Mr-fix, you're a life saver. This and other videos of yours helped me unlock my mid2 with 8inch touch screen. I appreciate all your help and to support, I ordered an shirt.
Thanks - great video, for any others out there I was able to enable Developer Mode using Carista Evo. Always a little nerve wracking doing these sort of updates so seeing ti work for real really helps. Mine was 2018 Skoda Octavia Amundsen system.
You can additionally install extended green menu GEM. Just keep the same SD card in the slot and select dedicated option in GEM. You will be surprised how much extra configuration options is added in.
Could somebody please give me some advise/help? I have the mst2_eu_vw_zr_P0137T installed, but want to be able to install Toolbox so that I can use a map on a custom SD card. I tried to install Toolbox without firmware update with the solution to replace the cpu folder from GEM folder with the one in the root of the SD card so that the root CPU folder is replaced with the GEM folder version. After 10 attempts it keeps saying: start electric test. Mainunit/version compare. Accept this error code leads to restart(translated from Dutch). What should I do to make it work? I hope it will be possible.
Hi there, What else is needed to activate app-connect beside patching the unit with the toolbox. You mentioned one procedure, can you pls describe the steps
Thanks for this great tutorial 🙂 The Skoda Amundsen MIB2 Head unit with part number 5Q0035874 comes in 3 different versions; A, B and C. Do you know if the toolbox software can be installed on all versions? There is a software and hardware version printed on top of them next to part number. Is this the same software referred to as in the installation instructions? Thanks 😊
What you did is really great, thank you for your efforts. My car is a 2015 Jetta. It is made by Technisat and has the version MST_EU-VW_PQ_P0240T. Inspired by another video, I upgraded the version to 253T to see if a feature was added. I activated the green menu with vcds and loaded the mib2 toolbox to the sd card. It recognizes the sd, shows the software version, I click on it and it opens, but the start box at the top is not active. Where am I making a mistake, is it not accepting the 253 version? I wanted to go back to 245, but it won't accept that either. Thank you very much in advance for your help.
I'm about to install this mod on my car, but the back button on the screen isn't working. As shown here at 2:43 , is there any way to go back or complete the installation without clicking this back button?
hello, I loaded the necessary files into the USB drive, when I plug it into the car, the USB drive is detected, but after clicking on the menu / software update / update options, I cannot choose the USB option. I need help. My car has the necessary features for Android auto and my car is 2016 model vw jetta.
I get into service mode, but I can't get into green mode when I press and hold to select toolbox. You hear a “bing” sound, but you can’t see any more or anything different than before in service mode 4:03
@@matthewjohnston7932 developer mode is not active, you need odbeleven to activate it and then you can go to the green menu. i did it with all the help of the videos of mrfix
1556 error should not be present with installation of latest version. It was a fileversion inconsitency with old installtion. It is fixable tho. 1555 or SVM Error is also fixable with XOR claculator and some diagnostic software. Good explanation and that you listed everything and not want to stell this toolbox :-) BTW: If you run the build in update script from the menu your old menu entry should be deleted ;-)
Will make a video about 1556 which I have in my unit since some time. It's triggering my OCD every time I scan the car. For the 1555 I've made this tool: mib-helper.com/im-so-xory/ Keep up the good work!
The instructions mention a different procedure for certain versions of the green engineering menu. Does that mean you first need to activate the green engineering menu before you do this? Watching the other video that uses OBDEleven which I don't have. Just checking to see if I need that first.
Hello, I tried to install toolbox, but I got error message: variant error medium. After that many numbers: 1701/1702... to 17220. What is the problem? My train variant is: MST2_EU_VW_P9122D Please help me
Hello Mr-Fix. I just want to thank you for the great videos and the information you provide. It has been a great help. I had my Octavia for six years and the smart link was disabled from factory. I even considered paying £150 to the dealer to install the codes, if I could find a dealer to do it. Thanks to you I have enabled CarPlay only to find that I have to change the usb socket.
Bonjour MR FIX, tout a bord merci pour tout les tutoS que vous mettez a disposition. J'ai un soucis sur la polo 5 - 2015, j' ai installé toolbox v1.33, ainsi que les codes Fecs via OBDeleven pour avoir le carplay.tout a fonctionner comme votre video mais quand je connect le cable
Hi @mrfix , my touch screen doenst work in the top right part. Are there any alternatives on starting the update with the physical buttons or with VCDS?
