me. I'm starting to use the miller spoolmatic at work and I'm looking for all the info I can get on using it. Thanks for taking the time to make this video.
Hey Jody! Had to use the spoolgun here at work for the first time. Watching your video was really helpful, I got to the 'ballpark settings right away, and tweaked them using your examples. You probably cut the time I would have spent on that job in half. Thanks a bunch for your videos.
Good video, subscribed. So I have welded aluminum with 4043 an NEVER had soot issues. With 5356 I always do. Set up was the same: SS liner, tips, pure argon, and "blob-ball" welding ( where I turn down the wire feed while welding until wire forms a pea sized ball on the end, then dip it into place. All I can deduce from this is that 5356 is just dirtier. Correct me if you know differently.
very grateful for these videos Jody, I've gone from knowing nothing to doing mig and stick welding repairs for my job. Very grateful, I thank God for this awesome fun skill and instructor like you!
I've been welding for years with the Lincoln spool gun I find a huge difference in wire I'd love to see you make a video using the Lincoln spool gun and the different manufacturers of wires and your recommendation be great videos as always thank you
I just did a weld test for a job. Not sure what the settings were but dang I had to weld fast. Guy said the welder was maxed out and I had to run a 2f and 3f on I think it was 7 gauge. I've never welded so fast in my life. I tried to do some manipulation like on steel for the 2f but it kept burning through so I stopped and did an extreme whip motion and it came out looking decent, the downhill 3f looked good though(never migged aluminum before, it was weird). Still got the job cause my 2f/3f mild steel weld was "really nice".
thanks for this video...it helped... I've been doing Collision for 26 yrs. I've had this aluminum spool gun from snap-on for the last year or so. I have the snap on mm250sl. I've had this for over 20yrs... finally got a argon bottle last week. I have the tig set up for it too. I will be trying it today on a home repair that is aluminum... again thanks for the insight on the trouble shooting....
Thank you, I've been a different tradie all my life, Bricklayer then licenced Builder here in Australia. A little late in life I spose for me to be learning, but through the years have taught myself a few tricks of the trade :)...Your video I have found is one of the most informative and understandable with regard to Aluminium. You have a good nouse to be able to solve problems with a bit of McGyverism thrown in, good quality work to boot.. I'll never get the years of experience behind me to become a good welder, just enough to be half reasonable is what I'm hoping for. I don't know if you have any on grinding and finishing welds but I'll look. Thanks again.
Jody, I have learned alot from watching, my wife actually watched this one with me and she was like OMG look at those eyes, so I think you have gained another utuber.
I’m doing a project with 1/4” aluminum. It’s a big project with a lot of mass and I’ve been trying to TIG weld it with my 210A Miller machine, but it’s barely enough and it overheats constantly. I want to switch to a spool gun but I’m having trouble figuring out what type of spool gun I need for it. I’ve seen 135A, 150A, 200A, 250A options, etc but what do I actually need? I don’t want to spend too much but it needs to be enough for the job.
Hi Jody, could this setup be used to weld tubing, more specifically I want to build my own T-Top for my boat. Most folks have told me to TIG weld that, but I am not sure if I could pick that up as quickly. Any input on the subject would be great. Thanks so much for making these videos. Super helpful.
Jody, Need your opinion on soot. I have a Miller syncrowave 210. Miller spool mate 150. Ive not only cleaned ,cleaned, cleaned, I clean again. New aluminum, old aluminum. Just getting a ton of soot both sides full length of weld. Tried argon rates from 15 to over 35. Changed voltage and wire speed. I sealed the gun like you showed, tried the scotchbrite, nothing seems to change or help? Ive done some mig aluminum in the past and did not have near this much trouble even before I found out you had to clean it better. The last thing I can think of is the argon is bad? The welds actually look ok for a hack like me, they just look like I used coal to heat the metal. Any ideas?
I have that Hobart welder and the spool gun. I could not figure out why my welds were always so dirty. Maybe I should try your tricks next time I weld aluminum.
