I’ve had this bike since Christmas and the only issues I had was a new carburetor was a requirement, the exhaust broke off, and the wheels are trash. The tread on the rim of the tire was completely ripped and kept popping the tubes. But other than that it has good power, the front end pops up pretty easy without using the clutch, and the tires are bigger than a usual pit bike.i would definitely recommend getting this, just be prepared to spend around 40 bucks on a new carburator
love the videos on the dbx1 i have one and if you want more speed go with the 16'' rear wheel and 17 tooth sprockets you will get a smoother clutch up and high top speed i have a 17/35 sprocket set up and it get almost to 50 in 3rd
I just bought one of these and I hear something rubbing like either the chain or bearing? How do I tell which? I can't really hear it hear it pushing it only when riding
I would get a Tao but I’m kind of scared if it’s going to fall apart within like a week or so and also for the oil does it have to be a specific oil? For the tao
I just got one of these bad boys and it came with no instructions all though it was pretty eazy to install i have some wheel shaking issues on the back wheel im not sure whats going on pretty sure i have the spacers in the right spot you have any suggestions?
If you search up "Dirt Bike Hand Guards" on Ebay or Amazon you should be able to find some exactly the same or pretty similar for around $15-$25. Sorry we don't have an exact link.
Yea its a good bike for that. Do some cheap mods and get it to perform better once you ride it more. It seems pretty popular now. I always recommend ssr brands. They have always held up great but the dbx1 is a good buy too.
Gavin Mcvey I normally do, I actually just put a whole different carb and a bigger cam in one of mine. I do have a mini set of drill bits though if you ever wanted to go up one size at a time without waiting on them
@Jonathan Brea I sold it a while ago because I feel we got a lemon bike. Heard many others that the bike has been great! It's a good bike for a beginner and even your average experience rider. Has good power but just not out of the box. Do some cheap mods and you'll have nice bike. It has a 1 year engine warranty as well. We got a new engine sent to us when we had that issue we made a video on it. Hope that helps
I'm very abusive on my bikes, do you think this bike could handle it. For example dropping it a few times or pulling the wheelie to far back and falling.
Basically going in 2 or 3rd gear and revving the engine and letting the clutch out fast to pop the front end up instead of leaning back and power wheelieing. If that makes sense. The clutch was toast shortly after many of those clutch dumps were done.
If you don't want to stick a lot of mods and money into the bike then I would just get a name brand it's just want some in the bomb around on and have fun it's a great bike for that it's just not performance ready out of the box
there is actually a fair bit of info and videos out there about the yx140cc engines and other yx engines, ive noticed yx engines are on pretty much all the pit bikes- tao, apollo, thumpstar, ssr, pitster pro, list goes on. all the pit bike manufacturers just put their logo on the yx engines. i had a 2009 pitster pro lxr160, man that thing was sick but it was toast so i sold it last year, im looking at getting a tao dbx1 or a apollo rxf open or free ride
www.amazon.com/NIBBI-Performance-Motorcycle-Carburetor-KAWASAKI/dp/B07GC4B257/ref=sr_1_4?dchild=1&keywords=NIBBI+carb+26mm&qid=1590960876&sr=8-4#customerReviews That is the NIBBI carburetor for the Tao Tao DBX-1 I have one on mine. this is a video of my DBX-1 th-cam.com/video/siQGnCrVy5g/w-d-xo.html
It would handle trails very well I think! As for miles on a tank I don't have an exact answer it is very good on gas is all I can tell u. Fill it up and ride for hours!
Apollo rfz bikes are decent I've heard. I have an SSR 110 that's great and a thumpstar 125 if you haven't seen those. All have some issues but what bike doesn't ya know?
Tyson M im also trying to decide on a apollo rfz x18, another off brand bike, or just get a klx110L... have been doing alot of research and watching alot of videos and so far the rfz is winning my vote.
