Making electric Roller Bender Part part 3/3
ฝัง
- เผยแพร่เมื่อ 4 เม.ย. 2019
- If you didn't see how I built this machine, you can do it here: • Electric roller bender...
After doing this test I deduced a couple of conclusions which can be helpful for you.
9RPM It's definitely too slow. I suppose 15 or 20RPM would be a better solution. If I find time someday, I'll change pulley's. It causes that bender will bend a material faster than now.
Wheels which hold material have to be tempered. I thought this process pass me by but I was wrong.
I'm going to give all axes to temper. It won't damage them moreover It'll give them a positive effect.
Advantages of this project:
A cylinder and a hydraulic pump: I'm content with this system and I suppose It's much better solution than a screw and nut.
Replacement of bearings in the middle part was accurate. A roller is much stiff than before.
A switch R-0-L holding in the hand turned out to be better option than mounted directly to the bender.
As you have seen, the largest material I bend is 30x30x2mm. Behind the camera I tried 30x30x3 and it worked, although it took a bit longer. I think that the 40x40x2mm profile is the maximum size that this machine can bear.
Some tools I used in this construction:
Self made:
Belt grinder 2x48 - • DIY Belt Grinder 2x48"...
Vise - • Super Strong Hydraulic...
Drill press STAND with COOLANT SYSTEM - • Drill press STAND with...
and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Mag drill Evolution EVO MAG 28
Band saw Stiler BS 712R
Drill press ZX7016
--------------------------------------------------------------------------
Videos that you may like:
• Making MOTORIZED Plasm... - MOTORIZED Plasma Cutting Track
• Making simple Power Fi... - Simple Power File DIY
• Chain Saw HACK 7 - Dri... - Chain Saw HACK 7 - Drill Attachment
• How to make KEYWAY on ... - KEYWAY on the LATHE
--------------------------------------------------------------------------
Social media:
FB: Made in Poland
Insta: made_inpoland
--------------------------------------------------------------------------
Music by TH-cam library :
Nightingale
Love Now
--------------------------------------------------------------------------
Very good project my friend. You are the "make it extrem" by Poland 👍👍👍👍
Zamiast tego niewygodnego przełącznika obrotowego, mogłeś zastosować sterowanie przyciskami, które załączałyby odpowiednie styczniki.
Mógłbyś wtedy wygodnie operować jedną ręką pracą silnika i jego kierunkiem obrotów - gdy wciskasz przycisk silnik pracuje, puszczasz przycisk momentalnie się zatrzymuje, no i osobne przyciski do obrotów lewo - prawo.
Wygodniejsze, szybsze i bezpieczniejsze sterowanie giętarką, a druga ręką obsługiwałbyś pompę, lub trzymał walcowany materiał.
To jedyna uwaga, cała reszt jest po prostu piękna. Dobra robota!
Excellent craftsmanship, probably the nicest "homemade" roller I've seen.
Watched the whole build-Bravo. Was SO looking forward to seeing how well it worked! Thank you! What a great machine.
That's a beautiful piece of homemade machinery! WOW!
The cover panels and the contrasting paint work really set this project up a notch. It almost looks like a bought unit, but we know better.
Congratulations on an incredible ring roller. Beautiful engineering and design. Bending that flat stock SIDEWAYS blew me away!!!!!
This really is next level. I'm glad I subscribed!
Respect from Australia!
Nice one bro
It is Heavy duty bender.
Thumbs up..
I watched almost all your videos one after another. I like what you do. You deliver the ideas and the working process without a word. Very impressive and well done.
Such an amazingly high quality build. Excellent.
Wow very impressive absolutely brilliant build. Its looks professional. Love the colour choice. Big Hi from the UK.
Your work is outstanding ! The machines you build are of extremely high quality and engineering ! Very impressive.
Tak, właśnie takie jutuby lubię oglądać, szacun. Dobra robota 👍
you have one of the most useful channels on youtube for metal work good work .
That was nice bro. Was waiting for the results :D
Thanks man! :D
That flat bar was impressive:-)
Wow! Bits of brain pieces scattered all over from being blown away! That is so kickass!
Now some curved projects coming.
Cheers
You had me at bending a flat bar width ways
impressive!
Man that is cool! I want one! =) Nice job!
Perfect work! Regards from Germany.
Great build! Couldn't be any better. 👍
I love your build videos, they are so innovative!!
Even the colour scheme is blowing me away! :)
when making keyways, the 'best way' is using what you have. Nice build.