Thx Jodie . In the first 2 welds it sounds like short circuit or was it spray transfer? Also preheat is 250F or 250C? Learn a great deal,from your instructional videos. Thx again
Hi Jody can you do a video on vertical uphill aluminum mig? I've learned a lot from you with aluminum mig I'm fine going flat but uphill not so great running miller trailblazer 302g and 30a spool gun 95%of my work is in the field I have a aluminum tandem dump body I have to fix cab shield got wrecked it's 3/16" thanks keep the videos coming 👍
What alloy wire are you using? I have used 5356 3/64 through profax spool gun for years on tankers. At a different job they use 4043 on everything. That alloy does not weld as good or hold up as good. Any input on this... After the vacation. Thanks
A great welder I loved when I was doing aluminum mig was the fronius welder, we had power mig lincolns also but I perfered the double pulse weld of the fronius, so I would love to see a review on that welder if you ever got a chance
Burn-back can be very frustrating while using a spool gun. Very scientific approach to making the spool gun work as it should. One suggestion, though; make one change at a time and observe any results. That way, it easier to know what works. A question about stickout: does more stickout need more shielding gas flow? i.e. spray-arc vs. short circuit?
Thank you for your great video. I have a question on welding uphill on thick materials. I'll be welding some 3/8" alminuim 5053 grade. Would you recommend uphill weld on the 3/8" thick material, or was your suggestion on 1/2" and higher? I'll be welding a 48" diameter cylinder tank for a vacuum truck.
Hey Jody is there anyway you can make a video on Aluminum Mig vertical? Heat ,wire feed, and cfh gas and machine settings? Your videos are awesome and very educational! Keep up the awesome work!!!
Enjoy your Videos your opinions are not Biased and you say what's needed to be said good or bad , with that said have you ever used a Miller Syncrowave 210 and if so what's your pros and Cons on it
Thanks for the nuggets. First time I hear of checking for leaks on the spool gun. I'll try Teflon and scotch pad Tomorrow. Going to see if I can join 22 gauge diamond plate with spool gun🤔
I do quit a bit of aluminum mig with Lincoln Mag spool gun.... this gun is cheap... I have burnt one up already.. they are not repairable... besides that it works great. I found that regular tips do not work well... any tip that is tapered or has notch for tightening work best. I do go through lots of tips.. I can use tip cleaner and file to get tips back in shape if they just arch off on surface of tip... be sure to clean and blow out the gun often.
Literally just got done mig welding aluminum today in school.... Haha that shit timing. Had to figure this all out the hard way. Keep the videos coming, you're putting me through school!
Jody, I have a Hobart 210 mvp. I have watched your videos, yet read mixed reviews about the Hobart spoolrunner 100. Would the Lincoln spoolgun work/fit in my Hobart? It is supposed to be a more durable spool gun, so I would rather spend my money on it. Thanks for all the great videos!!!
Love all this Aluminium and Spool Gun info, thanks. Put a deposit on my first welder today, new machine from Boosweld here in Australia. No info out on it yet, I'm actually the first person to get one, so excited. I got the Spool Gun and a couple of helmets included, can't wait to start playing with it
You sound like me when I put in my order for my first everlast welder. It's been a few years now and I still love putting on my helmet and making sparks.
At 8:12, Jody uses an IR thermometer to measure the temperature of his base. The instrument he's using appears to be an inexpensive big-box example, not adjustable for varying surface emissivity. Using an IR thermometer on aluminum, unless the instrument can be adjusted for surface emissivity (those instruments > $400), you will NOT get the true temperature of the surface. Far from it, the indicated temps will be FAR lower than actual. Be careful!
I've never welded.. Was looking for suggestions on which model to buy and what type of welder (mig, tig, stick, combinations).. My lingo is incorrect I'm sure but man did I learn a lot watching this video and amazingly I understood everything. What a great video! Kudos to you working on vacation sir. Definitely subscribing.. Any suggestions for a beginner who picks up extremely fast and has a 220v ready to go? Wanted a stick/tig lift start initially (everlast) but am looking at the lincoln electric 180amp because of efficiency and the type of welds I will be engaging in. Around the house and innovation ideas, basically. Thanks! Again great video.
