Man Transforms Plastic Drums into an Amazing Boat | Start to Finish Build by
ฝัง
- เผยแพร่เมื่อ 15 มี.ค. 2024
- Watch as a skilled craftsman transforms ordinary plastic drums into an incredible boat in this captivating start-to-finish build! Join us on a journey of creativity and innovation as we witness the remarkable process of turning simple materials into a floating masterpiece. From conception to completion, witness every step of the transformation and be inspired by the ingenuity and dedication behind this amazing project. Don't miss out on this mesmerizing showcase of craftsmanship and resourcefulness!
We hope you enjoy your time on our channel. Tell us which topic you would like to see and we will definitely consider it
If you like our content subscribe to the channel and activate the bell button
Thanks for choosing TechFreeze
araujo kayak
/ @araujocaiaque
Music: Epidemic Sound
www.epidemicsound.com/referra... - วิทยาศาสตร์และเทคโนโลยี
13 years ago, I designed a 17 foot canoe that used two 4x8 sheets of 1/4 inch CDX plywood & two 20 foot spruce 1x4's. It was a project with my 15 year old grandson. We designed it "on the run" with only fewbasic sketches to convey the basic ideas. It turned out very good. Only wish we could've afforded marine plywood. Over the years stored on saw horses outside, some entrapped water allowed rot in a few places. It is a "one off" canoe, like no other on earth. Until he gets inspired to renovate it & put fiberglass instead of the paint, it is shrinkwraped & hung from the ceiling of a shed. Getting married & other things of life has allowed it to be set aside. We were so proud when it was first put into the river for it's maiden voyage & it performed better than we could have hoped for. 😊
Que bonito recuerdo. Admirable. Me recuerda a la relación que tenía con mi abuelo. Espero tengan muchos más proyectos juntos
Memories 👍🏻🏴
Good for you , sir !
Priceless experience you both will never forget …
I built my first boat with my father when I was 12. It was an 8 foot Pram Dinghy. It was a great little boat. I learned a lot about woodworking from my father. I miss him and my first little boat. I wouldn’t trade that experience for anything in the world. Watching this video brought back a flood of great memories. Thank you😊
Не будь дырявым старый таз, длиннее был бы наш рассказ ;)))
👍🤣 с языка снял..
귀염둥이 녀석 아주 많이 잘했구나.... 굿 보이
THE BEST BARREL BOAT I'VE EVER SEEN. THE CRAFTSMAN IS A GENIUS.
Very interesting, but nailing the plastic to the frame will not last. As the boat is used, the nails will gradually pull out. Screws would work much better. Also the joins between each piece of plastic have to be sealed against water coming in. How do you do that? Some kind of tape or adhesive or liquid that you could melt with a heat gun might work.
Главное ведь в чем, человек из подручного материала, минимум инструмента - дал вам надежду, что и вы можете сделать а может и лучше.
Meu amigo Você e um engenheiro de verdade,parabéns pelo seu trabalho 👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍
@@HighTech.360 sim, é bem bonito o barco dele, mas eu nao entraria, parece q vai desmanchar, assim como o submersivel aceangate
Really glad to see the deck added to step on. Was worried about someone stepping on the drum hull and the bottom nails coming loose.
Wow Amazing
Excelente vídeo 👏🦅
Not only recycled barrels. With a sense of Beauty.
По сути, человек нашел материал в виде бочек.Им мог быть любой листовой материал,но видимо бочки оказались доступны.Все равно уважаю мастера
Интересный проект, амиго!
1:05 гусь в текстуре застрял
Плохая прорисовка😂😂😂😂😂😂
Luar biasa kreeen banget bosqu, semoga sukses selalu
Excelente
A very nice alternative to using (now very expensive) plywood sheets. 👍Bon voyage! 🇬🇧
Great job!
У нас сейчас наверно дешевле купить надувную лодку в магазине. И не заморачиваться.
Ключевое слово::НАВЕРНОЕ ::
That thing will leak like a sieve at the seams. Poly has to be heat welding at the seams with a nitrogen gas feed. No adhesive will "stick" to poly for long.
Actually, hot glue sticks really well to HDPE and in water will never come loose due to cool temperatures.
@@HighTech.360 Да, я думаю, за безопасность можно не беспокоиться. Вспомни как совсем недавно батискаф около Титаника раздавило. Вот там да. Погрузились на самодельном корыте на большую глубину. А тут, даже если эта лодка развалится, ничего страшного не произойдет. Главное спасательный круг с собой возить 😅
Resourceful and clever! thanks for sharing, that's awesome
Lo mismo me pregunté, tendrá filtraciones de agua 😥
Para mim ficou ótimo. Só repetiria o exterior com fibra de vidro, iria garantir que não iria entrar água, e esse barco duraria muitos anos!
