Good Day Sir Where Can I Buy The LCD Screen And Digitizer Full Assembly with Frame For Ulefone Power Armor 13 And The Back Part Of The Phone Just Like In Your Video
Joguei meu armor 24 contra a parede e ele soltou a tela e partiu o cabo que segura ela no telemóvel, pra troca ela e so soltar o parafuso que fica em cima do cabo e encaixe o novo ne com a tela ? Achei um kit de reparação e com a tela e queria comprar ele...
hello, unfortunately I don't have a video for this model, but I can tell you that the front panel has to be removed, so you need to tap it slowly with a razor blade or something thin around the frame and the display (it will be glued there) and be careful of the flex from the display so you don't tear it off the system board (connector) so that it doesn't get damaged :-)
Thank you very much 🙂 spare-parts-mobile.com/cs/ulefone-replacement-parts-cs/LCD-Screen-and-Digitizer-Full-Assembly-with-Frame-for-Ulefone-Power-Armor-13-Black-CS
hello, it's not difficult, just take out the battery where the flex from the LCD is and charge the front panel with hot air and then carefully with a razor blade between the frame and the front panel, you can stick it with double-sided tape, for example, but I wouldn't recommend submerging it in water and it's possible that it will get there dust, but if you want it to be even better, tape and glue b-7000
@@josephwilliamngamba3319because my phone was my camera and recording device, I had no other device to record how I did it. Sure there is trepidation to a project like this, but if you take your time and remove things putting them in a orderly fashion so you know how to put it back together, you'll be fine. Patience...and don't drink any coffee before you do this project. 😂
Cai na besteira de testar a resistência do meu ulefone 13 na piscina e queimou a tela, já levei em uma assistência técnica e já trocou o LCD, agora está funcionando tudo ok, minha dúvida é, ele realmente tem essa resistência contra água? Trabalho de moto com ele e sempre uso capinha de chuva pra não molhar, pois tenho medo que volte a queimar a tela caso molhe
oi, eu sempre trabalho se o telefone for à prova d'água, então nunca confie nele, principalmente na água da piscina (cloro) ou do mar (água salgada) Faço reparos há cerca de 7 anos e vi inúmeros telefones que deveriam ter proteção IP que estavam superaquecidos, tomaria cuidado com isso :-)
if I have a black screen , but can see the backlight. Does this mean the screen needs to be replaced ? I do not want to buy screen if this may not be solution. But if you have seen that issue before and know that a new screen will fix problem, then i will buy a new one. * I never dropped the phone and never got wet. [ power armor 13 ]
hello, I would first try to flash the SW on the device, if that doesn't help send the backlight on the front panel and then it really needs to be replaced, if your phone is under warranty, the service should solve it :-)
@@mk.service-phone Thank you !!!! =) I will try to flash SW ( software ) first. This phone works great for my job delivering pharmaceuticals (medicine) for all of US states South Carolina and Georgia. But now not working. I will update here when I fix it.
may unit has got black screen, but the touching system is still works, for example i gonna turn of the alarm clock and some times I turn of the main phone, the cause of this is it was sink in the pool, but it still works but lately the screnen got flickering and now its black off, what should I Do? hope you notice my comment
hello, if the phone was wet, it could be liquid ingress (yes, it has some IP protection), but that doesn't mean that water couldn't get in there, even if the phone has already experienced several big falls... The IP performance could have been impaired, I recommend finding a service where I wonder about that..
My screen has failed, can you access internal memorary when the phone has been opened up? As you need to click on screen to allow file transfer to pc, and screen not working so cant do that, wondering if theres another way to retrieve data off my phone
you need to do one for the people that purchased from AMAZON... just the screen that pops off the front.... not the whole unit replacement. I just did it and most of your video was good until it came to the magic screen unit that i didnt have in front of me... all you need to do is pop the old screen off from behind (it may brake some) and then silicone it in while threading the flat wire through the notch and re assembling.
hi, i am using ULEFONE armor 13, when i wear a headset instead of a headset, it does not detect the headset sometimes, what is the reason? can you help me?
YOU skipped a step, when you are putting the top piece back in you need to show us that you disconnected the orange connection and installed it before putting the casing back on in order to connect it in the top instead of the impossible bottom....fyi
Good Day Sir Where Can I Buy The LCD Screen And Digitizer Full Assembly with Frame For Ulefone Power Armor 13 And The Back Part Of The Phone Just Like In Your Video
Do U need to replace the whole screen ? Not possible to dry it out?
Joguei meu armor 24 contra a parede e ele soltou a tela e partiu o cabo que segura ela no telemóvel, pra troca ela e so soltar o parafuso que fica em cima do cabo e encaixe o novo ne com a tela ? Achei um kit de reparação e com a tela e queria comprar ele...
Great Job boss!!
Thank you ❤️
Where can I find the display already installed on that piece of the frame? I can find just the screen with the glass.. thank you very much!
spare-parts-mobile.com/cs/LCD-Screen-and-Digitizer-Full-Assembly-with-Frame-for-Ulefone-Power-Armor-13-Black-CS
Where your shop?
Hello, we don't have a store, we can't sell spare parts.