Hey Jody, love your videos on welding, very clear and straight to the point, im from Perth w.a, and our power is 240v, my welding unit is a UNI-MIG 190 Multifunction Inverter mig tig mma i have a SPG200II - Spool Gun - Heavy Duty, i put 0.8mm MIG Welding Wire in it, not Aluminium, for welding 2mm Square Tube, i put my voltage to 17v and my Wire speed to 5, anyway it welded good, but i got a white powder after my weld, can you please tell me what i did wrong,
Because with mig you use a consumable electrode. The DC reverse polarity gives a constant cleaning action and better penetration since your wire is melted into the weld pool. In tig, you do not use a consumable electrode, therefore you'll need AC which has some straight polarity for penetration and reverse polarity for cleaning the oxide.
Jared gave a good answer, but didn't touch on fact you can certainly TIG aluminum with DC - both with electrode negative, or electrode positive - though for very different applications. DC negative works great for thick stuff. In fact it's the ONLY way to make a 200-250 amp TIG machine worthwhile on big, thick sections of aluminum. The bummer is the workpiece must be cleaner than CLEAN CLEAN CLEAN, and the weld puddle just looks different than you're used to, mainly because theres a layer of slag floating on top of the molten metal. You have to learn how to stab the rod through the slag into the molten metal below. This is THE WAY to weld thick aluminum sections without a huge preheat. DC positive puts tons of heat into the electrode and balls it up like crazy, so thicker electrodes will hep. You get excellent cleaning effect, but very limited power to actually melt the workpiece. This is useful for thin stuff where you don't mind a really wide weld. I routinely use my little DC-only Miller Maxstar 200 both on negative and positive for various aluminum needs. While I wish I had the option of AC, the DC honestly serves me quite well. Hope that helps you.
Jody. im using a spool gun at work. getting alot of soot. im going to try the scotch brite fix. however what should the CFH flow be on a spool gun setup? On my tig im around 12 to 15... Thanks for your time brother.
Hi Jody, I was just wondering what type of torch movement you want to use for mig welding aluminum. Is it the same as steel... a circular or cursive “e” pattern?. Thanks for all you do to us help learn welding!
Jody Good to see the 350 push pull - just love mine - I use 3/64 wire and its a miller - would be nice for more people to use one although a bit expensive for the average home user.
Art Humphrey I've got the Lincoln 350MP with the push pull system, it's a great setup, a couple of years ago I had the chance of comparing the Miller and the Lincoln, to my appreciation the Lincoln has a slight advantage. Not welding as much now, about 98% of my work is machining... ;-)
I just want to thank you for your videos. I haven’t taken any courses for welding but have a lot of applications for the skill. Just watching your videos has helped me learn how to weld and saved me so much money. You are great at what you do and the way you have your videos set up is so informational. Keep it up!!
mad respect for a guy who takes time out of his vacation to put together a video for his channel, when he could have just waited until he came back! Nice to see you relaxed and relaxing, Sir! Hope you have an amazing vacation! Now go PLAY!!!!!
I come from the auto repair environment and troubleshooting is perhaps the most important thing that a mechanic must know how to do. Looking at the way you found the problem on the Hobart spool runner proves that you are the best! Thank you for sharing.
Thank you so much for this video, I only started mig welding mild steel about 3 months ago, and not very often, I've a project that needed ally welding and no one wanted to take it on. So in 2 hours this afternoon I went from soldering the wire to the electrode, to bird turd, to stacking dimes in about 2 hours. 4mm plate aluminium, your advice was just brilliant, literally, a thousand thank you's my man 🙏😎
There are many videos on welding but this is the best I have seen. You answer why to push- advancing the argon gas..... two thumbs up!
By far the best MIG welding aluminum video I've seen. Thanks for putting it together!
Thank you for this straight forward informative video!
Spent a year at welding school and we did not cover mig aluminum.
I bought my own spool and used the teachers personal to get a handle on it, he got me in the right direction but this really cleared up any confusion I had.
Thanks again!