Gearing is pretty cheap it's just changing the sprocket on the front or the back you have to do some research to see what tooth sprocket you need to increase your top speed
I bought mine from amazon and the only things I have done to my dbx1 are a replica mikuni,eBay muffler and I hand tightened my shock and that’s about it and for the money it’s a very good dirt bike for beginners
@@bearkreekboys Stretch" is the wrong word to use.. because metal doesn't stretch But the pin holes that go through each link get worn out and elongate, and if you lay an old (abused) chain down flat you can see it will extend/compressed (aka 'stretch') quite a bit
Sounds 👍 performance, seems like ALL bikes, ebikes, dirt bikes and motorcycles from China have the Round Inner Tube 🎈 🎈 in them and to go Tubeless would be impossible.
Thanks 4 the heart loved comment I did, also when the tires on these products are Wider, That's where I get the 💡 of rubber round 🎈 🎈, might be a little wild but, Rubber Tree grows in the Orient, they make various rubber products in the factories a lot more than anywhere else.
Mine did before it got stolen did 70 and then I changed sprocket to 1 tooth down and it was so torque and it still did 58 to 60 i just think they have the choke on 😂 mine only would do 53 and would bog out at full throttle hey dummies the choke is backwards its all the way down off
James Orend yeah it would be I’m 5,2 and I just had to lower it a bit but it would be perfect for your higher and you can make it higher by tightening it a bit
I googled 5 best pit bikes,, tao tao both of them came up 1 st for came in last dir syxmoto as in sick moto came in last 125 I like it don't know why it came in last,, not much on youtube about it but always go up to a 17 tooth front sprocket dude hit 60 on the one here the tao tao 140cc only thing that swing arm second time I seen problems with it a she's number 1 on the list
Thanks for watching make sure to click the bell to be notified!!
Can i have the link to you nock off mikuni?
Ya same. Here
Is the bolt pattern the same as a honda
If you want a stiffer shock you can grab the spring and tighten it by hand
Great bike, perfect upgrades! Video tops 💯
Got the bike looking and sounding good I got the same one they are fun as hell brapp 💯👍
Heck ya!
I’ve had this bike since Christmas and the only issues I had was a new carburetor was a requirement, the exhaust broke off, and the wheels are trash. The tread on the rim of the tire was completely ripped and kept popping the tubes. But other than that it has good power, the front end pops up pretty easy without using the clutch, and the tires are bigger than a usual pit bike.i would definitely recommend getting this, just be prepared to spend around 40 bucks on a new carburator
Fax
So basically get aftermarket tires a carb and exhaust?
Yeah the bike is decent @BillNii
love the videos on the dbx1 i have one and if you want more speed go with the 16'' rear wheel and 17 tooth sprockets you will get a smoother clutch up and high top speed i have a 17/35 sprocket set up and it get almost to 50 in 3rd
Okay thanks for the tip! Appreciate the comment
MMO no problem bro here to help
David Robisheaux sure no problem this the exact link X-PRO 90/100-16 16" Rear Wheel... www.amazon.com/dp/B07TFZS4RZ?ref=ppx_pop_mob_ap_share
I just bought one of these and I hear something rubbing like either the chain or bearing? How do I tell which? I can't really hear it hear it pushing it only when riding
I have one it’s not getting spark. Brand new wire harness, tried disconnecting kill switch. Still no spark any recommends?
You'll have to verify AC output signal from stator and cdi. I don't have any in depth videos on this yet, will maybe make one
I'm about 5'6 is this a good size bike to start with?
It's a little tall for u out of the box might be able to adjust it lower but the guy in the video is 5'11
I would get a Tao but I’m kind of scared if it’s going to fall apart within like a week or so and also for the oil does it have to be a specific oil?
For the tao
I would use oil that is recommended for motorcycles with a wet clutch system
What type of cover you put on muffler. Send link if you can
Clutch part # ? Need new soon !? I have one also, special tool for clutch basket?
How you think the bike would ride with a bigger rear tire
Little more speed I'm sure. I think guys had put bigger ones on have to check online forums and stuff
How did you get the muffler slip on to fit. I got the same one and it is to small
I had to enlarge the hole with a grinding tool Ihave another video on this exhaust about making the diameter bigger
Where can I get brakes for my dirt bike from.
