absolutely a great idea and it works good but for some reason the vendetta pinion gears wont line up correctly with the limitless spur gear so i used the felony pinion gear and no problem and after running i noticed the red pivot started moving down even after tightening the grub screws what else can i do to stop that from happening and i am also using a 150 amp esc and the felonys stock motor set up for this vendetta
I am going to make a 39t spool for my vendetta. Would it be wise to change the motor and ESC or can I use the stock electronics? If I should change them,what would you suggest?
Do you still use that black plastic piece that's up against the bearing that by the red nut that tightens the spring.? How much do you tighten down the red nut?
This is a awesome mod, thanks for showing us this. Awesome videos and 132mph on your vendetta, wow!!! Nice job man
No problem anything to help
Thanks man this was simple, direct and to the point.
No problem brother and merry Christmas to you and the family and happy new year
Good info and well explained! You’re right no one showed how to do it
No problem my brother and merry Christmas and happy new year to you and the family
Nice job my brother, you are going to see some good numbers with that change. Keep doing your thing my brother 👍🏾👍🏾👍🏾
Thts awesome bro seriously tho..I'm getting a Arrma infraction mega 1/8 4x4
Great stuff man I will do the same on mine
absolutely a great idea and it works good but for some reason the vendetta pinion gears wont line up correctly with the limitless spur gear so i used the felony pinion gear and no problem and after running i noticed the red pivot started moving down even after tightening the grub screws what else can i do to stop that from happening and i am also using a 150 amp esc and the felonys stock motor set up for this vendetta
Limitless spool is Mod1 the vendetta spur is Mod 0.8 thats why it won’t mesh
Did you have to cut the plastic that holds the bearing?
I am going to make a 39t spool for my vendetta. Would it be wise to change the motor and ESC or can I use the stock electronics? If I should change them,what would you suggest?
The spool works very well, I added a 6s system. Hobbywing max8 and an Arrma 2050kv motor. That car smokes the tires with ease and it’s fast
Any part number on the thing u need to complete the spool gear ????
Do you still use that black plastic piece that's up against the bearing that by the red nut that tightens the spring.? How much do you tighten down the red nut?
I have the same question, did you find the answer or solution?
Arrma should make all models with a center diff imstead of the power module.
So did you have any problems keeping it centered because I use the black plastic piece to keep it centered
Not at all 😉
The ID of the Limitless spool is oversize for the Infraction/Vendetta slipper shaft. They should not be paired as shown here.
Can The Stock Motor Handle The Volts & High Tall Gearingm
Yes, without a problem depending on the gearing
How many cells are you running through?
Can we use this spool for bashing and messing around or is this only for speed runs??? Awesome video
Hell yeah
Bori cual es el spur gear no lo encuentro q tenga pa ponerle los tornillitos
Ya lo encontré no entendí cuando dijiste mod1 ahora me falta montarlo
Is that the stock motor?
What pinion did u use ??
I believe it was a 25 t
What pinion are you using
I’m starting with a 22 pinion
Okay cool
Got to use a mod1 pinion right?
Yes sir
What Does A Spool Do?
It will make your car faster
@@rcboricua4life693 Ooh I See.. But Will It Strip The Diffs? Tho?
Yes,
@@rcboricua4life693 Ok Thanks For The Info..