This video right here got me my first aluminum job, and is keeping me employed by being able to do it. Incredible knowledge
Great video. Straight to the point and shows everything I came here to see. Been struggling with my Lincoln spool gun (exactly same setup as yours - 210MP and same spool gun), with sooting and really having a hard time keeping the bead without melting the aluminum away. This video helps immensely.
I have a Lincoln power mig 216 machine and got this M100 with it "free". And I love it !!!! I built an aluminum flat bed tow truck bed with it running .035 wire using an .040 tip. The .035 kept fouling up. Once I switched tips, it was flawless !
Welding Tips and No Fluff, always great content that's straight to the point.
I wish that everyone that was going to try to weld aluminum would watch this you are spot on nice job Sir
Ok , So I know this is old, but it's new to me. I'm starting to use the miller spoolmatic at work and I'm looking for all the info I can get on using it. Thanks for taking the time to make this video.
Hey Jody! Had to use the spoolgun here at work for the first time. Watching your video was really helpful, I got to the 'ballpark settings right away, and tweaked them using your examples. You probably cut the time I would have spent on that job in half. Thanks a bunch for your videos.
Good video, subscribed. So I have welded aluminum with 4043 an NEVER had soot issues. With 5356 I always do. Set up was the same: SS liner, tips, pure argon, and "blob-ball" welding ( where I turn down the wire feed while welding until wire forms a pea sized ball on the end, then dip it into place.
All I can deduce from this is that 5356 is just dirtier. Correct me if you know differently.
very grateful for these videos Jody, I've gone from knowing nothing to doing mig and stick welding repairs for my job. Very grateful, I thank God for this awesome fun skill and instructor like you!
I've been welding for years with the Lincoln spool gun I find a huge difference in wire I'd love to see you make a video using the Lincoln spool gun and the different manufacturers of wires and your recommendation be great videos as always thank you
I just did a weld test for a job. Not sure what the settings were but dang I had to weld fast. Guy said the welder was maxed out and I had to run a 2f and 3f on I think it was 7 gauge. I've never welded so fast in my life. I tried to do some manipulation like on steel for the 2f but it kept burning through so I stopped and did an extreme whip motion and it came out looking decent, the downhill 3f looked good though(never migged aluminum before, it was weird). Still got the job cause my 2f/3f mild steel weld was "really nice".
thanks for this video...it helped... I've been doing Collision for 26 yrs. I've had this aluminum spool gun from snap-on for the last year or so. I have the snap on mm250sl. I've had this for over 20yrs... finally got a argon bottle last week. I have the tig set up for it too. I will be trying it today on a home repair that is aluminum... again thanks for the insight on the trouble shooting....
great pointer w the teflon and scotch brite. i have the hobart 190 handler and this just fixed my headache w the uickness. thnx Jody.
Thank you, I've been a different tradie all my life, Bricklayer then licenced Builder here in Australia. A little late in life I spose for me to be learning, but through the years have taught myself a few tricks of the trade :)...Your video I have found is one of the most informative and understandable with regard to Aluminium. You have a good nouse to be able to solve problems with a bit of McGyverism thrown in, good quality work to boot.. I'll never get the years of experience behind me to become a good welder, just enough to be half reasonable is what I'm hoping for. I don't know if you have any on grinding and finishing welds but I'll look. Thanks again.
Watched so many spoolgun videos but finally got the right answers here.
Appreciate a lot , thank you very much.
Got myself a spoolgun for my everlast welder. Let the fun begin! I can't wait to start tackling aluminum.
Exactly why I'm here!
Jody, I have learned alot from watching, my wife actually watched this one with me and she was like OMG look at those eyes, so I think you have gained another utuber.
from kenya here. i must say that i like your job.
I just bought my first spool gun. What is the "go to" wire size and type, to buy for most aluminum jobs?
I use a Lincoln 350mp at work all day everyday. Great machine. Super reliable and a whole wack of settings to make things go smoother
I’m doing a project with 1/4” aluminum. It’s a big project with a lot of mass and I’ve been trying to TIG weld it with my 210A Miller machine, but it’s barely enough and it overheats constantly. I want to switch to a spool gun but I’m having trouble figuring out what type of spool gun I need for it. I’ve seen 135A, 150A, 200A, 250A options, etc but what do I actually need? I don’t want to spend too much but it needs to be enough for the job.