Thank you Mr Fix.I have bought OBDeleven & activate green menu.Then I have try to install MIB STD' Toolbox via usb & sd card several times but ''START'' button on your video 1.05 do not appear.My car is Jetta with MST2 EU VW PQ P0245T.What should I do .Please help.Thanks in advance
Hi @mr-fix I have golf 7 from 2018 and multimedia device is so called "Discover media" with catalog ID number: 3Q0035846B, Hardware: H41, Software: 0472. Current version on unit is: MST2_EU_VW_ZR_P0472T (0472). Can I use toolbox to remove CID lock for SD cards? I´ve tried but I can´t figure is my device MIB STD2 PQ/ZR Technisat/Preh or MIB2 STD Delphi or MIB2 HIGH Harman unit !? I appreciate if you could help me. Tnx in advance
I have downloaded the 0.7 File from the description, extracted and removed the cpu file and replaced with the toolbox gem cpu file as my system says its gem 3.5, however it does come up as update for sd card on stereo, just reads and wont let me update. I have fec/swaps option too Let me know if i can fix it i have a 2015 passat gt
Am I right in thinking I don't need any of this specialist VCDS etc to use this and unlock smartlink? I just need an SD card and the correct firmware patch? I can't even get the correct advice from skoda themselves even if I wanted to pay for it
Me fix. I’ve been following all the steps to insta toolbox in my VW Jetta Mib2 std with single SD card slot available. But the it seems like patch is not detecting and can’t start the update. Any tips?
@mr-fix i have discover media (2 sd slots on unit itself), current firmware train is mst2_eu_vw_pq_p0245t, on mib solution, newest is MST2_EU_VW_PQ_R0604T, can i just go to that firmware? then install toolbox? or must i usea P0, and noty a R0 firmware? kindest regards
Bonjour MR FIX, tout a bord merci pour tout ces tutos que vous mettez a disposition. j'ai un souci sur ma VW polo 5 de 2015, j'ai installé la mis a jour dans un premier temps puis installé Toolbox v1.33 pour pouvoir installé le carplay. uns fois tout installé via obdeleven pour les codes fec/swap, mais quand je branche le câble, a l'écran il me mais le message "câble usb non reconnu". Pouvez vous m'aider s'il vous plait.merci
This toolbox, does that support install on "Discover Media Gen 2" on Volkswagen? I have already install the green developer menu through OBD Eleven. And does the SD card have to be formatted as fat32 or ext fat?
Hello. I have a passat 2015 b8 with only mirror link (wich needs to be activated btw) but CAN I ADD apple Carplay on my car and activate it? Or does my car not support that
cześć Pan-Fix, dzięki twoimi tutorialami. Ok, so I have Passat B8 2017 Kombi with Discover Media Navigation and I'm wanting to do some updates. I put some files on a 32Gb usb-stick formatted as FAT32 and when I insert it in the USB port in the centre console nothing happens, on the headunit it doesn't let me choose the USB, so is something wrong with that? Thing is I don't have SD-Card reader in my laptop so that's why I wanted to use USB. The other thing is I can't remove my USB port to check if it's got hardware key for carplay/android auto (green plug or purple plug). I want to activate a few things like App-Connect, voice command in steering wheel, video-in-motion without having to buy OBDEleven.
I couldn’t get it to read release information error when trying to install on my 0254T. I ended using a 128GB SD formatting to exFAT and it worked. Make sure you use latest release. Also remember and read about the GEM incase you need to replace cpu folder.
Czy po zainstalowaniu tego toolboxa będzie już mib2 odblokowany? Mam MIB2 Technisat w Leonie 5F. Chcę mieć spatchowaną jednostkę by móc wpisać kod Swap np na Mirror Link lub Sport Performance monitor. Proszę pomóż mi. Aktualnie przy próbie zapisu kodu swap wszystkie zapisane są nieaktywne czyli jednostka jest załatana. Pomóż Kolego :)
Hi, I have 5Q 0 035 874A. Can toolbox help me with intermittent boot loops when starting the journey? Once it overcomes the boot loop, it’s stable. It takes up to 20 minutes to start operating in my Octavia MK3. Someone has unlocked CarPlay for me but the problem didn’t occur immediately after, so I believe that is unrelated. It has the latest software train. Any advice?