That boat must be a barrel of fun.
Как уже заметили другие комментаторы в России такие бочки стоят немало,потому что им найдется не мало применений.
Дешевле купить листовой пластик в магазине.
Кроме того попадается всякий упаковочный материал с подходящими свойствами.
У нас иногда упаковка лучше чем содержимое.
По 800 руб б/у 200л бочки, это дорого?
@@Mokyteiда и новая 2 рубля😂
Меня удивило что он сперва смонтировал а потом стал пропитывать, но ведь не везде доберёшься
@@Mokytei с чего 200? у нас 1500-2000р. Железная бочка 500 р.
Bravo , você é um engenheiro e artesão de alma 👋👋👋👋👋👋
Давайте скинемся ему на шуруповерт штоли) ну какие гвозди))
Шурупы и прочие саморезы - не всегда хорошо.
гвозди из нержавейки, простые в гидроксид за лето.
Bel lavoro, però personalmente avrei messo due costolature sul fondo per migliorare la stabilità 👍
Ещё и плавать может, классно, спасибо за видео
Bravo
Отлично , правильно!!!
¡Qué impresionante transformación! Este video muestra cómo la creatividad puede convertir algo tan común como tambores de plástico en una increíble embarcación. ¡Felicidades por el ingenio y la habilidad demostrada!
как он добился герметичности стыков? только за счет гвоздей и резинки? онож потечет через пару дней когда гвозди расшатаются
ещё и переломиться по стыкам.) Смелый чувак!)))
а видео-то уже снято!
Оно потечёт сразу же, после спуска на воду.
Скорее всего стыки пропаиваются, только автор почему то этот процесс не выложил.
@@user-pj6li5mp9o там за этот момент как бы отвечают бортовые стрингера.
да резинка и гвозди. безумие и отвага =))
V nice
В России такие бочки хорошо идут под воду на даче, они прослужат не один десяток лет
У меня такая бочка просто стояла в гараже. Через 10 лет стала хрупкой, при том что окон нет и есть отопление.
Молодец 🫵👍🤝
У него даже торцовка самодельная😂.С теплом из Сибири ❤
Ты почему не на СВО ? Аболтус
Wird Zeit sich einen Elktronagler oder Tacker anzuschaffen 😂
Thank you for the update, TechFreeze..!! Amazing, amazing work of the craftsmanship.
I really enjoyed watching this build, the use of those plastic barrels is a great idea. Much more resistant to damage than wood and fiberglass I think. We have a lot of coral here and we would need to slowly find our way around them because of possible damage to the wooden hull then the thought of needing to repair. I use my plastic kayak without much difficulty in the same situation. This plastic boat would be ideal. Thank you for a great video!!!!
Very intalegend 🎉🎉🎉
Brilliant idea! Result is amazing😉👍🏻
I Hope my fellow Filipino fishermen will see these kinds of ideas on how to use or recycle plastic drum
Watched my grandfather build a canoe from plastic barrels even added a Kiel in center of bottom !!
Из какой вы страны?
не- зто точно не вариант.....гвоздики...что они удержат? все развалится в ответственный момент...ладно ,повисилил,и на том спасибо!😊🙃
пофиг)) чел - хайпанул - это главное! )))
Logically it appears all well, but theoretically speaking, those iron nails along the bottom seams, will over time, with exposure to water, give way , leading to water ingress.
Its better if the plastic seams are flame welded for water tightness, and a few nut bolts amongst those nails will make it more reliable.
That water drum in the front has probably been filled with sand or gravel in order to counter balance the weight of the man and the motor behind, which is not the case with a wooden canoe.
Finally, i recommend a prayer and a life jacket along with the BOARDING PASS 😂
Beleza muito bem 👍👍
Я не плавал бы на этом по середине реки.) Это корыто переломиться по стыкам в любой момент.)
Бортовые стрингеры как бы держат корпус. На честном слове конечно, походу автор про сопромат даже не слышал нигде.
😂 Ну вазми сабой камеру от авто грузовика ,если разломится попалам лодка из бочка.
Строительство лодки начинается с киля. А его здесь нет🤣. Планшир в роли каркасной детали, так себе идея. Пластиковая обшивка держит шпангоуты😅, а не наоборот. Про гвозди говорить не буду. У автора очень своеобразное понятие о сопромате и конструировании😅. Хотя, как способ убить время, вполне подойдет. Только далеко от берега на этом "Титанике" заплывать категлрически не рекомендуется.
❤❤❤
Tuyệt vời
Hello sodaraku luar biasa hasil perahu dari drum plasticnya sangat bagus sekali👍👍👍❤🎉🎉
This is durable
Excelente idea y muy buen trabajo,felicitaciones amigo!