Your dedication to your channel is fantastic. I really want to get a spool gun for my everlast welder. You have some great tips.
Thanks for great videos as always! I have a Miller 252 and trying to decide if I want a spool gun or a Miller push/pull gun.
I bought the tig finger years ago because of you! Use it all the time! Love your videos, very informative and to the point. Thanks for your hard work!
What kind of wire do you use for aluminum welding? Is it the same wire type for use with a spool gun?
Can a larger welding equipment weld a aluminum 7075?
Hi Jody, could this setup be used to weld tubing, more specifically I want to build my own T-Top for my boat. Most folks have told me to TIG weld that, but I am not sure if I could pick that up as quickly. Any input on the subject would be great. Thanks so much for making these videos. Super helpful.
Awesome video! Just what I needed. What's the difference between 5365 and 4043?
Jody, Need your opinion on soot. I have a Miller syncrowave 210. Miller spool mate 150. Ive not only cleaned ,cleaned, cleaned, I clean again. New aluminum, old aluminum. Just getting a ton of soot both sides full length of weld. Tried argon rates from 15 to over 35. Changed voltage and wire speed. I sealed the gun like you showed, tried the scotchbrite, nothing seems to change or help? Ive done some mig aluminum in the past and did not have near this much trouble even before I found out you had to clean it better. The last thing I can think of is the argon is bad? The welds actually look ok for a hack like me, they just look like I used coal to heat the metal. Any ideas?
Wow.. what an awesome channel, great pro tips!. I don't know why the Hobart gas pattern made me laugh so hard !.
I have that Hobart welder and the spool gun. I could not figure out why my welds were always so dirty. Maybe I should try your tricks next time I weld aluminum.
Thx Jodie . In the first 2 welds it sounds like short circuit or was it spray transfer? Also preheat is 250F or 250C?
Learn a great deal,from your instructional videos. Thx again
Can this spool gun be good for thin tubing for turbo intercooler system piping?
Hi Jody can you do a video on vertical uphill aluminum mig? I've learned a lot from you with aluminum mig I'm fine going flat but uphill not so great running miller trailblazer 302g and 30a spool gun 95%of my work is in the field I have a aluminum tandem dump body I have to fix cab shield got wrecked it's 3/16" thanks keep the videos coming 👍
Just starting to learn how to mig weld aluminium (new to welding in general), this video was a huge help!
Great video... It was direct and to the point,, Just purchased a new 210 and gun,,, can't wait to start playing with it..
love your channel. just ordered a lincoln 210 mvp...am a rookie..you make it look so simple
The best welding videos on You Tube !!!!!!!!!!!!!!!!!
Is it possible to weld 2mm thick material with this gun?
I hope you checked out the lighthouse there, very cool.
Я не понимаю английский, но мне очень понравилось.Очень наглядно определение недостатков газовой защиты горелки.Толково.Спасибо!
The welds look a lot bigger than with TIG or regular MIG on steel. Is there a way to get the welds to look smaller and nicer with a spool gun?
When I start my classes Jody I'm going to try these techniques and see about progressing more I can't wait til I start school again. For this.
Do you use the same stick out with a pulse mig.
Is that 210 capable of doing 1/2”? I know Lincoln has it rated for like 3/16 or something I think I was reading
What alloy wire are you using? I have used 5356 3/64 through profax spool gun for years on tankers. At a different job they use 4043 on everything. That alloy does not weld as good or hold up as good. Any input on this... After the vacation. Thanks
What max thickness aluminum can be welded with 135 amp spool gun? Considering a Clarke 135SG
What temperature should cast aluminum wheels be while stretching out a dent?
I’m new to your work and channel. Great teaching. Thanks for sharing your craft and knowledge with us.
A great welder I loved when I was doing aluminum mig was the fronius welder, we had power mig lincolns also but I perfered the double pulse weld of the fronius, so I would love to see a review on that welder if you ever got a chance
Jody can u do a video on pulse mig on aluminum thanks
Awesome video as always. I was wondering if you planned on doing any future videos about stick welding with a bad fit up.