Hi Mr Fix. How can I update and install newer green menu ( old one is GEM 3.5 ). I cant install Toolbox cause of this. my unit is Seat mst2 eu zr PO253T. Any idea ??? Thanks for answer :P
Hi i have 1 Slot version Bolero MiB2 Technisat with 5Q0035840B h30. It is posible to do it with USB2HSD cable or not. Is there any way to enabled telnet access? Thank you
Hi, amazing video. I have one question. The first link in this video is updated for the toolbox, and the second video is the toolbox? I have the same MIB2 with the same firmware MST2_EU_VW_ZR_ PO245T So, for now, I activated developer mod with VCDS, and without instal toolbox, when I press MENU butoon 10sec, I get a green screen but not a toolbox option. So something I makes ok. 😂 Now, today, I try updating new firmware for him. The last number is 0254, but he can't recognise the file on a micro card. So, do I need a toolbox for this to turn off something before installing new firmware and then after I unlock the app conect? Thanks in front.
Hallo! From this device mst2_eu_vw_zr_p0475t can i use your generator swap codes? or should i use VW MIB2 Technisat FEC/SWaP Code Generator ? VW Touran 2018
Hello everything ok, I ask you I have the same unit, but the timer reached its limit, is there any way to reverse the counter to be able to install the tollbox?
I have the version MST2_EU_VW_ZR_P0241T with the software H25.14.25_STD2Nav_EU. Cam I update with the toolbox v1.3.3.zip? Also, should I replace /cpu folder? Anything else to do? Thank you!
Mam pytanie,czy masz może film co konkretnie trzeba ściągnąć z internetu i co wgrać na kartę SD aby zainstalować toolboxa.Z góry dziękuję za wszelkie informacje
I have a technisat unit with firmware MST2_EU_VW_ZR_P0241T, can it happen that the installation goes wrong and brick the unit ? The guide is very well done, but I have this fear
Update to 0254 first, next install toolbox. If the installation goes bad (unlikely, but still good that you are keeping this in mind) you can boot the unit into recovery mode and restore the system. Here's a video about it: th-cam.com/video/Pdel-Kb-hZ0/w-d-xo.html
@@mrfixpl Thank you very much for your quick reply. Can I switch directly from my version to the one (0254) you indicate? And could you please tell me where to download the firmware file. Thank you very much, from Italy.
Po zainstalowaniu najnowszego toolboxa chciałem odblokować app conect ale po naciśnięciu patcha swap el... nic się nie dzieje program tak jak by się zaciął
Hello guys I patched a seat Ibiza fr 2018 and after that the monitor doesn’t start every time sometimes is work and sometimes is a black screen any ideas?
After the Toolbox installation do you have to keep SD card in the slot permanently or can you remove it? Also if you remove it after installation is complete would it effect the stereo. Thanks
Hello Mr-Fix, I installed the toolbox successfully! But using it cause a fault! Example: the SD card SID lock removal... Following the steps I got a message like "... the task/servce is already running ..".I used already the GEM workaround - without success ... :-(. Do you have an idea? Thanks in advance...
@mr-fix I am getting cpu NOK now ... on the screen ... with onlineservice NOK when i click on it ? also the unit is not booting to anything now ... can you please help
Hi, I got a 3Q0035842C with GEM 4.11t. The SW train version is MST2_EU_VW_ZR_P0472T. it recognises MIBStd2_Online_Approval(V432-1) from SD card but the start button is not highlighted. I have cpuplus where you have cpu and in front of cpu you have Y and I have N/A. am I doing something wrong? Is it because it only has one SD card slot? This unit is MIB STD2 ZR +/NAV and current software version is H29.319.58_STD2Plus_EU
Hello. I have tried to install Toolbox v08.1.1 on my SEAT with software version MST2_EU_SE_ZR_P0241T and the screen has locked. The system does not reboot. Can anybody help me? Thanks.
Hello mr fix, I made everything as described but my screen keep rebooting and rebooting. After 30mn i had to stop... But even the key out of the car, the screen was still rebooting and rebooting, i had to remove the fuse ... I've no access to nothing, what can i do to reboot it ? Thanks
Hello! I did everything as described, but the test menu doesn't appear even after pressing 10 sec menu, just beep one. What could I ruin? Everything happens the same as in the video.