What size carb does it take and would a mikini wor
24 or 26 mm carburetor we use the knockoff mikuni
@@bearkreekboys so u think the real deal will fit bc it’s only a 100
What socket set yall get?
Where did you get the carburetor from?
Ebay
Where did u buy the clutch ? I have the same motor
Amazon I believe it's for a yx140 it's around 40$
eBay may also have it
What special socket do i need to change the clutch
Amazon it pit bike clutch socket!
Where do you find s clutch for these
Amazon I think or ebay
Just finished watching the video they seem like they are nice bikes
"you're pooched, bud" best part
I just got one of these bad boys and it came with no instructions all though it was pretty eazy to install i have some wheel shaking issues on the back wheel im not sure whats going on pretty sure i have the spacers in the right spot you have any suggestions?
Make sure spokes r intact and yea the axle is tight and the spacers.
Oky thanks for the reply will try it when I get home from work today 💜
whats the link of the handgrauds
Yikes it's been a while.ill see if I can find them
If you search up "Dirt Bike Hand Guards" on Ebay or Amazon you should be able to find some exactly the same or pretty similar for around $15-$25. Sorry we don't have an exact link.
Does this have the 17" with 14" in the rear?
Yes
Good budget bike for a begginer? Im 14 and looking into cheap begginer bikes. I wont run it too hard
Yea its a good bike for that. Do some cheap mods and get it to perform better once you ride it more. It seems pretty popular now. I always recommend ssr brands. They have always held up great but the dbx1 is a good buy too.
I bought the same pipe mine wont fit did you have to drill yours out?
I had a 38 mm which was too big the 28 mm you can try to drill out it's actually a 32 mm is the actual correct size
@@bearkreekboys i got a 28mm i seen another video where someone drilled out an fmf pipe to fit i guess ill try that thanks bro
So there decently reliable ? I’m 6”1 180 pounds will I fit?
Yup!
@@bearkreekboys I had a SSR189 Is this bike better? And why?
What carburetor do you recommend
Vm22mm or nibbi I think I have a link in some videos description on our Current videos!
@@bearkreekboys hell yeah thank you bro appreciate the info and reply 🙌🏽
What higher end carb should i get ?
Nibbi?
26mm ?
@@CR-ym2tx what carb do u have now?
Drill the main jet, and the rear suspension is adjustable. Gonna actually test mine on a track see how well it holds up
Gavin Mcvey I normally do, I actually just put a whole different carb and a bigger cam in one of mine. I do have a mini set of drill bits though if you ever wanted to go up one size at a time without waiting on them
How does it keep up on trails?
@@supercooldude824 it’s ok just a little small for me, just recently sold it. For the most part was and still is solid
Hey what size did you bought the new shock
Does the bike still run?
I sold this a few years ago it was running when I sold it
What is the price of that tao tao 140cc motorcycle?
900$ shipped I believe
Okay friend, keep uploading videos doing wheelies with the tao tao 140cc👍
@MMOwhat oil change do u reccomend for this bike
Any oil that is for wet clutch or Motorcycle specific
Synthetic oils i.use Valvoline or sportline motorcycle oil
Can you run tubeless?
how easy would it be to lower the seat height?
I never tried but u can adjust the suspension
@@bearkreekboys thanks!
What kind of pipes on there?
38mm slip on ebay
Can I switch my fairings and swing arm and forks to 125cc on my 110cc trying to get it up a little higher
I'm not sure on that
where and what clutch did you get
Amazon it's a yx 140 clutch 5 plate I think
How tall is he?
5 11
Where do you buy better carburetor? Any good carburetor will fit as long as same cc?
He's say "We" like it's his bike too lol. Did you go halfs on it or something?