I love the ingenuity. The things people can do if they just do it.
А космический корабль он может сделать из железных бочек ? Или тазик только из отходов тары. Племя тумбо- юмбо-барабан у которых запас словарный 200 слов может этому научиться в течении 2-3 месяцев. И даже молоток могут на свалке отходов найти и гвозди кривые. А старую рессору от автомобиля разогреют на костре и это станет паяльником. Удобная и дармовая штучка для вылавливания мутанта рыбки из загрязнённого химикатами водоёма. - Ноги в воде не расплавятся от кислот.
Try and repair holes in HDPE , you need a reducing flame, and no oxidation, special epoxy. Problem is extremely low surface energy.
@@catsupchutney I can see that f you want to bond the plastic. Mechanical repairs, much like the inner tube,gasket are probably the way to go. Also, have you ever tried to poke a hole in a plastic drum? I'm thinking these boats are pretty robust.
Мужик! Если бы ты.
Участвовал бы в строительстве.
Титаника. Он точно бы не потонул
Не смог бы отплыть?)
@@Terraforming1 утонул бы прямо со с стапелем
Excelente excelente gracias
У него там есть склад с бесплатными бочками ?!)) 😂😂
У нас такие бочки стоят 25 $ за штуку))
Они везде так стоят. Дешевле только прям грязные из-под чего-то трудно отмываемого
не - тут самое смешное что этот деятель пробивает их гвоздями, в то время как есть простейшая технология пайки этого материала, это же полиэтилен.
А шпангоуты можно было бы вклеивать или так же впаивать в уже цельный корпус.
Ждём в следующем видео:"байдарка из стекло арматуры,хомутов и стрейч пленки!"🎉
@@user-fr6ep8uy1f адвокат Егоров уже делал такое
@@user-fr6ep8uy1f из плёнки уже есть)
he is here from our Brazil. A hug to everyone.
Buen trabajando felicitaciones
Excellent job well done sir Wow no that's a boat and what an amazing achievement to have built it's true a man who has a shed is well in the head. Blooming marvellous boat.
Parabéns pelo capricho
Mis felicitaciones mi señor, el ser humano necesita mas soñadores. Dios lo bendiga.
muy buen trabajo la verdad
Muy bonita pero como obra de arte fuera del agua
Excellent work !!!
Ingenioso !!!
No leakage..well done..
kỹ thuật giỏi quá, thật khâm phục
Boa tarde ficou top seu barco ⛵️ irmão que Jesus abençoe vc
THAT'S REAL SKILL GOOD JOB
Отлично получилось!
My compliments on great creativity and eco-friendly idea. Very good idea, and forever design.
Могу подсказать как сделать эту лодку погружной на глубину 2 метра и дышать в ней пока рассматриваешь рыбок в иллюминатор . Фотоаппарат не подскажу как сделать - и он его не сможет сделать. Пусть рисует красками из глины этих рыбок.
Как можно приобрести такую ложку?
Excelente idea 👍
Muito bom muito inteligente meus parabéns 😊
Muito show!
AMAZING 😊
cool boat.. good job!
Muito show 😊
Гвозди лучше медные использовать. Не будут ржаветь!
nice sir
Нужен киль. А для весел тем более.
A sabedoria do Homem. Vem de DEUS Mesmo !
Está isolado da água pelo simples fato de estar pregado na câmara de ar? nossa nem imaginava.
Once the sections of the barrel are nailed to the ribs of the canoe would it maybe be an idea to go along the drum where the nailed edges are with a heat-gun? Not to melt it but just so that the plastic readjusts to it’s new shape and isn’t putting unnecessary strain on the nails as it try’s to spring back to its original shape? I dunno. Seems like a good idea to me with my limited knowledge of plastics and physics.
Hello, I have a side business as the devil's advocate so I think nails will come loose if you take the stress out. Only try will tell.
Excellent ! 👌👍😍
Ingenioso el hombre
wow, it's cool technology!
Safety first. No bargain.
Genial.....haré uno
Bravo 👏 good job 👍
Great job using your head well done.
Muy lindo👌
👍👍👍
In the name of God, God willing, Blessed be the Most Merciful, may God grant you success
Great idea and very durable, i want one.
Не дешевле взять лист пластика и сделать лодку. Чем сначала покупать бочки, деласть из них листы а потом лодку😂😂😂😂😂😂
Aqui é Rosa do canal chega o zoom, o homem sempre surpreende com suas criações 😊
самое тяжёлое наверное было сделать первую лодку и лекала!
المسامير سيصيبها الصدأ، لو كانت من الإنوكس ستكون مثالية
MUY BUENA IDEA DE FABRICACION FILICIDADES
Kratifität kennt keine Grenzen
Such a great use of old plastic barrells .
Good diy skills ❤👌