Hi Mr-fix, I followed every step and at the end I can't access the green menu, it doesn't work. What can I do to make it work? Vw passat (MST2_EU_VW_ZR_P0367T). Thank you very much! 🙏
Could somebody please give me some advise/help? I have the mst2_eu_vw_zr_P0137T installed, but want to be able to install Toolbox so that I can use a map on a custom SD card. I tried to install Toolbox without firmware update with the solution to replace the cpu folder from GEM folder with the one in the root of the SD card so that the root CPU folder is replaced with the GEM folder version. After 10 attempts it keeps saying: start electric test. Mainunit/version compare. Accept this error code leads to restart(translated from Dutch). What should I do to make it work? I hope it will be possible.
Need OBDeleven?
🎟 Get 10% OFF with code: MRFIX10
🛒 mr-fix.info/redirect/obdeleven
I have obd leven and can activate the green menu, do i also need this toolbox sd card to activate android CarPlay?
@@k20dude41 which version of OBDeleven do i need to activate the GEM ?
Mr fix… thank you for all you have done for the VAG community.
Thank you for being here!
Mr-fix, you're a life saver. This and other videos of yours helped me unlock my mid2 with 8inch touch screen. I appreciate all your help and to support, I ordered an shirt.
Thank you all done 10/10 and codes cleared
The delete history in the toolbox is required to clear one of the faults
Successfully installed on my Seat MK3 mib 2 and unlock full link , Thank you so much Mr Fix for sharing all this
you re a STAR
Did u extract the files or just transfer straight to the sd card?
Thank you mr-fix ! Worked perfectly on my Seat ! 😁
Thanks! Straightforward video, greatinstructions... For a topic like this i would even call it foolproof!
Thanks - great video, for any others out there I was able to enable Developer Mode using Carista Evo. Always a little nerve wracking doing these sort of updates so seeing ti work for real really helps. Mine was 2018 Skoda Octavia Amundsen system.
You can additionally install extended green menu GEM.
Just keep the same SD card in the slot and select dedicated option in GEM.
You will be surprised how much extra configuration options is added in.
Thanks! Will definitely look into it!
exclusively
@@mrfixpl 😉
@@mrfixpl and mib1 does it work with it ? because i want use another sd card for navigation
Could somebody please give me some advise/help?
I have the mst2_eu_vw_zr_P0137T installed, but want to be able to install Toolbox so that I can use a map on a custom SD card.
I tried to install Toolbox without firmware update with the solution to replace the cpu folder from GEM folder with the one in the root of the SD card so that the root CPU folder is replaced with the GEM folder version. After 10 attempts it keeps saying: start electric test. Mainunit/version compare. Accept this error code leads to restart(translated from Dutch).
What should I do to make it work? I hope it will be possible.
Hi there,
What else is needed to activate app-connect beside patching the unit with the toolbox.
You mentioned one procedure, can you pls describe the steps
Tried this and didn't work unfortunately and it is a tecknisat mib2 unit but no engineering mode comes up at all.
Thanks for this great tutorial 🙂
The Skoda Amundsen MIB2 Head unit with part number 5Q0035874 comes in 3 different versions; A, B and C.
Do you know if the toolbox software can be installed on all versions?
There is a software and hardware version printed on top of them next to part number. Is this the same software referred to as in the installation instructions?
Thanks 😊
Thank you so much Mr Fix for sharing all this, you rock!
Successfully installed on my VW Touran 2019 (MST_EU_VW_ZR_P0475T)
What you did is really great, thank you for your efforts. My car is a 2015 Jetta. It is made by Technisat and has the version MST_EU-VW_PQ_P0240T. Inspired by another video, I upgraded the version to 253T to see if a feature was added. I activated the green menu with vcds and loaded the mib2 toolbox to the sd card. It recognizes the sd, shows the software version, I click on it and it opens, but the start box at the top is not active. Where am I making a mistake, is it not accepting the 253 version? I wanted to go back to 245, but it won't accept that either. Thank you very much in advance for your help.
Hello, nice work btw but i have another question, is there any support for the ones without the navigation? With only 1 SD card slot.
I'm about to install this mod on my car, but the back button on the screen isn't working. As shown here at 2:43 , is there any way to go back or complete the installation without clicking this back button?
hello, I loaded the necessary files into the USB drive, when I plug it into the car, the USB drive is detected, but after clicking on the menu / software update / update options, I cannot choose the USB option. I need help. My car has the necessary features for Android auto and my car is 2016 model vw jetta.