Burn-back can be very frustrating while using a spool gun.
Very scientific approach to making the spool gun work as it should. One suggestion, though; make one change at a time and observe any results. That way, it easier to know what works.
A question about stickout: does more stickout need more shielding gas flow? i.e. spray-arc vs. short circuit?
aluminum should have more of a stick out. use argon for shielding gas. check my videos have a few aluminum mig welds on there
Love your videos. I'm a newbie. Would you (or anyone) reco .35 or .30 wire on 3/16 thick aluminum ?
Do you need a spoil gun for mig welding alloy of can you use the Euro torch?
Thank you for your great video.
I have a question on welding uphill on thick materials. I'll be welding some 3/8" alminuim 5053 grade. Would you recommend uphill weld on the 3/8" thick material, or was your suggestion on 1/2" and higher?
I'll be welding a 48" diameter cylinder tank for a vacuum truck.
I would go uphill on that. If it’s round and you can roll it, then I would position it to where welding is from around 9 to 10 o’clock
@@weldingtipsandtricks thank you kindly.
I'm using XR aluma pro with Miller 350P.
Thanks for the video. I have recently purchased the Lincoln Power Mig 210MP and its a great machine.
Hey Jody is there anyway you can make a video on Aluminum Mig vertical? Heat ,wire feed, and cfh gas and machine settings? Your videos are awesome and very educational! Keep up the awesome work!!!
Any tips for better penetration? Pushing .035 wire 1/4" aluminum t joint...
Enjoy your Videos your opinions are not Biased and you say what's needed to be said good or bad , with that said have you ever used a Miller Syncrowave 210 and if so what's your pros and Cons on it
Vacation starts and the glasses come off. Another informative video, thank you Jody.
I've been following your videos for a couple of years. Thanks for the great info.
I need to weld an alumaweld boat but I don't know what type of aluminum it is. What should I use? 4043? Please help!
Thanks for the nuggets. First time I hear of checking for leaks on the spool gun. I'll try Teflon and scotch pad Tomorrow. Going to see if I can join 22 gauge diamond plate with spool gun🤔
What scotchbright pad are u useing when u do this. I just got a spoolgun and think i should try the scotchbright from the gate
I do quit a bit of aluminum mig with Lincoln Mag spool gun.... this gun is cheap... I have burnt one up already.. they are not repairable... besides that it works great. I found that regular tips do not work well... any tip that is tapered or has notch for tightening work best. I do go through lots of tips.. I can use tip cleaner and file to get tips back in shape if they just arch off on surface of tip... be sure to clean and blow out the gun often.
Literally just got done mig welding aluminum today in school.... Haha that shit timing. Had to figure this all out the hard way. Keep the videos coming, you're putting me through school!
Thank you for doing an outstanding job on this channel. It must be exhausting to maintain. Thank you
You're a good teacher. Thanks for your posts.
Jody, I have a Hobart 210 mvp. I have watched your videos, yet read mixed reviews about the Hobart spoolrunner 100. Would the Lincoln spoolgun work/fit in my Hobart? It is supposed to be a more durable spool gun, so I would rather spend my money on it. Thanks for all the great videos!!!
when putting scotch bright around the tip, would you need to increase the pre-flow any?
Can you give more info on wire type and argon cfh, that be much helpful
Love all this Aluminium and Spool Gun info, thanks. Put a deposit on my first welder today, new machine from Boosweld here in Australia. No info out on it yet, I'm actually the first person to get one, so excited. I got the Spool Gun and a couple of helmets included, can't wait to start playing with it
You sound like me when I put in my order for my first everlast welder. It's been a few years now and I still love putting on my helmet and making sparks.
SupaNautica to
I need some help , im welding 1/8 material with .30 wire and i just cant get to dial it in with the pulse
Great Video's Jody, tons of info., great in close camera work, crisp pace, and you're a seriously good welder!
Thank you very much for these tips! I've always wondered what causes the sooting when welding Aluminium with my MIG!