Darek ,czapki z głów , fantastyczna robota na najwyższym poziomie jak zawsze , Pozdro
ty to jesteś majster podziwiam talent więcej takich filmów szacun
Nice design! Well done!
Beautiful watching your work evolve ...
good work, congratulations
from México
te clavas viendo como lo hace¡
Works really well, but so it should with the level of thought and engineering gone into it. Well done! :)
Zajefajne masz projekty i super wykonanie. Dobra robota 👍👍👍
From INDIA........
for making this, you need experience and patient which you have. Great work....👍👍👍👌👌
Anybody that's not impressed with this build is insane! Outstanding, need to build one for myself!
You never fail to impress!!!
Me gustan un montón tus proyectos! Un trabajo excelente!
Looks amazing - great capability. Almost a bit too good for TH-cam - great job thanks for sharing!
Great work. Multi Talented! Congratulations.
It's always so cool watch your videos,professional finish and great ideas,👍🏻
You did a wonderful job on this! Great work :)
Who the hell thumbs down this video? Maybe people with no appreciation of the work or time it takes not only to build stuff like this but also the time and effort to video and edit just to share it with others.
Good looking machine. Add a scale to the center roller for repeatability
Супер!! Золотые руки! Чувак, молодец;)
Excellent job. It is a beautiful machine, a work of art, really.
Fajny projekt. Trzymaj tak dalej!
Great work mate! Cheers from New Zealand 🤙
Excelente trabalho parabéns
Nothing is impossible for you. Great job! 👍👍👍👍
awsome like always II zajebiste!
I can't wait to see what you can do with Rolled steel sections.
Brilliant ideas, and excellent work..
Amazing craftsmanship !
Awesome job very creative you do such professional work and great videos
Very impressive. Nicely done.
WowThat machine is very nice. Super nice work.
It's amazing!!! 👍🏻✌🏻⛰🦅
As always.
Superb.
Macchina molto funzionale, complimenti!!!!!!👍👍👍👍👍👍
Well done sir!
Nice job, pretty cool to see the build👍
Man. U r brilliant. Beautifully done
Bravo!!! That was amazing!!!bardzo imponujące!!!
Very good job. Nice done.
Świetna robota!
Niedługo ukradnę pomysł;)
Great Job on the Bender :)
That tube roller turned out great.
You’re very talented! 👍👍
like a factory machine bravo well structure build keep the good work. Thanks for the ideas
Excellent concept,skill,work
If those bottom rollers we're just a little closer, you wouldn't have the waste on the ends. But I know they are there and can't move so just have to go with it. Other than that, nice job. Only other thing I can see, is there's something green on the counter in the back ground.
G’Day Mate
Great job you just earned a sub
Projeto fantástico muito bom gostei, amei máquina
Nice job man !!! 👌
Bravo! Very nice build.
Amazing work
Muy buen trabajo amigo y lo felicito por su nueva herramienta y muy util saludos
Nice job i really enjoyed this thank you.
Top brother, like Brazil!!
this is truly beautiful
Very nice, good job you are a true craftsman.
it is wonderful, well done you are really a craftsman
Cool work 👍
Works really well. Will you make form tools for round tube.
간단하면서 최고입니다 오늘 저도 따라해 보겠습니다. 감사합니다.
Widząc filmy na twoim kanale, jestem dumny że jestem polakiem :) Pomysły super,zawsze łapa w góre leci, miło sie ogląda, oby tak dalej. Pozdro
That's a beast of a machine.
Конструкция четкая,выносной пульт,гидравлика,электропривод.Но расстояние между валами большевата(считай каждый прогон выкидывать сантимов 50).
А опцией можно было на центральном валу сделать шкалу мерную(упрощает при прогоне большого количества однообразного материала).
Прибыльная штука😉😉😉👍
Veoma poucno.nabavio sam strug i glodalicu pa cu sada da uzivam u majstorijama.
Just awesome!
That was brilliant.
Ficou top parabéns 👏👏👏👏👏
A thing of beauty!
I am from indonesia..... thank you very much... your video make me know how to roll it
Que show parabéns amigo.
totally ass kicking !! you the man bro !!!
Very good job i watching all parts 👍
It's veryyyyyyy veryyyyyyy nice bander u av made. I wish u could av tried to reduce the distance between the main roller and side rollers still its perfect keep it up man. Will give 99.9% marks 👍
You are the MAN!!! 👍👍👍
Great work
Great work! Cheers!
EXCELLENT!!!