Hey @Mr-fix really useful info I have just used it to install in my friends car. Thanks for the videos.
I get into service mode, but I can't get into green mode when I press and hold to select toolbox. You hear a “bing” sound, but you can’t see any more or anything different than before in service mode 4:03
I have the same thing, anyone know what the issue is?
@@matthewjohnston7932 developer mode is not active, you need odbeleven to activate it and then you can go to the green menu. i did it with all the help of the videos of mrfix
Same from my side ! And don’t have the Fec/Swap feature in the primary menu ?
Did someone got any feedback ?
1556 error should not be present with installation of latest version. It was a fileversion inconsitency with old installtion. It is fixable tho.
1555 or SVM Error is also fixable with XOR claculator and some diagnostic software.
Good explanation and that you listed everything and not want to stell this toolbox :-)
BTW: If you run the build in update script from the menu your old menu entry should be deleted ;-)
Will make a video about 1556 which I have in my unit since some time. It's triggering my OCD every time I scan the car.
For the 1555 I've made this tool: mib-helper.com/im-so-xory/
Keep up the good work!
@@mrfixpl Zrobiłeś już film o 1556? Czy to chodzi o toolbox i "Clean SWDL history and keep only non-duplicated FW updates"
Hi, Thank you for the information - Should I keep the SD card after the installation or could I remove it?
Unable to read the releases information file. Source not available. What should i do??
Did you find out?
The instructions mention a different procedure for certain versions of the green engineering menu. Does that mean you first need to activate the green engineering menu before you do this? Watching the other video that uses OBDEleven which I don't have. Just checking to see if I need that first.
did u find an answer? i downloaded this and still no toolbox after holding menu for long
@@RubiksProBro you need an obd device like obdeleven to activate the green menu.
Will this tool remove the component protection also?
Hi mr fix, thank u! Do you have a way for delphi too? Thx
Hello, I tried to install toolbox, but I got error message: variant error medium. After that many numbers: 1701/1702... to 17220. What is the problem? My train variant is: MST2_EU_VW_P9122D Please help me
You're installing the Technisat toolbox on a Delphi system. (D on the end of your firmware is for Delphi).
Is the operation completely safe? There are no contraindications? Does it also work with Discover Pro/Media - MIB/MIB2 High? Thank you very much!!
Hello Mr-Fix.
I just want to thank you for the great videos and the information you provide. It has been a great help. I had my Octavia for six years and the smart link was disabled from factory. I even considered paying £150 to the dealer to install the codes, if I could find a dealer to do it. Thanks to you I have enabled CarPlay only to find that I have to change the usb socket.
Merhaba abi bana yardımcı olur musun
Nasıl yaptınız ben de Passat için yapacağım. Bilgi verebilir misiniz
Merhaba serkan bey 2016 optimal octaviam var smartlink açmak istiyorum bana yardımcı olabilirmisiniz bilgisayardan anlarım.
Bonjour MR FIX, tout a bord merci pour tout les tutoS que vous mettez a disposition. J'ai un soucis sur la polo 5 - 2015, j' ai installé toolbox v1.33, ainsi que les codes Fecs via OBDeleven pour avoir le carplay.tout a fonctionner comme votre video mais quand je connect le cable
Hi @mrfix , my touch screen doenst work in the top right part. Are there any alternatives on starting the update with the physical buttons or with VCDS?
Thank you Mr Fix.I have bought OBDeleven & activate green menu.Then I
have try to install MIB STD' Toolbox via usb & sd card several
times but ''START'' button on your video 1.05 do not appear.My car is Jetta with MST2 EU VW PQ P0245T.What should I do .Please help.Thanks in advance
I have the same problem
@@robertgmonje me too
Hi @mr-fix I have golf 7 from 2018 and multimedia device is so called "Discover media" with catalog ID number: 3Q0035846B, Hardware: H41, Software: 0472. Current version on unit is: MST2_EU_VW_ZR_P0472T (0472). Can I use toolbox to remove CID lock for SD cards? I´ve tried but I can´t figure is my device MIB STD2 PQ/ZR Technisat/Preh or MIB2 STD Delphi or MIB2 HIGH Harman unit !? I appreciate if you could help me. Tnx in advance
I have downloaded the 0.7 File from the description, extracted and removed the cpu file and replaced with the toolbox gem cpu file as my system says its gem 3.5, however it does come up as update for sd card on stereo, just reads and wont let me update.