Where u buy it
Superiorpowersports.com or there is a link to another website in the comments somewhere
Hey what's the size of the carb. The one I have has PZ27
26mm
@@bearkreekboys ok .. Thank... Does it make a difference or nuh... Sorry I'm still kinda of new to all these dirt bikes
@@2103tony is that an aftermarket carb?
@@bearkreekboys idk I think it's a stock..I bought off offer Up
How fast does it go
Like 60mph
Would this fit somone 5 foot 2?
It's a bit big for someone that size might want to get. 110 or 125cc
I’m about 5’0 and I was able to ride it but I had to lean on my right foot in order to stop
Would this be a good bike to cruise trails on
What gas it takes???
Premium 91 octane or 93
I live in Wisconsin and I'm getting an Apollo DB-X18 125cc.
Let me know how that bike is! Where in Wisconsin r u at?
@@bearkreekboys Sheboygan.
Damn we r really close to that
Where did you buy it
Superiorpowersports.com
I'm 5'4 is this a good bike for a beginner?
I'm not the creater but I think it would.
Do you think I would fit on it alright being around 6 foot, btw I’m only about 150lbs
Yes!
@Jonathan Brea yea we had a 200 pound rider on it and it rode good
@Jonathan Brea I sold it a while ago because I feel we got a lemon bike. Heard many others that the bike has been great! It's a good bike for a beginner and even your average experience rider. Has good power but just not out of the box. Do some cheap mods and you'll have nice bike. It has a 1 year engine warranty as well. We got a new engine sent to us when we had that issue we made a video on it. Hope that helps
@Jonathan Brea klx 140 or crf150r maybe or SSR pit bikes r good like a 140 SSR is nice.
Can you drop a comment with the link to the carb you got? Just got this bike and def in need of the carb in this video
yes i will try to get a link
www.ebay.com/itm/VM22-26mm-Carburetor-Air-Filter-Jet-For-Mikuni-110-125-140cc-Pit-Dirt-Bike-Pit/392935435722?_trkparms=ispr%3D1&hash=item5b7cc6edca:g:-nEAAOSwjFVfO4Ek&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkyMJZWL%252BqFSgQ3TOOe%252FNr7uIQ%252BykiGisAiO8ok217p1vPg9hwJDl%252FX%252Fcsbvl3B2WM3FsNe%252FAXB8jpU3%252BAVOsUFvQd63%252F1Swpp5LjDfzhM5QPWJZsSBkQVXnaEC%252F9OmfYr64bf97sT9iMZh8i85H4ESnT7%252FbtffLhTGCU2LAo5DyDgX7ldbIPmRxYdh7GXi%252BNTTrdvJlj2Ndk%252Btji7woZjTSexOHtQAe1cCMw8eSi8BezLXmKRNd3ZDK5nfNREAP5r%252FxnptQtXXriwNqxYSsVleIURq9jK%252BgV2J5pKTrUqRrHhNvxqucxIvaod%252B83b28u2tHzX91cgk8G2nj%252F2K%252FbGSavItuMmtq1t7x6YJN%252FdaJmb8JHQPOQ0Nihb6ayUgVjyxjZEGwBgZ%252B1jZHafxyeNDLto3MXltcodi5x9390SuKuT7BPWL3WTXhm7ULE0Rpw0m5TiaAJ%252FXKyggcCoFr3iNd1OSoasOy8iqe3quex3aOB%252F1UCL1Qi28326nYZIK1nYHowv%252FNhXxrWSkfZWPDtw2AOmcfQiRjKTVVkmeQ0sQjrtP3tWmDAUB7hAOg7K3bldC8BvXW45HPqOjC%252BeFXo9JXkCMFqOrGEJY9mxC2z%252F4jOJF51EA3Y0L1u%252B6H9Wa0aYnhqnHsn6SoYN0E7qdTrVAQwJzvZnbTB4OXvLfQM%252BNsND%252Fu0s8yrbKVtVtIIQfWeyqstv%252BCqFRrni3H440GOtlAMwUpMo%252Bxv5N4%252FkCFou2F5Ao0rTAfMd81a5LdUML8F%252FYrd6jGy%252BpkUhtfF7yxcRFSfILmOAnNsOZZRSY4id3xA%253D%7Ccksum%3A392935435722f2b71563785b4931a16591d468385342%7Campid%3APL_CLK%7Cclp%3A2334524