Do you have a video on to replace the screen on a ulefone armor x13?? This mine only has two screws by the volume button and that's it
hello, unfortunately I don't have a video for this model, but I can tell you that the front panel has to be removed, so you need to tap it slowly with a razor blade or something thin around the frame and the display (it will be glued there) and be careful of the flex from the display so you don't tear it off the system board (connector) so that it doesn't get damaged :-)
Hello. Excellent video. Where can I buy the new LCD online?
Thank you very much 🙂
spare-parts-mobile.com/cs/ulefone-replacement-parts-cs/LCD-Screen-and-Digitizer-Full-Assembly-with-Frame-for-Ulefone-Power-Armor-13-Black-CS
Good morning
I broke the small black wire that passes on the right, is it serious? what is it for thank you
The microphone...
I just purchased a new "screen only" is it hard to take the old screen off the frame? Thank you in advance 👍🏻
hello, it's not difficult, just take out the battery where the flex from the LCD is and charge the front panel with hot air and then carefully with a razor blade between the frame and the front panel, you can stick it with double-sided tape, for example, but I wouldn't recommend submerging it in water and it's possible that it will get there dust, but if you want it to be even better, tape and glue b-7000
Thank you, will give that a try 👍🏻 God Bless
So disappointed! Why you didn't show how you remove the display and replace it!?
@@josephwilliamngamba3319because my phone was my camera and recording device, I had no other device to record how I did it. Sure there is trepidation to a project like this, but if you take your time and remove things putting them in a orderly fashion so you know how to put it back together, you'll be fine. Patience...and don't drink any coffee before you do this project. 😂
Cai na besteira de testar a resistência do meu ulefone 13 na piscina e queimou a tela, já levei em uma assistência técnica e já trocou o LCD, agora está funcionando tudo ok, minha dúvida é, ele realmente tem essa resistência contra água? Trabalho de moto com ele e sempre uso capinha de chuva pra não molhar, pois tenho medo que volte a queimar a tela caso molhe
oi, eu sempre trabalho se o telefone for à prova d'água, então nunca confie nele, principalmente na água da piscina (cloro) ou do mar (água salgada)
Faço reparos há cerca de 7 anos e vi inúmeros telefones que deveriam ter proteção IP que estavam superaquecidos, tomaria cuidado com isso :-)
How you open old lcd screen. Video just show new lcd already placed at housing.
Hello, the LCD is glued in the frame, only used with the frame due to water resistance :-)
if I have a black screen , but can see the backlight. Does this mean the screen needs to be replaced ? I do not want to buy screen if this may not be solution. But if you have seen that issue before and know that a new screen will fix problem, then i will buy a new one.
* I never dropped the phone and never got wet. [ power armor 13 ]
hello, I would first try to flash the SW on the device, if that doesn't help send the backlight on the front panel and then it really needs to be replaced, if your phone is under warranty, the service should solve it :-)
@@mk.service-phone Thank you !!!! =) I will try to flash SW ( software ) first. This phone works great for my job delivering pharmaceuticals (medicine) for all of US states South Carolina and Georgia. But now not working. I will update here when I fix it.
may unit has got black screen, but the touching system is still works, for example i gonna turn of the alarm clock and some times I turn of the main phone,
the cause of this is it was sink in the pool, but it still works but lately the screnen got flickering and now its black off,
what should I Do? hope you notice my comment
hello, if the phone was wet, it could be liquid ingress (yes, it has some IP protection), but that doesn't mean that water couldn't get in there, even if the phone has already experienced several big falls... The IP performance could have been impaired, I recommend finding a service where I wonder about that..
Nice
My screen has failed, can you access internal memorary when the phone has been opened up? As you need to click on screen to allow file transfer to pc, and screen not working so cant do that, wondering if theres another way to retrieve data off my phone
yeah I have the same problem, I have some data I only have on the phone, and I want to get it back but can't because of the broken screen
hi, the only option is to replace it with a new lcd panel
dzięki tobie uruchomiłem swój telefon 🎉🎉🎉🎉🎉
dziękuję mockracie
😊😊😊
🎉🎉🎉🎉
you need to do one for the people that purchased from AMAZON... just the screen that pops off the front.... not the whole unit replacement. I just did it and most of your video was good until it came to the magic screen unit that i didnt have in front of me... all you need to do is pop the old screen off from behind (it may brake some) and then silicone it in while threading the flat wire through the notch and re assembling.
hi, i am using ULEFONE armor 13, when i wear a headset instead of a headset, it does not detect the headset sometimes, what is the reason? can you help me?
Hello, I would first try to clean the connector and then it needs to be replaced :-)
Pls make a video on armor 13 microphone replacement. Thanks
Hello microphone is new lcd..
How much po
new lcd is approx $120 US......Brand new(what they say) on amazon is $299 US
Bacana. O meu parou de funcionar, liga mas não consegui iniciar. Você teria ideia do que pode ser?
Sim, eu tentaria carregar o SW mais recente, se isso não ajudar, a necessidade de um novo painel frontal
Good evening sir please I have ulphone armor 13 is the screen don't open can you fix it I pay you I'm living in Finland please reply
YOU skipped a step, when you are putting the top piece back in you need to show us that you disconnected the orange connection and installed it before putting the casing back on in order to connect it in the top instead of the impossible bottom....fyi
kl
Nice