I have fec/swaps option too
Let me know if i can fix it i have a 2015 passat gt
Would you still use v0.7 for this or better to use the latest version? Trying to unlock MIB2 in 2017 VW Passat
Now these are the toys i like 👍🏴🤘
Me too! Will try to make some cool custom graphics for the unit. Hopefully not brick it 😅
Ola meu amigo, sou do Brazil, baixei, acessei mas não a tela verde pra desabilitar o CP protect pode me ajudar?
Still works perfect in 2024
do you also have a guide for Solderless way of installing Toolbox on Composition Media?
Am I right in thinking I don't need any of this specialist VCDS etc to use this and unlock smartlink? I just need an SD card and the correct firmware patch? I can't even get the correct advice from skoda themselves even if I wanted to pay for it
Me fix. I’ve been following all the steps to insta toolbox in my VW Jetta Mib2 std with single SD card slot available. But the it seems like patch is not detecting and can’t start the update. Any tips?
@mr-fix i have discover media (2 sd slots on unit itself), current firmware train is mst2_eu_vw_pq_p0245t, on mib solution, newest is MST2_EU_VW_PQ_R0604T, can i just go to that firmware? then install toolbox? or must i usea P0, and noty a R0 firmware? kindest regards
Bonjour MR FIX, tout a bord merci pour tout ces tutos que vous mettez a disposition. j'ai un souci sur ma VW polo 5 de 2015, j'ai installé la mis a jour dans un premier temps puis installé Toolbox v1.33 pour pouvoir installé le carplay. uns fois tout installé via obdeleven pour les codes fec/swap, mais quand je branche le câble, a l'écran il me mais le message "câble usb non reconnu". Pouvez vous m'aider s'il vous plait.merci
Is it essential to get a diagnostics tool or can I do it with just toolbox and SD card? MIB2 Standard
This toolbox, does that support install on "Discover Media Gen 2" on Volkswagen?
I have already install the green developer menu through OBD Eleven.
And does the SD card have to be formatted as fat32 or ext fat?
Hello. I have a passat 2015 b8 with only mirror link (wich needs to be activated btw) but CAN I ADD apple Carplay on my car and activate it? Or does my car not support that
cześć Pan-Fix, dzięki twoimi tutorialami.
Ok, so I have Passat B8 2017 Kombi with Discover Media Navigation and I'm wanting to do some updates. I put some files on a 32Gb usb-stick formatted as FAT32 and when I insert it in the USB port in the centre console nothing happens, on the headunit it doesn't let me choose the USB, so is something wrong with that? Thing is I don't have SD-Card reader in my laptop so that's why I wanted to use USB. The other thing is I can't remove my USB port to check if it's got hardware key for carplay/android auto (green plug or purple plug). I want to activate a few things like App-Connect, voice command in steering wheel, video-in-motion without having to buy OBDEleven.
I couldn’t get it to read release information error when trying to install on my 0254T.
I ended using a 128GB SD formatting to exFAT and it worked. Make sure you use latest release. Also remember and read about the GEM incase you need to replace cpu folder.
How to replace cpu folder I don’t get it
Czy po zainstalowaniu tego toolboxa będzie już mib2 odblokowany? Mam MIB2 Technisat w Leonie 5F. Chcę mieć spatchowaną jednostkę by móc wpisać kod Swap np na Mirror Link lub Sport Performance monitor. Proszę pomóż mi. Aktualnie przy próbie zapisu kodu swap wszystkie zapisane są nieaktywne czyli jednostka jest załatana. Pomóż Kolego :)
Proszę th-cam.com/video/a9uwYmBPc1Q/w-d-xo.html
Hi, I have 5Q 0 035 874A. Can toolbox help me with intermittent boot loops when starting the journey? Once it overcomes the boot loop, it’s stable. It takes up to 20 minutes to start operating in my Octavia MK3. Someone has unlocked CarPlay for me but the problem didn’t occur immediately after, so I believe that is unrelated. It has the latest software train. Any advice?
Hi Mr Fix. How can I update and install newer green menu ( old one is GEM 3.5 ). I cant install Toolbox cause of this. my unit is Seat mst2 eu zr PO253T. Any idea ??? Thanks for answer :P
Hi i have 1 Slot version Bolero MiB2 Technisat with 5Q0035840B h30. It is posible to do it with USB2HSD cable or not. Is there any way to enabled telnet access? Thank you
Dear Mr. Fix, i tried to do a patch for the Navi SD card. everytime it says 'backup failed' and than patch not installed.
