Hello Mr Woodro, I like you machine very much, there is however one point I am not sure about. As the girder under the rail is also the jaw of the vise, there must be some amount of deformation on the rail, which has a direct influence on the accuracy of the machine. Is the aluminium profile under the rail so stiff, that that deformation is neglectable? I just put in in calculator and I came on deflection of ca. 1mm on 2m girder with 90x180mm profile under the force of 200kg. That looks a lot. Thanks in advance for your answer. I am an mechanical engineer, so such a things are always interesting to me :-)
In addition, the movable vise jaw consists of two beams. Each beam has a section of 80x160 mm, and they are lined with wood 40 mm thick. As a result, the total width is 40+80+40+40+80+40=320 mm. As a result, the milling accuracy guaranteed by engineer Lee Hyun, is no less than 0.2mm.
@@yakov-woodworker Thanks for your response, I have actually no idea, what profile is there, the 90x180 is the biggest one the Rexroth offers... So I just roughly calculated with that one. Two beams you mentioned looks ok, that is why I didn't mentioned them. Their deflection is not so critical for the accuracy. If you're right and he has 160x160 profile under the rail, than there's still some 0,3mm deflection there under the force of 200kg. Maybe my estimation here is exaggerated. I can see in his videos, that he fixes things just very slightly in the vise.
![투톤좌탁 [둥근촉턱짜임] 거실에서 사용하기 좋은 좌식 테이블](http://i.ytimg.com/vi/kVqow4Rk9LI/mqdefault.jpg)
![투톤좌탁 [둥근촉턱짜임] 거실에서 사용하기 좋은 좌식 테이블](/img/tr.png)
![[목공 짜맞춤 기법 교육] 연귀맞춤 (암장부, 숫장부) 가공법](http://i.ytimg.com/vi/C1AqYZuzwrQ/mqdefault.jpg)
인간 과 기계의 장점을 최고로 사용할수 있는 머신 입니다. 아마 세계에 이런 머신은 처음 만드신것 같습니다. 한국분이 하셨다니 자랑스럽습니다. 한국에 가서 배우고 싶읍니다.
Hello from Moscow! Bravo: another brilliant demonstration of the Woodro machine!
Thank you for always leaving comments. be happy today
멋져요~ 한루 1~2개씩 매일 영상보네요^^ 감동입니다~
감사합니다. 열심히 하겠습니다!
Like1,....
영상 잘 봤습니다!! 또 오겠습니다!!
댓글 남겨주셔서 감사합니다 ^^
다음에 좋은 영상으로 찾아 뵙겠습니다
또 다른 훌륭한 직업...!!! 공유해주셔서 정말 감사합니다. 건배...!!!
영상 재미있게 보셨나요?
댓글 남겨주셔서 감사합니니다
@@woodroTV 네... 영상과 진행한 프로젝트가 정말 마음에 들어요...!!!
불행하게도, 나는 그들이 말할 때 이해하지 못합니다... 하지만 다행스럽게도 그들의 비디오에서는 거의 말하지 않습니다.
최고예요~^^😊
댓글 감사합니다
오늘 하루도 행복하세요
Stunning result!
Каждая серия ваших фильмов - радость для глаз! Отдых для души! Благодарю за удовольствие
thanks for watching
잘 봤습니다
댓글 남겨주셔서 고맙습니다
나이도 많으신분이 한달만에 저런걸 만드셨다니 역시 장비빨이네요
시청해 주셔서 감사합니다
저희 우드로이현은 기존의 고급 짜맞춤 가구나 소품등 을 제작하기 위해
기술을 습득하는 시간과 을 획기적으로 줄이고 가구를 만드는 노하우를 알려드려
남녀노소 누구나 쉽게 가구를 만들수 있습니다
멋진 작품이네요!!
기계가 못하는게 없군요
댓글 달아주셔서 감사합니다 ^^
Usta çok güzel olmuş
Bende bir mobilya cı olarak
Sizden ders almak istiyorum
thanks for the comment
I will work hard until the day we can meet someday :)
Hello Mr Woodro, I like you machine very much, there is however one point I am not sure about. As the girder under the rail is also the jaw of the vise, there must be some amount of deformation on the rail, which has a direct influence on the accuracy of the machine. Is the aluminium profile under the rail so stiff, that that deformation is neglectable? I just put in in calculator and I came on deflection of ca. 1mm on 2m girder with 90x180mm profile under the force of 200kg. That looks a lot. Thanks in advance for your answer. I am an mechanical engineer, so such a things are always interesting to me :-)
I dare to correct you: the vise beam profile is 80x160 mm, not 90x180mm.
And the beam under the rail has a profile of 160x160 mm.
In addition, the structural aluminum profile is lined with 40 mm thick wood.
In addition, the movable vise jaw consists of two beams. Each beam has a section of 80x160 mm, and they are lined with wood 40 mm thick. As a result, the total width is 40+80+40+40+80+40=320 mm. As a result, the milling accuracy guaranteed by engineer Lee Hyun, is no less than 0.2mm.
@@yakov-woodworker Thanks for your response, I have actually no idea, what profile is there, the 90x180 is the biggest one the Rexroth offers... So I just roughly calculated with that one. Two beams you mentioned looks ok, that is why I didn't mentioned them. Their deflection is not so critical for the accuracy. If you're right and he has 160x160 profile under the rail, than there's still some 0,3mm deflection there under the force of 200kg. Maybe my estimation here is exaggerated. I can see in his videos, that he fixes things just very slightly in the vise.
Привет из России! Отличная работа
thanks for watching :)
회사가전화연결이되질않습니다~
Can this machine be controlled entirely with CNC?
It is semi-automatic now, but we plan to develop a CNC model in the future. :)
thanks for watching
일본사람 가구 장인들을 유투브에서 비교해봐도 더 실용적이고 훌륭합니다. 혹시 이메일을 보내고 싶은데 연락처를 부탁합니다.
관심가져주셔서 감사합니다! woodroleehyun@gmail.com 입니다~
이현머신 구매하고 싶습니다, 전화번호를 알수있을까요?