DIY 2003 2004 2005 2006 2007 Honda Accord V6 Replacing Alternator

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • Watch how to replace an alternator on a 2003 2004 2005 2006 2007 Honda Accord V6. #honda #hondaaccord
    Part & Tools Used:
    Honda Accord V6 Alternator - amzn.to/3Ha09fN
    10mm Socket - amzn.to/3ww9tIU
    14mm Socket - amzn.to/4dLOfaz
    12mm Socket - amzn.to/4bn25i8
    Extension - amzn.to/4bpZ4xu
    Flat Head - amzn.to/4aIHPXb
    14mm Wrench - amzn.to/3yq3hTk
    19mm Wrench - amzn.to/44WIv9V
    3/8 Wrench - amzn.to/4bGngLE

ความคิดเห็น • 46

  • @benchod3576
    @benchod3576 หลายเดือนก่อน +1

    I am about to install a new ac compressor on a 2005 Accord V6, and this video made it easy for me to remove the alternator. Cheers man and thank you.

  • @mrslow_ms3
    @mrslow_ms3 ปีที่แล้ว +7

    Just finished my wife’s 2007 accord and this video helped me do it in literally 30min tops Preciate it bro

    • @MobileCarMechanic
      @MobileCarMechanic  ปีที่แล้ว +1

      Glad it helped. Appreciate it.

    • @drayz9655
      @drayz9655 8 หลายเดือนก่อน

      Ur such a liar lol

    • @Drogas3653
      @Drogas3653 4 หลายเดือนก่อน

      Stop lying lol. You don’t even have a wife.

    • @mrslow_ms3
      @mrslow_ms3 4 หลายเดือนก่อน +1

      @@Drogas3653 😂😂😂😂 I’m guessing we’ve know each other all our lives 🤷🏾‍♂️🤷🏾‍♂️🤷🏾‍♂️🤷🏾‍♂️

  • @fragil7251
    @fragil7251 14 วันที่ผ่านมา

    Hahaha funny a year later this is the first video I clicked on to watch and I heard raining in the background and you have your tent…..and here I am with my blue tent from Walmart and guess what it’s raining here too🤩🤯🤯🤯🤯
    Anyway if you get this thanks for the time saving and great video introduction
    Keep it up

    • @MobileCarMechanic
      @MobileCarMechanic  13 วันที่ผ่านมา

      Haha how the turntables 😂 this was at the customer site and it sucked lol. Glad it helped! Cheers!

  • @bradlandry1789
    @bradlandry1789 15 วันที่ผ่านมา

    Thank you so much, we attempted to put a used alternator in but the bracket was missing and I don’t remember it having one but I saw your vid and it shows the bracket I can’t imagine where the dang bracket took off to 😢

    • @MobileCarMechanic
      @MobileCarMechanic  14 วันที่ผ่านมา

      That bracket is very important. Not sure why Honda designed it this way but it’s been this way even to present v6 Honda engines in other models.

  • @CodyLeon
    @CodyLeon 5 หลายเดือนก่อน +1

    Thank you sir this video was everything us DIYers needed

    • @MobileCarMechanic
      @MobileCarMechanic  5 หลายเดือนก่อน

      Glad our video was helpful. Cheers!

  • @zackzender2079
    @zackzender2079 ปีที่แล้ว +1

    Excellent. just changed my alternator after watching this. just damn alternator was gard to get it out after unscrewing it. thanks

    • @MobileCarMechanic
      @MobileCarMechanic  ปีที่แล้ว

      Glad our video helped! The tension is what makes it a pain but installing the new is way easier! Cheers!

  • @christopherolsen7984
    @christopherolsen7984 2 หลายเดือนก่อน +1

    Fantastic tutorial , great angles on your video made it easy to follow.