Please open a ticket on the code repository with details about your unit.
I followed the steps but i can’t press start for update( it’s a unit with one card slot) What is happeing?
same for me
Hello.
Could you help me MST2_Eu_VW_ZR_P0241T
installation does not want to go in the green menu?
Thanks
i replace the \cpu folder with the one from \toolbox\gem\cpu. , but GEM is still 3.4 version ?
Guys, How do I know if the Developer mode needs is enabled?
Thank you so much for this content
Yes, developer mode needs to be enabled in order to access GEM.
How do I know if the Developer mode is enabled? my VW is from 2017. do I still need it? @@mrfixpl
Is it possible to provide instruction for installation of MIB STD2 Toolbox for units without Navi and with only one 1 SD Card?
Would like this one to
Hi, amazing video. I have one question. The first link in this video is updated for the toolbox, and the second video is the toolbox? I have the same MIB2 with the same firmware MST2_EU_VW_ZR_ PO245T
So, for now, I activated developer mod with VCDS, and without instal toolbox, when I press MENU butoon 10sec, I get a green screen but not a toolbox option.
So something I makes ok. 😂
Now, today, I try updating new firmware for him. The last number is 0254, but he can't recognise the file on a micro card. So, do I need a toolbox for this to turn off something before installing new firmware and then after I unlock the app conect?
Thanks in front.
Hi
For Bolero radios any tools to changing the reboot wallpaper screen or adding new wallpaper on screen? Thank you
Bonjour et merci a toi . J'ai su installer le GEM 4.3 MIBSTD2 MAIS lorsque je vais dans" toolbox" et puis "tools" je n'ai pas de "patch" ???
Hello when i make update via sd my update button is gayed out. Do you know where is problem please??? I dont have cpu and other listed there
Hallo! From this device mst2_eu_vw_zr_p0475t can i use your generator swap codes? or should i use VW MIB2 Technisat FEC/SWaP Code Generator ? VW Touran 2018
Hi, I have this version MEN2_EU_VWGPx_P0180L can I install the std2 mib to finally unlock the car play ?
I can’t press back and now my screen is stuck. How can i fix this. I have OBDeleven
Please help MIB2 discover media won't take any updates including the toolbox they show on the SD card but after 1st reboot it gets stuck ?
Hello everything ok, I ask you I have the same unit, but the timer reached its limit, is there any way to reverse the counter to be able to install the tollbox?
What timer?
I have the version MST2_EU_VW_ZR_P0241T with the software H25.14.25_STD2Nav_EU.
Cam I update with the toolbox v1.3.3.zip? Also, should I replace /cpu folder?
Anything else to do?
Thank you!
Mam pytanie,czy masz może film co konkretnie trzeba ściągnąć z internetu i co wgrać na kartę SD aby zainstalować toolboxa.Z góry dziękuję za wszelkie informacje
I have a technisat unit with firmware MST2_EU_VW_ZR_P0241T, can it happen that the installation goes wrong and brick the unit ? The guide is very well done, but I have this fear
Update to 0254 first, next install toolbox.
If the installation goes bad (unlikely, but still good that you are keeping this in mind) you can boot the unit into recovery mode and restore the system. Here's a video about it: th-cam.com/video/Pdel-Kb-hZ0/w-d-xo.html
@@mrfixpl Thank you very much for your quick reply. Can I switch directly from my version to the one (0254) you indicate? And could you please tell me where to download the firmware file. Thank you very much, from Italy.
from the USB doesn't work right? I had an error and the toolbox was not installed.
Hi any help my compass in my mk3 seat leon says compass currently not available what could this be due to would appreciate a reply thanks
Po zainstalowaniu najnowszego toolboxa chciałem odblokować app conect ale po naciśnięciu patcha swap el... nic się nie dzieje program tak jak by się zaciął
Salut peut ont activer le carplay avec ? Le toolbox
How to know waht toolbox to use for discovery media MIB 2
Tiguan 2019? Thanks
Check mib-helper.com
Do you know if does it work with MIB2 High with Dynaudio system in VW Passat 2016?
Hi. I have GEM 3.5 so will my green menu update to GEM 4?