www.ebay.com/itm/VM22-26mm-Carburetor-For-Mikuni-110-125-140cc-212cc-196cc-GX200-Pit-Dirt-Bike-US/143685745632?_trkparms=ispr%3D1&hash=item2174567be0:g:TPIAAOSwcAFfOdcO&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickk7d4nremBkvNKtcC0ZwqXDHFf3bwj8DmxVP%252BWhIfGd3sZdmqxaAlBC2YdYpi%252FTTlBsN%252Bt7I4ClPlagb4Zsk61jXABz9od%252BkZ64DFJJVmT51BQ8dLBVUMwDlqkbSzIA1Ne37CgnK980rsvcvoUT3qM1ATtZ0lyCjx6TKduc5Ws7U4aHETE%252F8IVLR5ASpHrWYemR7bDW%252BlMHT3qm3hIOouwsYy9VPdznmrkmEtn0uMCXn4A%252Be%252Bie5wK0fkBIrVi63nuGXTB3HvX4uYlAfWNw3xUar2oelYyofR3f0ZejcEQfXbMdtszqJmI3OHEbZN6I%252BehRkqJFG4U9srAN4hpuoqLKq329W9AVzbBOMIoofxTowuLXaPK%252Bj%252BSTsbYom%252FaSkvzOmgb8OIbXQvL5GaoZoXT%252FxXEHl2P7dkIoelKxSKg45oIq24NO%252FTcdeTpca%252F85V6La0BaYF9MnXWG6hbODnh9WXkoUPoxvaIW04Ig6GnpkRmZvQonAnQj6SmYjz0x50%252FtEJxAHb%252F7rihWCf1LHuCy82BbJLvYpFuE108ymFUrBtrD1K3GW1leOEshn4VOjqPvHinXR5atFFOOtdET7QOfd8L%252BkD5EtnxpowosvN7Hb%252FvR4ixCL2MCd1iqE4q6OtSyy1jOe4GhWSSJIZKFfa9adNQSzPEvzpVmKmlcNJqph4srShwgkEitnxNFDd%252FBaqcHA8m7FDXixCPevSttRK8fZpxbeZT8QGrjd0M0Hz6gJ%252Fp%252BFBy%252BAgab41FbSOUfAmkECmWd1kcKEBmsWtd72wF22XOi29zq31eJhDvJq8%252BjEs4%253D%7Ccksum%3A143685745632f2b71563785b4931a16591d468385342%7Campid%3APL_CLK%7Cclp%3A2334524
one is with jets one without
Where do I get part for my tao 140
Dealer or tao motor.com
@@bearkreekboys is that for like big bore and performance?
Tboltbusa.com
@@bearkreekboys thank you
Bro plis que tipo de gasolina usa y aceite
podrías usar la gasolina más barata
I'm very abusive on my bikes, do you think this bike could handle it. For example dropping it a few times or pulling the wheelie to far back and falling.
It is okay for durability but the swing arm bushings r weak
I’m like 5ft 6 should I get it
It's a little big for you being 5 ft 6
Alrofht
Lol I’m 5ft 3 and I have this bike
If your not planning to fully build your engine a nibbi carb is a bad choice your better off just getting the knock of makuni and just jetting it
What size clutch did you buy?
It was on eBay or Amazon for a yx140 is the one u would need
Thanks for the info. Looking for a little 4 stroke and was considering this bike. See you guys are from WI, where from? Im in Kenosha, wi.
Sheboygan area
Please explain @ 7:25 clutch dump?? Thanks. Awesome review.
Basically going in 2 or 3rd gear and revving the engine and letting the clutch out fast to pop the front end up instead of leaning back and power wheelieing. If that makes sense. The clutch was toast shortly after many of those clutch dumps were done.
