Do I need to use that custom AM5 black bracket if I’m installing on a 9800X3D or can I use the existing bracket? I have a 5900X installed with this AIO currently.
@@CWWJR it’s a nightmare! I’ve installed 3 you can get lucky but mostly you have to use a lot of pressure and it’s tricky to thread each bolt. I’d say a beginner could do it but the chance of pressing to hard and breaking/damaging something is 30%
@@CWWJR unless you have a new 13th/14th gen intel I would suggest to buy a cheaper aio! Like a Thermalright frozen prism for $55 it’s more than enough to handle most amd and new amd CPUs and older intel. Most AIOS will have the same life and relatively same cooling, Then you can spend the extra money on upgrading other parts.
@@DreamBuildComputers nah the 10c difference between the ROG Ryujin III and a "budget AIO" is worth the extra $$ to me. Not to mention the fact that its a DEAD SILENT AIO. My buddy has been on 1st Gen one and LOVES it. I had had nothing but issues with "budget aios" never buying one again. I have been on the Arctic LF II for 5 years. Its finally gone out. Wanted a replacement just as good if not better. Wanted to get another Arctic and move to the LF III but if its a huge issue no thanks
@@CWWJRI hear people having this issue all the time. It took me 1 minute to install the pump onto the brackets. Takes a proper amount of force to push the pump into the CPU and just make sure to progressively tighten the screws so that they both bite into the thread. Otherwise its an awesome cooler. Dead silent and good cooling
@@AdaoComTiL very easy in the king 95 pro install the fan header onto the main aio pump first then place it on motherboard screw in aio then plug in to pump header on motherboard. Then install both aio and mobo in case at same time
@@Videos-lq9io waiting for my 9800x3d to arrive so I can install the contact frame, then try to install the aio and hopefully I connected the cables correctly on my x870e motherboarad (i think I connected FAN to CPU_FAN, PUMP to FAN4_PUMP and VRM to CPU_OPT then the A-RGB to the A-RGB 5V header)
Besides the Arctic Liquid Freezer III, what are the other components? I'm especially interested in the case. A good case really makes things easy. I read in the transcript that it is the Montech King 95 Pro. Do you have other recommendations for cases?
the Arctic III AIO is very tough to install if you have seen any of the other videos there is a lot of re-adjusting and the screws can be very tricky so to insure we didn’t create any dead spots we added more thermal paste! 😂
Halfway or so! Just get them locked into the threads about 3 or so threads and you’ll be good it should already be making contact before it’s tightened
I can confirm that this is the worse cooler to mount at the CPU spot. Thick tube and weird screws never align with the screws holes on their supports. I failed 20 times before being able to put it in place, I was scared to break my CPU. But the cooling is great and silent.
Omg please dont say that mine isnt properly seated? Because idle 7800x3d at 52c? Which is high imo?? Can you solve this? Or this is fine? Because r23 got only 17k :(
@@RoyZennet If screws are in place there is no way the cooler is not fitted correctly because they are very short, so it's not possible to secure them if they are in the wrong place. 52 is ok.
SUPER SICK build I like the black cooler lines!🔥🔥🔥
Thank you!
We plan on launching our 3rd giveaway soon!
When I screw it in, I heard some weird sound as if the screw go through the motherboard. I was so scared.
@@HeroVax it’s a tough sucker
thanks sir...watching your video & other content creator help me build my PC..especially using this montech case...
@@jomama6870 woooo!🔥
Do I need to use that custom AM5 black bracket if I’m installing on a 9800X3D or can I use the existing bracket? I have a 5900X installed with this AIO currently.
Forget to mention that obviously I’m changing motherboard too..
@@TheDBNpoison no the bracket is optional
What is your idle temp i just put a 7800x3d with a artic iii 360 and sitting around 47-50
@@acidunicorn1225 that’s perfect cinebench didn’t go over 60 c
@DreamBuildComputers Everyone says the LF 3 is a nightmare to install on Am5. Is this true? or Did you find it easy?
@@CWWJR it’s a nightmare! I’ve installed 3 you can get lucky but mostly you have to use a lot of pressure and it’s tricky to thread each bolt. I’d say a beginner could do it but the chance of pressing to hard and breaking/damaging something is 30%
@@DreamBuildComputers Thanks that covers that I will buy the ASUS ROG Ryujin III 360. Its suppose to be one of the best AIOs out there anyway
@@CWWJR unless you have a new 13th/14th gen intel I would suggest to buy a cheaper aio! Like a Thermalright frozen prism for $55 it’s more than enough to handle most amd and new amd CPUs and older intel. Most AIOS will have the same life and relatively same cooling, Then you can spend the extra money on upgrading other parts.
