I cant wait to meet you flywheel films. Thanks to your videos, Ive finally bought my 99 miata and has been getting it ready for its first reunion! Cant wait to bd along for the ride!
NEW SIDE SPLITTER ALERT!!! I was tired of the NA ones on mine so I decided to find another set from another car and landed on Amazon s2000 ones. They are a bit longer but you can spilt the difference between front and rear. In my opinion they match nc3 front ends better with the factory lip.
Does the black interior get that much hotter than a lighter colored one? My sole purpose in life this winter is to try to figure out what Miata I want to buy. This channel really helps. Thanks.
Not much. Technically the light tan or grey interiors of NC2/3 would probably be a bit cooler, but I don't think there's much of a difference. Ceramic tint would help drastically. And black cloth would also be cooler!
Hello, what is the concrete type of bulbs needed to work as DRLs with smartflasher? You didnt mention it in the video nor in the modification list. I would like to use smartflasher and some LEDs for DRLs mainly.
Does it not worry you driving over the Rockies in a little RWD Miata in November? I’d love to go but 26 hours of driving for the round trip with no close social group for overnights, I can’t convince myself.
on the (rear) coilover adjusters I have (many) questions. in order of importance 1) would they work on Ohlins ? 2) are they stupidly expensive ? (like all the ones I have found for Ohlins so far) 3) who makes them? thanks.
I forget if you're still running the Super Q, but I was wondering if you could comment on how the exhaust sound changed with the turbo? Do you find that with the Super Q (assuming you're still using it) got significantly quieter? I'll be picking up the turbo the moment it goes on sale, and I'm wanting a slight bump in exhaust volume, so I am holding on on deciding between the Super Q and the Roadster Sport 2
I cant wait to meet you flywheel films. Thanks to your videos, Ive finally bought my 99 miata and has been getting it ready for its first reunion! Cant wait to bd along for the ride!
Have fun at the event! I wish I was able to go this year, but I couldn't make it happen. Looking forward to your content from Sonoma.
Will be there this year, first time. Driving up from San Diego in my white 99 NB1 on white Enkei Aeronautics (Tri-spoke fan blades) 😎👍🏼
You should go to the dealership and get a paint pen to touch up your rock chips
First time going to Miata reunion this year. Im driving my 2008 Galaxy Gray. See you soon!!
@@dennisthewalker what part of the Bay Area are you from? We should all start a Bay Area nc club
@@MaxRPMs San Mateo area
@@dennisthewalker oh cool I’m from Los Gatos
Driving down from Humboldt, unfortunately without my Kswap. See ya all there!!
I'll say hi at Reunion! Red NA with white door circles. Will Ghosty be at the FM booth? - Alden
See you later this week! I'll bein my NA this time.
Boy! How the back drop has changed!
NEW SIDE SPLITTER ALERT!!!
I was tired of the NA ones on mine so I decided to find another set from another car and landed on Amazon s2000 ones. They are a bit longer but you can spilt the difference between front and rear. In my opinion they match nc3 front ends better with the factory lip.
I have a black nc with the brown interior/top I’ll make sure to say hi if I run into you!
I’m super curious to see what you think of the sway bars as meister recommends stock sway bars. Also what bars did you get?
Does the black interior get that much hotter than a lighter colored one? My sole purpose in life this winter is to try to figure out what Miata I want to buy. This channel really helps. Thanks.
Not much. Technically the light tan or grey interiors of NC2/3 would probably be a bit cooler, but I don't think there's much of a difference. Ceramic tint would help drastically. And black cloth would also be cooler!
What type of pad are you using in the drivers seat?
Hi Jordan. Would love to see you again @ Miata Reunion. I drive the dolphin Grey NC 3.
what pedal covers are those? i can't find the install video for those or if there is one..
Hello, what is the concrete type of bulbs needed to work as DRLs with smartflasher? You didnt mention it in the video nor in the modification list. I would like to use smartflasher and some LEDs for DRLs mainly.
See you there! (23 RF)
Kinda bummed Friday is not at the track again (bc I am local ha ha) but whatever
Didn’t know your brothers were in town!
I'm driving down from Seattle in my grey/red top NC1 with number 8 on the side. Are you doing the HPDE? I'll be in B and A groups.
Does it not worry you driving over the Rockies in a little RWD Miata in November? I’d love to go but 26 hours of driving for the round trip with no close social group for overnights, I can’t convince myself.
BUILDINGS!!!! Move... wait, just drop top and get the best view in the world. Now you have more motivation to drive up mountains!
Hi Jordan, what's your wheel and tire sizes?
on the (rear) coilover adjusters I have (many) questions.
in order of importance
1) would they work on Ohlins ?
2) are they stupidly expensive ? (like all the ones I have found for Ohlins so far)
3) who makes them?
thanks.
They are specific to his brand (Miester R)
@@matkin05 thanks.
and phoooey!
I forget if you're still running the Super Q, but I was wondering if you could comment on how the exhaust sound changed with the turbo? Do you find that with the Super Q (assuming you're still using it) got significantly quieter? I'll be picking up the turbo the moment it goes on sale, and I'm wanting a slight bump in exhaust volume, so I am holding on on deciding between the Super Q and the Roadster Sport 2
No emblem turbo bro.. just keep it GHOSTly
your driving from denver?? damn haha. I was gonna drive my MSM up from LA but I think im flying. just too far with work before and after
useless late advice - you should have laid out blue painter's tape to get the alignment of the turbo badge set before putting the badge on
yap yap yap 😴