Can soot effect how strong or weak your weld will hold up
At 8:12, Jody uses an IR thermometer to measure the temperature of his base. The instrument he's using appears to be an inexpensive big-box example, not adjustable for varying surface emissivity.
Using an IR thermometer on aluminum, unless the instrument can be adjusted for surface emissivity (those instruments > $400), you will NOT get the true temperature of the surface. Far from it, the indicated temps will be FAR lower than actual. Be careful!
So does it matter if you push or pull using a spool gun for aluminum ?
where can i get this mig welding spool gun
I've never welded.. Was looking for suggestions on which model to buy and what type of welder (mig, tig, stick, combinations).. My lingo is incorrect I'm sure but man did I learn a lot watching this video and amazingly I understood everything. What a great video! Kudos to you working on vacation sir. Definitely subscribing.. Any suggestions for a beginner who picks up extremely fast and has a 220v ready to go? Wanted a stick/tig lift start initially (everlast) but am looking at the lincoln electric 180amp because of efficiency and the type of welds I will be engaging in. Around the house and innovation ideas, basically. Thanks! Again great video.
HI sir , why choosing spool gun? , just water cooled mig gun , and the alu rods into the welder
Good stuff mate --clear concise information,I reckon you have helped me.Thanks
Hey Jody, love your videos on welding, very clear and straight to the point, im from Perth w.a, and our power is 240v, my welding unit is a UNI-MIG 190 Multifunction Inverter mig tig mma i have a SPG200II - Spool Gun - Heavy Duty, i put 0.8mm MIG Welding Wire in it, not Aluminium, for welding 2mm Square Tube, i put my voltage to 17v and my Wire speed to 5, anyway it welded good, but i got a white powder after my weld, can you please tell me what i did wrong,
Why can you mig weld alu on dc, but you have to have an ac machine for tig aluminium?
Because with mig you use a consumable electrode. The DC reverse polarity gives a constant cleaning action and better penetration since your wire is melted into the weld pool. In tig, you do not use a consumable electrode, therefore you'll need AC which has some straight polarity for penetration and reverse polarity for cleaning the oxide.
Jared gave a good answer, but didn't touch on fact you can certainly TIG aluminum with DC - both with electrode negative, or electrode positive - though for very different applications. DC negative works great for thick stuff. In fact it's the ONLY way to make a 200-250 amp TIG machine worthwhile on big, thick sections of aluminum. The bummer is the workpiece must be cleaner than CLEAN CLEAN CLEAN, and the weld puddle just looks different than you're used to, mainly because theres a layer of slag floating on top of the molten metal. You have to learn how to stab the rod through the slag into the molten metal below. This is THE WAY to weld thick aluminum sections without a huge preheat. DC positive puts tons of heat into the electrode and balls it up like crazy, so thicker electrodes will hep. You get excellent cleaning effect, but very limited power to actually melt the workpiece. This is useful for thin stuff where you don't mind a really wide weld. I routinely use my little DC-only Miller Maxstar 200 both on negative and positive for various aluminum needs. While I wish I had the option of AC, the DC honestly serves me quite well. Hope that helps you.
Jody. im using a spool gun at work. getting alot of soot. im going to try the scotch brite fix. however what should the CFH flow be on a spool gun setup? On my tig im around 12 to 15... Thanks for your time brother.
Hi Jody,
I was just wondering what type of torch movement you want to use for mig welding aluminum. Is it the same as steel... a circular or cursive “e” pattern?. Thanks for all you do to us help learn welding!
Always love watching your videos, always a refreshing course!
this is why i love miller welders and will buy nothing but
Jody
Good to see the 350 push pull - just love mine - I use 3/64 wire and its a miller - would be nice for more people to use one although a bit expensive for the average home user.
Art Humphrey I've got the Lincoln 350MP with the push pull system, it's a great setup, a couple of years ago I had the chance of comparing the Miller and the Lincoln, to my appreciation the Lincoln has a slight advantage. Not welding as much now, about 98% of my work is machining... ;-)
Amazing video! Absolutely spot on with every aspect of mig aluminum with a spool gun.
Can you weld over head with a spool gun? I can’t find much on it.
can you make a video on aluminum 5xxx test plates