@@DreamBuildComputers nah the 10c difference between the ROG Ryujin III and a "budget AIO" is worth the extra $$ to me. Not to mention the fact that its a DEAD SILENT AIO. My buddy has been on 1st Gen one and LOVES it. I had had nothing but issues with "budget aios" never buying one again. I have been on the Arctic LF II for 5 years. Its finally gone out. Wanted a replacement just as good if not better. Wanted to get another Arctic and move to the LF III but if its a huge issue no thanks
@@CWWJRI hear people having this issue all the time. It took me 1 minute to install the pump onto the brackets. Takes a proper amount of force to push the pump into the CPU and just make sure to progressively tighten the screws so that they both bite into the thread. Otherwise its an awesome cooler. Dead silent and good cooling
What are the CPU temps?? On Idle and load
Wondering the same thing
Same mine seem a bit high sitting at 56c idle
How hard was to fit 8 pin CPU cable and fan/pump header?
@@AdaoComTiL very easy in the king 95 pro install the fan header onto the main aio pump first then place it on motherboard screw in aio then plug in to pump header on motherboard. Then install both aio and mobo in case at same time
What tool did you use to spread the thermal paste on CPU ? Can I spread it using a metal spoon ?
@@AbdullahYazbahar I would use a plastic utensil or just use your finger it won’t damage or contaminate the thermal paste
@@DreamBuildComputersfinger has oil which will make the performance worse
@@Videos-lq9io 0% correct sir
@@Videos-lq9io I just bought thermal right spatulas on amazon
@@Videos-lq9io waiting for my 9800x3d to arrive so I can install the contact frame, then try to install the aio and hopefully I connected the cables correctly on my x870e motherboarad (i think I connected FAN to CPU_FAN, PUMP to FAN4_PUMP and VRM to CPU_OPT then the A-RGB to the A-RGB 5V header)
what are the temps at idle and gaming?
Bro I paired 7800x3d with msi pro b650 m a wifi and arctic freezer ii 240 am I good ?
@@Soumyadip_10 perfect a 240 is plenty and Msi is the 🐐 when it comes to motherboards I think
@@DreamBuildComputersu mean Asrock 😅 but its fine msi 😮
This is so fire
@@kitwanasmart5844 thank you!
@@DreamBuildComputers looking to build mine right now will definitely use this for reference
how did you connect You AIO RADIATOR FANS you installed the pump but no the fans on top
They were preinstalled.
i am building a msi x670e 7900x 4070 asus pro art with that artic freezer hopefully i didn't buy wrong aio.... but this build is absolute fire
@@podstaxs thank you! And you should be fine! It comes with mounting options for lga and am5
How much is the full build?
Super beautiful build, but do you actually give the pcs out?
Yes you can see all our previous winners on our tik tok page or our website!
Besides the Arctic Liquid Freezer III, what are the other components? I'm especially interested in the case. A good case really makes things easy. I read in the transcript that it is the Montech King 95 Pro. Do you have other recommendations for cases?
The case is called Montech King 95
CPU: Ryzen 7 7800x3d
GPU: Gigabyte Vusion 3080 Ti
RAM: 64 gb Trident Z Neo 5 6000mhz
MOBO: Msi x670E Gaming Plus
PSU: Corsair 850rmx
CASE: MONTECH King 95 Pro
Ssd: Samsung 980 Pro
Damn boy, you have enough paste on that CPU to wall paper my house lol
the Arctic III AIO is very tough to install if you have seen any of the other videos there is a lot of re-adjusting and the screws can be very tricky so to insure we didn’t create any dead spots we added more thermal paste! 😂
Bruh, question, should you tighten the screws all the way until you cannot or just halfway or so
Halfway or so! Just get them locked into the threads about 3 or so threads and you’ll be good it should already be making contact before it’s tightened
Why not white? :(
Thanks
Would enjoy if you have the mic closer to your mout thb😊 Or maybe it’s just me…
@@xGamerGeek I’ll be more diligent my next build ! Thank you!
I can confirm that this is the worse cooler to mount at the CPU spot. Thick tube and weird screws never align with the screws holes on their supports. I failed 20 times before being able to put it in place, I was scared to break my CPU. But the cooling is great and silent.
@@psour33 haha I’m glad I’m not the only one 😪😂😂😂
Omg please dont say that mine isnt properly seated?
Because idle 7800x3d at 52c? Which is high imo??
Can you solve this? Or this is fine? Because r23 got only 17k :(
@@RoyZennet If screws are in place there is no way the cooler is not fitted correctly because they are very short, so it's not possible to secure them if they are in the wrong place. 52 is ok.
@@psour33 but :'( that hurts brooo
7800x3d use 30$ air cooler got 42-47c idle
Mine on that, same ambient at 26-28c
It’s not that hard took me 10 minutes ur just bad at it skill issue
Black AOI and motherboard in white case? 🤔🤮
@@BOKLUK_CHOVEK my buddy wanted to save $10 with the black one 😓
ALL BLACK OR ALL WHITE!!
@@Zampah__ srry dad
@DreamBuildComputers you are welcome mom
Are you try to killing me why Black aii 🤣
@@fishingwithlee9519 my buddy did the specs not me