Thank you for making me aware of this!! I have a collective and two of the devices have sense ports. I will not have the optical level sensors on the same device with temp sensors.
The internal magnets on both of my XF230s ruptured after 16 months of use and 6 months of storage, Coralvue offered a quote for repair that was almost what I paid for the pumps originally, I swore off Coralvue from henceforward.
I've had two hydros optical sensors that got waterlogged. Better put silicone on the wire entrance into the device. One took me forever to figure it out.
Nice to see you on here again , and thank you for the things you do .shame about the brush off .
Thank you for making me aware of this!! I have a collective and two of the devices have sense ports. I will not have the optical level sensors on the same device with temp sensors.
Coralvue should inform their customers of this situation.
The internal magnets on both of my XF230s ruptured after 16 months of use and 6 months of storage, Coralvue offered a quote for repair that was almost what I paid for the pumps originally, I swore off Coralvue from henceforward.
I've started building a few types of switches that can operate the 0-10 volt inputs. Temperature high or low switch, and level high or low sensor.
Shelly Dimmer Plus 0-10V is pretty nice
I've had two hydros optical sensors that got waterlogged. Better put silicone on the wire entrance into the device. One took me forever to figure it out.
@@wmars4655 Alternatively, we could expect better devices from our vendors. Those level sensors are cheap.
is your assured, rested?
@@barryrichards5015 My opinion has been confirmed, assuredly. I’ll rest appropriately.