@@bearkreekboys Oh okay! I get it now. Thanks. For the reply! Keep up the good work. 💪🙏
@@bearkreekboys so if I just drive it normally without any wheelies it will be fine?
@@brycewatson3387 yes
So should I buy a tao dirt bike?
Are good bikes just realize if you are going to ride it hard it's not going to hold up to the name brand stuff
If you don't want to stick a lot of mods and money into the bike then I would just get a name brand it's just want some in the bomb around on and have fun it's a great bike for that it's just not performance ready out of the box
@@bearkreekboys Thanks for providing me with this info buddy 👍
No problem would love to see you subscribe to us and watch all of our videos too
@@bearkreekboys You replied and gave me some solid information. Thanks so much. *Subscribed* ➕✅
there is actually a fair bit of info and videos out there about the yx140cc engines and other yx engines, ive noticed yx engines are on pretty much all the pit bikes- tao, apollo, thumpstar, ssr, pitster pro, list goes on. all the pit bike manufacturers just put their logo on the yx engines. i had a 2009 pitster pro lxr160, man that thing was sick but it was toast so i sold it last year, im looking at getting a tao dbx1 or a apollo rxf open or free ride
Yeah our dbx1 is junk
The bike in the video is junk? Why what happened
In Canada they try to charge twice as much for these even with exchange.
@MMO can u pls leave me a link for a nibbi carb that will be good for the Taotao dbx1 don’t know which one to get?😂
www.amazon.com/NIBBI-Performance-Motorcycle-Carburetor-KAWASAKI/dp/B07GC4B257/ref=sr_1_4?dchild=1&keywords=NIBBI+carb+26mm&qid=1590960876&sr=8-4#customerReviews
That is the NIBBI carburetor for the Tao Tao DBX-1 I have one on mine.
this is a video of my DBX-1
th-cam.com/video/siQGnCrVy5g/w-d-xo.html
The rear shock looks like it's upside down
How do you think the dbx1 would do on riding some lite trails? How many miles do you think you can get with a full tank?
It would handle trails very well I think! As for miles on a tank I don't have an exact answer it is very good on gas is all I can tell u. Fill it up and ride for hours!
Just out of the box it's not a peppy bike at all...just gotta run non ethanol fuel too for those cheap carbs to keep them clean!
@@bearkreekboysis 87 octane from the gas station ok
can you drop a link where to purchased this bike from
I got it from superiorpowersports.com
Would it push 265 lbs???
I'm sure it would! We had a 200 pound rider no issues ride it
Hey is it the same size as the rm85 big wheel?
I'm not sure on that you may have to research it I'm guessing this is slightly bigger in ride height than the 85s
@@bearkreekboys ok thanks
@@bearkreekboys because I'm 5'8 and I'm trying to see if I would be able to ride this bike
Gotcha! It's a bit big for a 140cc u might be okay being 5'8"
@@bearkreekboys ok thanks for the tip!
Thanks for the video, I'm really debating whether to get the tao tao dbx1 or the Apollo x18 or x19
Is that Apollo a 140 or 125??
Apollo rfz bikes are decent I've heard. I have an SSR 110 that's great and a thumpstar 125 if you haven't seen those. All have some issues but what bike doesn't ya know?
@@bearkreekboys the x18 and x19 are 125cc
Rfz Apollo would be okay I think idk much about the x18 or x19
Tyson M im also trying to decide on a apollo rfz x18, another off brand bike, or just get a klx110L... have been doing alot of research and watching alot of videos and so far the rfz is winning my vote.
You never said if one should buy this bike or not.
Hy I'm 5,4 and 125lbs I bet I could probably get it 2 55 or 60 mph I hope so .
Change gearing and u can
@@bearkreekboys bet how much would that cost because I know nothing about mechanic's.
Gearing is pretty cheap it's just changing the sprocket on the front or the back you have to do some research to see what tooth sprocket you need to increase your top speed
I bought mine from amazon and the only things I have done to my dbx1 are a replica mikuni,eBay muffler and I hand tightened my shock and that’s about it and for the money it’s a very good dirt bike for beginners
Definitely!