Could it work for Skoda octavia 2018 which has not applink activation
Followed the instructions, but holding the menu button doesnt show the test mode
I hsve the mst2_eu_vw_zr_p0468t
With std2nav_eu
Hello guys I patched a seat Ibiza fr 2018 and after that the monitor doesn’t start every time sometimes is work and sometimes is a black screen any ideas?
I try with near same version (seat not vw) and i can’t launch update. Do you know why ?
After the Toolbox installation do you have to keep SD card in the slot permanently or can you remove it?
Also if you remove it after installation is complete would it effect the stereo.
Thanks
Did you find an answer to this?
you find answer?
Do you need a special sd card from skoda?
Hello Mr-Fix, I installed the toolbox successfully! But using it cause a fault! Example: the SD card SID lock removal... Following the steps I got a message like "... the task/servce is already running ..".I used already the GEM workaround - without success ... :-(. Do you have an idea? Thanks in advance...
could you fix it? I have version 1.3.3 and disabling CID and CP has no effect, when I try again I see lines of code with errors.
@mr-fix I am getting cpu NOK now ... on the screen ... with onlineservice NOK when i click on it ? also the unit is not booting to anything now ... can you please help
Hi , tell me something does this method works with MIB1 and if it works is it the same process ? thanks in advance
How do get GEM 4.11? I have Toolbox v4.2A but GEM 3.4. Or is it possible to activate Apple carplay with GEM 3.4 via MQB Coding?
Hi, I got a 3Q0035842C with GEM 4.11t. The SW train version is MST2_EU_VW_ZR_P0472T. it recognises MIBStd2_Online_Approval(V432-1) from SD card but the start button is not highlighted. I have cpuplus where you have cpu and in front of cpu you have Y and I have N/A. am I doing something wrong? Is it because it only has one SD card slot? This unit is MIB STD2 ZR +/NAV and current software version is H29.319.58_STD2Plus_EU
I have the same issue plaese help me if you solved it
Is it working on the Skoda Octavia A7 with mib2 swing?
Hello. I have tried to install Toolbox v08.1.1 on my SEAT with software version MST2_EU_SE_ZR_P0241T and the screen has locked. The system does not reboot. Can anybody help me? Thanks.
Hello mr fix,
I made everything as described but my screen keep rebooting and rebooting. After 30mn i had to stop... But even the key out of the car, the screen was still rebooting and rebooting, i had to remove the fuse ... I've no access to nothing, what can i do to reboot it ?
Thanks
I did it like this :
if your unit have GEM in version 3.4 or 3.5, replace the \cpu folder with the one from \toolbox\gem\cpu.
Hello! I did everything as described, but the test menu doesn't appear even after pressing 10 sec menu, just beep one. What could I ruin? Everything happens the same as in the video.
Same thing happened to me?? Any update mate?
Same Problem here. Please help!
I got 2 sd card unit with MST2_EU_VW-ZR_PO468T and i cant find any toolbox version that supports that firmware so is there any other way to do it ?
How about update to P0478T and installing toolbox then?
hi i want to install car play for my car radio mib2 Volkswagen Touran model 2018 please tell me how?
Hi Mr-fix, I followed every step and at the end I can't access the green menu, it doesn't work. What can I do to make it work? Vw passat (MST2_EU_VW_ZR_P0367T).
Thank you very much! 🙏
hi do you fix that ? i have the same problem
Could somebody please give me some advise/help?
I have the mst2_eu_vw_zr_P0137T installed, but want to be able to install Toolbox so that I can use a map on a custom SD card.
I tried to install Toolbox without firmware update with the solution to replace the cpu folder from GEM folder with the one in the root of the SD card so that the root CPU folder is replaced with the GEM folder version. After 10 attempts it keeps saying: start electric test. Mainunit/version compare. Accept this error code leads to restart(translated from Dutch).
What should I do to make it work? I hope it will be possible.
U mnie brak cpu /y i nie jest podswietlony napis rozpocznij, co za lipa moze być?
Is there any guide for MST2_EU_SE_ZR_P0514T - 5f0 035 874a ? Probably needs emmc to usb as I can understand.
Greetings my media is std2plus with p0254t,will it work?
Hi ! Does exist MIB toolbox for version software in 05xx ? Mine is in 0514...
Dzięki stary biorę się do roboty, jak się wszystko uda stawiam czteropak blikiem