That would be great for home security, specially on more remote areas. How about building one with a narrower beam (20 degrees?), remotely controlled and coupled to a security cam? (so one could control the rig from inside the house)
These are great for a truck I got mine on amazon. Came in the 2nd day fast shipping. Love it. going to add a small boost converter to run it on low and the built in driver for on High beam but going to use a 150w boost converter in order to run it off 12v to 27.5v. Inefficient but that is what I have for now. can wait for the parabolic reflector!!!
How long do you think it will be untill I can get my hands on one of those parabolic reflectors? When they are avaliable I will definitely be buying one!
Hello, I need a 100W (or more) LED light, the smaller the better. I went on the StratusLed website but it looks like they don't have the one in this video available anymore. Does anyone have some advice on where to look? Thank you very much in advance!
Can't get mine to work... Got a 24v 6a power supply and one of them is flashing really fast almost like a strobe and the other one slowly, once a second... Can someone help me with that????
is you battery charged? because it might be the battery voltage dropping too low and then the driver turning off because of low voltage, or because your batteries cant provide enough current
Trying to mount on my mavic pro. I can tap out 12v from the power pack, but this is to low to power the driver. I found a step-up converter to bring the 12 to 24v at 5amps, but it seems kind of redundant to power the LED driver that powers the LED. I believe I could just find a step-up converter that would power the LED directly, but I don't know if this will work or what the LED voltage is. Does anyone know if this will work and if so what the LED voltage is??
Yup, this works. Got a 600w cc cv regulator. Tuned the voltage to 30v (not 24 like it says on the amazon page) and limited current to 7 amps. Hooked it up to my dji mavic battery by opening it up and soldering directly to the main leads and drilling holes to mount an external jack. The light seemed stable without the additional draw of the motors. I might have to turn down the current once the motors are running :/
Those are 3$ led chips on ebay and a driver on ebay is like another 6 to 7 $ the lens another 2$ the heat sink I'm not sure I use a pc one around 10$ for a grand total of 22ish $ Canadian. I expected you would make a good profit but u looked at the prices on your website they are almost 200$... I mean I wish you all the best I hope you sell a lot but why not make something more simple like buying a bunch of the eBay parts for 22$ and putting them together and reeling for like 40$ you would make a good profit and sell way more.
It would be nice if there were separate fan and LED driver enable pins, that way a micro could turn on the fan and PWM the driver to control brightness. Or possibly a single enable line but with some turn off delay on the fan so that the PWM signal doesn't reach it.
I would like to make soe thing like this instagram.com/p/BSXqktvjicq/ for as a bicycle light. And i see that this one that is in the video is much lighter then the one that i have on Instagram. is there a wayto adjust the brightness?
Congrats on the add gig. happy to see things taking off.
That would be great for home security, specially on more remote areas.
How about building one with a narrower beam (20 degrees?), remotely controlled and coupled to a security cam? (so one could control the rig from inside the house)
love this thing. i want to use this to fly fpv at night and get some cool footage, but i wonder if can dim it with an aux. good work🙌
first. Can't wait to get mine. I am going to mount them on the front of my truck
First to comment and I bet you have YET to even buy these, let alone put 'em on your truck. BFD, bud.
These are great for a truck I got mine on amazon. Came in the 2nd day fast shipping. Love it. going to add a small boost converter to run it on low and the built in driver for on High beam but going to use a 150w boost converter in order to run it off 12v to 27.5v. Inefficient but that is what I have for now. can wait for the parabolic reflector!!!
ZenZaBill o
Great overview! thanks!
How long do you think it will be untill I can get my hands on one of those parabolic reflectors? When they are avaliable I will definitely be buying one!
parker benz there's a chance they will be available in June. Otherwise they won't be available until August.
rctestflight thats great! Will I be able to purchase the reflector separately? Im about to buy one unit, maybe two!
Iluminação excelente. Rio RJ Brasil
Cant seem to find any tutorial on how to make these lights waterproof...
I'd like connect to a motion detector for outdoor use. can you recommend a motion detector for this use?
Sooo much POWAAAHHH oh yeahhh =]
Can this light be used for growing the marijuanas indoors?
