Abandoned Sunday BMX Bike Restoration. (Satisfying)
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2021
- Found this abandoned and rusted out Sunday Soundwave BMX bike and I wanted to restore it. It took a bit of effort but the resulting bicycle transformation speaks for itself.
.
.
Hope you enjoy the video. Don't forget to Like, Subscribe and leave a Comment down below.
.
.
.
SUBSCRIBE HERE:
/ kamaarhkenn
.
.
FOLLOW ME ON INSTAGRAM :
/ 24140_arts
#bmx #diy #restoration - แนวปฏิบัติและการใช้ชีวิต
i love how youre working with what you have and you play it smart and wear golves and painting with an actual sprayer well going props mane
Much appreciated fam. Had to learn to do so much of that stuff but it was definitely worth it.
I need a BMX 😊❤
Dm me on Instagram. Link is in the video description
Amazing what you can do with elbow grease and basic tools. Well done man
Much appreciated man
Very inspiring. Thank you for the great content
Most welcome bud👊
God bless you that came out beautiful
Thank you so much 🙏😊
Cool slides bro
Thanks man 😅🙏
Nice sandals
Thank you
i love your shoes!!
Haha, thank you 🙏😅
Nice bro but the chair
I couldn't find a seat in time for the video. But the new owner had it replaced
That's some gangsta shit, paint stripping in socks and floral slides 😂
Hahaha, it's a wonder that I've never gotten any of that stuff on my feet during this process because that stuff burns.
Bro this... LOOK DAMM GOOD
Thank you 🙏
Looks great
Thank you
Great work!
Thank you so much 🙏
Nice restoration well done.
Why thank you 🙏
man, i love it!
Thanks man. I know you especially were waiting on these 😅😅
Abandoned Sunday???? Whoa
My guy🙌🏾🔥🔥
🙏🙏
Clean asf
Thank you 😊
Well done bro you're nice makes me wanna buy an old bmx😂
😅😅 You should. It feela good to bring these older bikes back to life and making them rideable once again
Skills
Much appreciated 🙏
very clean well done I just did a Sunday restoration too :)
Nice one man 👊
Bravo!!
Thanks
Keren
Nice colour scheme and paintjob man👏turned out beautiful, bought her right back to life:)
Love that front tyre too, never seen that tread pattern before. I wondered why you didn't mask off the inside BB and a couple other bits but I guess it doesn't matter so much.
They were masked off. I probably didn't show it on camera but those bits always get masked off because when you go to reinstall bearings they normally don't want to fit
Nice work brother 🔥🔥
Thanks man 👊👊
First dude that didn't spray The handlebar knurling. Doing it right
You never want to do that. The bars will always be moving
@@KamaarhKenn yep. I see it done in so many videos except yours. Bravo my friend
First base is good..
Yes
I recently fixed up my sisters old mongoose it’s a pretty decent bike considering how long it’s been sitting for, the cassette, chain and brakes were rusty so I had to do some work on it before it was up and running. The only problem with it is that it’s squeaky when I pedal, but overall a decent bike for what my sister got it for. 🤙🏾
I also have to mention that I picked up a random bike that someone decided to throw out off the street! It’s a kids bmx, it didn’t really need much just a wash, some lube, and a few adjustments before it was rideable. It is way smoother than my sisters mountain bike that’s for sure.
That's sick. At least you're making the best out of something that was once forgotten. For your sister's bike, try taking apart the cranks and grease metal on metal contact surfaces. Just a little bit of grease and then put it back together. It should help with the squeeky noise
I recently got thanks to your video! I managed to find a rusty subsin btwin bmx 20" (basically a wallmart bmx) for less than 10$ and now I rly want to invest in the restoration and modding of the bike! Do you have any advices for a beginner in modding?
Loved your videos ! Thanks for the amazing work!
Always make a list. Starting off with items that the bike needs like repairs or new parts, etc. Then follow up with what you would like to change or do on it. You'd rather have a crusty bike that works great than a clean bike that you hate to ride. A list also helps you budget and determine if a project is worth taking on or not. Some turn out to be money pits
Throw it in the trash. The total cost, will surpass the value, of getting a brand new one.
But have you seen it yourself? Or are you just commenting based on what you think this dude's bike looks like?
@@KamaarhKenn "wallmart BMX". What else do you want to see?
A homie building a bike he can use to move around and stay fit. He never stated he wanted to do trick on it
What did you use to remove the paint and rust? Love this video, inspires me to clear up my old BMX
Paint stripper and sand paper. For the rusty parts, a lot of sanding is required to get them cleaned up
Nice
Thanks 🙏🙏
Ride safe
Thanks man, I sure will
Nice job, what colors did you use?
Matt black and a metallic dark gray
Looking great were are you located
Nairobi, Kenya
Nairobi which place exactly
DM Instagram. Link is in the description
Me doa uma mn por favor🙏
Will you install a seat on it? If yes what color?
The new owner eventually got a black seat for it. It looks very nice and clean even after all this while
Travis scoot și You Like bmx
How much will u charge for a mint green colour on bmx
Shoot me a DM on Instagram. Link is in the video description
20inch ? Or 24inch?
It's a 20 inch
Which is cheaper to use, spray cans ama spray gun
They're more or less the same, but The compressor + gun combo I find much better for my use. Way more diversity for materials and colours
umetry electric spray gun before, inaeza kua a better option if mtu haezi manage kubuy compressor mzima
I have, though Kazi huwa nafanya inahitaji a stronger machine, plus the electric one doesn't give as fine a finish and neither does it have the adjustability of a conventional airbrush. It might work for someone else but not for me personally.
background music title plss
For which song exactly?
Considering every single bike nowadays is black or raw, and those bright colored Sundays are worth a lot, it probably would have been better to do up original, or just leave alone, wash it and give it a tune up, just maybe repaint sprocket cranks, and do whatever with the wheels, along with the obvious like seat changes
Out of all new school bikes excluding retro ones, those bright colored Sundays are worth some of the most money
They probably are, but this one was super beat up. And around where I'm from, all that most people know is that a bike with a small sprocket and cassette driver is a BMX Bike. Brands, names, colours and custom parts don't really matter. You could have a Panza custom 2 short complete but noone will pay the price for it even if they know what it is, all because of the market value for used bikes.
@@KamaarhKenn Assuming you don’t only sell it locally
In future probably, but at the moment it's mostly just giving the bikes new life. Since I can't keep all of them, I try to find colours that would appeal to potential buyers after the restorations and rebuilds are done. I do appreciate the heads up though, I had no idea that these older bikes were that valuable 😅.
@@KamaarhKenn I don’t think it would do much since I don’t somebody has the means or desire to restore it to stock , but since it will always technically be a Sunday Funday you could still try advertising it as one and put before and after pictures, maybe it’ll inspire somebody to buy it, even if it’s more just for the name, don’t ask me though
I hope to get bmx. Do you have one you don't want?
I'm not sure if we're in the same country code, the logistics would be crazy
Lol not a soundwave
What is it then?
@@KamaarhKenn pretty sure it’s a 2007 first wave
Okay, thanks
should kept it pink
Naah, it wouldn't have sold after I was done with it. And that's a big paper weight to have laying around