Not just beginners! Lol I got me one for a pit bike at the Mx races.
Noxus what muffler did you upgrade to?
FadeEmTP I got a universal eBay muffler and it was too big so I wrapped it with exhaust wrap to get rid of the gap
@@freedomisntfree_44 How has the bike been now that its a year later? Held up okay?
Well I was thinking about buying that one until I seen this video
Do u happen to have the link to the slip on exhaust cover?
I can't get that yes
How long did the dbx1 last? Had mine about 4 months and it runs like a champ.
Motor had problems within 8 months
I have a parts diagram for it
The new ones are supposed to have a better carburetor
do you think I could ride this bike if im 5ft3? Also, what gas does this bike take thanks im kinda new
It's gonna be big for you seeing that u r 5 3
Premium 91 or 93 octane
Let the man talk sheesh he couldn't get a sentence out
Technically chains don't stretch
I disagree
@@bearkreekboys they wear and the play makes for slop and length
Yes stretching occurs like on a timing chain as well
@@bearkreekboys Stretch" is the wrong word to use.. because metal doesn't stretch
But the pin holes that go through each link get worn out and elongate, and if you lay an old (abused) chain down flat you can see it will extend/compressed (aka 'stretch') quite a bit
The seat hurts like a mf and I'm average size a buck70 5 foot 9
Sounds 👍 performance, seems like ALL bikes, ebikes, dirt bikes and motorcycles from China have the Round Inner Tube 🎈 🎈 in them and to go Tubeless would be impossible.
Thanks 4 the heart loved comment I did, also when the tires on these products are Wider, That's where I get the 💡 of rubber round 🎈 🎈, might be a little wild but, Rubber Tree grows in the Orient, they make various rubber products in the factories a lot more than anywhere else.
Mine did before it got stolen did 70 and then I changed sprocket to 1 tooth down and it was so torque and it still did 58 to 60 i just think they have the choke on 😂 mine only would do 53 and would bog out at full throttle hey dummies the choke is backwards its all the way down off
Lol
haha i was wondering if it would be good for someone 5ft10 didnt even have to ask thanks
James Orend yeah it would be I’m 5,2 and I just had to lower it a bit but it would be perfect for your higher and you can make it higher by tightening it a bit
@@urinesoakedtroglodyte5764 lol im 5'3" and im a children
I googled 5 best pit bikes,, tao tao both of them came up 1 st for came in last dir syxmoto as in sick moto came in last 125 I like it don't know why it came in last,, not much on youtube about it but always go up to a 17 tooth front sprocket dude hit 60 on the one here the tao tao 140cc only thing that swing arm second time I seen problems with it a she's number 1 on the list
If you have to switch it right away it's garbage it just looks good
Minty taotao
Hey man, do you think pitbikepowersports.com is a legit site? I ordered the apollo off there 4 days ago
Not sure I have never used that site
So, what was your opinion now of that seller ? What bike did you get and how is it ??
@@jamesconner3437 the bike ended up coming. 10 months later* the bike runs good haven’t had any problems with it
@@raikz4359 damn dude that’s a long wait that’s one of the reasons i’m getting it at the dealership instead i don’t feel like waiting that long
Taken er for a little Monica Le-ripski eh bud
I got this bike and the carburetor cought on fire so I would not buy it that’s just my opinion
How does a carb catch fire?
Can I get this bike for free
Better off staying with that knock off I heard the other one you have jetting problems $85 bucks
U guys are definitely Canadian
Lol no
MMO really damn
Ole dude talk sooo much i forgot who bike it is
Here are some schematics not all but some! partskit.com/product/search/model/schematic/A006249?vm=DBX1&vn=Dirt%20Bikes&vc=0588
recorded on iphone 60
Old Honda engine clones!
Should run forever!
It's like watching 2 perrot talking. One is saying something and the other repeat it .
Thus is true