Need for you to get this back on Amazon, please; the modules I want (for flood lighting, not spot lighting) is Currently Unavailable. Thanks!
I buy one of these but accidentally burn the diode zener (DZ1) can you please help me how many volt is that diode DZ1
startus i need one setup for replacing my projector lamp.. and i want to power that from projector
can you run several of these in series, can it run off of a 12v source such as wiring it to a car battery, can it withstand vibrations, and shock?
James Gottsch 24v system
nice wiring diagram ;)
sir can u pl tell me how I make circuit for my truck 12 v 100w led
Hello, I need a 100W (or more) LED light, the smaller the better. I went on the StratusLed website but it looks like they don't have the one in this video available anymore. Does anyone have some advice on where to look? Thank you very much in advance!
The 3200K version is currently in stock and available for purchase on the StratusLEDs website
Looking for esp32 code with artnet. Is there one out there.
Can't get mine to work... Got a 24v 6a power supply and one of them is flashing really fast almost like a strobe and the other one slowly, once a second... Can someone help me with that????
is you battery charged? because it might be the battery voltage dropping too low and then the driver turning off because of low voltage, or because your batteries cant provide enough current
can this be mounted on a bike to do mtb???
is the reflector for the small beam available ?
Second, nice vid mate:)
Where doi get the led driver
How long can you run the light before it gets too hot?
Hamish Woyka well I made my own that can run indefinitely.
How many hours of on time are they rated for?
Can't find the tutorial on how to make it waterproof. Someone who knows how to do it, or where to find the tutorial :)
Anton Landen I was wondering the same thing
Trying to mount on my mavic pro. I can tap out 12v from the power pack, but this is to low to power the driver. I found a step-up converter to bring the 12 to 24v at 5amps, but it seems kind of redundant to power the LED driver that powers the LED. I believe I could just find a step-up converter that would power the LED directly, but I don't know if this will work or what the LED voltage is. Does anyone know if this will work and if so what the LED voltage is??
Yup, this works. Got a 600w cc cv regulator. Tuned the voltage to 30v (not 24 like it says on the amazon page) and limited current to 7 amps. Hooked it up to my dji mavic battery by opening it up and soldering directly to the main leads and drilling holes to mount an external jack. The light seemed stable without the additional draw of the motors. I might have to turn down the current once the motors are running :/
7 amps? pls dont go over 3 amps for 30 volt 100 watt leds, because they will not last long drawing 7 amps.
My switch doesn't work anymore. Just stays on all the time. Anyone have this issue?
nice!
is it possible to add a potentiometer for brightness?
Max Harper No. But you can use PWM from an arduino for example to dimm
what about a triac? wanna use it on a bicycle like this vid. instagram.com/p/BSXqktvjicq/ I have 2x 100w led chips.
Those are 3$ led chips on ebay and a driver on ebay is like another 6 to 7 $ the lens another 2$ the heat sink I'm not sure I use a pc one around 10$ for a grand total of 22ish $ Canadian. I expected you would make a good profit but u looked at the prices on your website they are almost 200$... I mean I wish you all the best I hope you sell a lot but why not make something more simple like buying a bunch of the eBay parts for 22$ and putting them together and reeling for like 40$ you would make a good profit and sell way more.
Francis Towtruck they are now $94
I don't get it. I'm sure there is a way to put a dimmer on that circuit... Anyone??
It would be nice if there were separate fan and LED driver enable pins, that way a micro could turn on the fan and PWM the driver to control brightness. Or possibly a single enable line but with some turn off delay on the fan so that the PWM signal doesn't reach it.
price of these is a joke I built my own 2 years ago for around £20
100 Watts How many Lumens ?
Ruthvik S S about 130Lumen/W according to him..
its like 10000~~ i guess
Wtf was that last bit with the stick and tape lol. Lowers the presentation professionalism so hard
cost is wayyyyyyyyyyyyyyyyyyyyy to much.
I would like to make soe thing like this instagram.com/p/BSXqktvjicq/ for as a bicycle light. And i see that this one that is in the video is much lighter then the one that i have on Instagram. is there a wayto adjust the brightness?
I amusing a 150w boost converter to drive both of the 100w Led's but isnt at true full power.
pololu has some much better rc switches