  • @willscanlan1077
    @willscanlan1077 4 หลายเดือนก่อน +2

    Thanx for the help man!! 🤝🏽 I get to go to work tm bc of you!! 💰💰

  • @MartinoGD67
    @MartinoGD67 หลายเดือนก่อน +1

    Excellent video..really help me get the idea and tips..Thanks so much😊

  • @chrisbelsito4231
    @chrisbelsito4231 5 หลายเดือนก่อน +1

    I’m gonna have to go to church after this job I think 😂😂😂 all because of the 14mm bolt lol… I just did valve cover gaskets will little to no cursing so I should be ok.. 😁
    Nice video man thanks

    • @MobileCarMechanic
      @MobileCarMechanic  5 หลายเดือนก่อน

      lol pray to the car gods. Wasn’t that bad honestly. I’d be hating life doing the gaskets haha. Cheers!

  • @johnnemeth7679
    @johnnemeth7679 11 หลายเดือนก่อน +2

    Thank you immensly, followed you to a t and it went smooooth....thanks again...

  • @rkr7372
    @rkr7372 ปีที่แล้ว +1

    This guys making it harder than it needs to be.

    • @MobileCarMechanic
      @MobileCarMechanic  ปีที่แล้ว +4

      Thanks! Didn’t know there was an easier way. Cheers!

  • @laviebanale
    @laviebanale ปีที่แล้ว +1

    Good video. I hope you can do one for new Honda (2013-2021) .

    • @MobileCarMechanic
      @MobileCarMechanic  ปีที่แล้ว

      Will do. Will post it in the near future. Thank you.

  • @IanBrady-e3i
    @IanBrady-e3i 2 หลายเดือนก่อน

    Where are the 2 lower bolts/ located on the alternator of the 2006 Honda accord euro

  • @marcof16
    @marcof16 3 หลายเดือนก่อน

    I’ll be doing this soon, prepping with your video. I’m almost positive my anger will spike with how tedious this task is. Gah, but thank you!

    • @MobileCarMechanic
      @MobileCarMechanic  3 หลายเดือนก่อน

      Good Luck, If you don't get angry are you really working on your car. Cheers!

  • @vladk4626
    @vladk4626 8 หลายเดือนก่อน +1

    Thanks a lot bro your video really helped me out 😎

  • @rkr7372
    @rkr7372 ปีที่แล้ว +1

    Jack the car up put it on a Jack stand, take the left front wheel off the inner fender well already has a hole you can get to everything on the bottom side, it works on civics also.

    • @MobileCarMechanic
      @MobileCarMechanic  ปีที่แล้ว +1

      Thanks for the tip. Had no idea honestly that it was that accessible.

    • @xcataclysmx
      @xcataclysmx 6 หลายเดือนก่อน

      also ford fusions with the 2.5L 😂

  • @andresmarquez5241
    @andresmarquez5241 3 หลายเดือนก่อน

    I can't get the alternator to fit inside the little mounting points it looks like the gasket inside expanded for something

    • @MobileCarMechanic
      @MobileCarMechanic  3 หลายเดือนก่อน

      Most likely the spacer/washer got pushed in. Take your bolt and screw it in the thread and give it some taps with a hammer to see if it goes in enough to fit back on to the bracket.

  • @IanBrady-e3i
    @IanBrady-e3i 2 หลายเดือนก่อน

    Problems with releasing the green clip for the alternator wire

    • @kccomeaux
      @kccomeaux หลายเดือนก่อน

      I’m having the same problem

  • @tbskirk
    @tbskirk ปีที่แล้ว +1

    My old Delphi alternator cracked like that on my 6th gen V6.
    It still works too but eventually the crack got bigger and bigger so I eventually replaced it.

    • @MobileCarMechanic
      @MobileCarMechanic  ปีที่แล้ว +1

      First time I've seen an alternator crack. Is this a common issue on the V6 Accord of this generation?

    • @tbskirk
      @tbskirk ปีที่แล้ว

      I don't know but my guess is it's something to do with the heat of The engine and age of the car

  • @zayrobledo4280
    @zayrobledo4280 3 หลายเดือนก่อน

    Is this a hybrid or no ?

    • @MobileCarMechanic
      @MobileCarMechanic  3 หลายเดือนก่อน

      It’s not, hybrid cars typically don’t have an alternator.