Awesome video! How would you compare the deep cleaning capabilities vs the Roomba S9 (specifically on carpet, crevasses, etc) from what you’ve seen so far??
We have both an Roomba S9+ and the S7MVU. The S9 is hands down a much better carpet vacuum. The single rubber-only brushroll on the S7MVU struggles with debris on medium-pile carpet in a way that the S9 never would. Too bad the S9 is a disaster in just about every other way possible - navigation issues, firmware issues, obstacle sensing issues, self-empty issues, etc. I've had to have 5 replacement S9s, and finally I just gave up, despite having the extended warranty. S7VMU is superior in just about every other way. I just wish it did better on carpet. It's passable, but at this price point, it should be mind-blowing, and it simply isn't in that regard.
@@Letmewatchsomevideos It's a brand new brush, so I'd hope it would work as well as it should. It does an acceptable job for the most part, but the aggressive double brush on the S9 is just better. So, from time to time I run the S9 for a deep cleaning.
thanks for the review!! i currently have the regular S7 and i love it! Regarding your setup of cleaning, i think that this is a smart way to work with it so you dont have a damp mop going over the ruggs. However, i know that you can also set the order of rooms that it cleans. That way you can do select all rooms and it will clean the rooms in the order you set so you dont have to turn it on again to mop to other ones. You can also customize the rooms which ones you want to have mopped and vacuumed and which ones only vacuumed.. Keep up with the good content!
Could you put a small sticker or something to cover only the camera and check if the AI avoidance still works with just the side sensors? (For us concerned about daily privacy).
Great Video, Adam. I was hoping you could cover the durability of the components in your upcoming review. I'm concerned about this model+base station needing more maintenance. If you could, please point out which components are easy to get replacements for and which components might be easy to install and replace. In particular, I'm worried about the mop cleaning brush in the base station. It looks like a lot of moving parts and I have not heard anything about replacement components. I know the vacuum brush and mop are replaceable, but what about the gearbox, motor assemblies (side spinning brush) and wheels?
I agree, this can be an expensive fix if the manufacturer doesnt provide spare parts. Would be an advantage for this channel to cover this aspect as no one else did
@AdamsTechReviews In the app are you not able to set a cleaning sequence? Like set this room to 1 this room to 2 and so on. So you will set your carpet rooms to 1,2,3 then the floors to 4,5,6. So it will always start with the carpet rooms first then move onto the floors. I'm testing out the Deepbot X1 Omni and the app has this feature so I thought it was pretty much standard on all apps. Another Issue I am having is that at the start of the cleaning sequence it will clean and wet the spin mop pads, even though it will start with the carpet rooms first. I sent them feedback to change the clean sequence so that it only wets & cleans at the start of clean sequence if it starts with a room that is to be mopped, then when its done with carpet area's will return to the dock to clean and wet the spin pads.
@@AdamsReviews Does the app let you set the cleaning level for each room. Like you can set a room to have a higher level of suction and higher level of water usage for mopping? For those rooms that are high traffic or are the dedicated pet area, a higher cleaning level would be needed.
@@mrannon Yes it does, you can set the cleaning sequence as well as the vacuuming/mopping strength level to the individual rooms/zones you set. I have it set to vacuum and mop at maximum over the zone where my toddler eats at his high chair, as well as around the kitchen island counter.
@@AdamsReviews Check under robot Settings > Manage Maps > Edit > Sequence. That's to set the order to handle. Edit: Noticed you're using Mi Home. Probably why. Try using Roborock's app and see if it's there too? I've never tried the Mi Home app on my end.
+1 on how it cleans carpets compared to the S9, would love to see side by side on mid plie carpet especially with embedded dirt. Is this in the same class? My S9 cleans carpet like an upright. When I run the s9 after my deebot t8, the S9 picks up more than the t8 does on the 1st run. It's that good.
Hi! Can you do a comparison between this and the dreame bot w10 please? Thank you! I need a new robot vaccum but not sure which to get of the two. The dreame w10 or wait for this to be released. Thank you!
What is the capacity of the clean water tank on the base station? And how much water does it use when it cleans the mop pad? I'm trying to figure out how long a tank of water will last me and these stats will help. You mentioned that the initial tank fill/clean used about a third of the base station's tank...if that's the case then I would have to refill the base station's clean water tank every 3 days...considering I run my S7 daily and use the full 300ml on-board tank each day. Thanks!
Can you please test it crossing over 18, 20 and 25cm barriers please? Considering it has an officially announced 20cm threshold. Also, will it ever get stuck while vacuuming extra deep carpet? My Neato D7 always did! Finally, can you please ask the manufacturer if there is a protection measure against it sucking water? If not, what needs to be fixed? My Neato died for good immediately after it sucked water from the shower area. That quick loss of investment hurts! Amazing work and thanks for the great first impression video, much appreciated!
I would like to know what is the minimum object height clearance needed for it to go under. I plan to make space under a closet door and a custom cabinet and need to know how much space is needed for clearance so that the vacuum will pass under something. Thank you.
@@AdamsReviews thanks, don’t know on the ultra, but in the past the firmware for the robots was different between the app, found this out when switched to the roborock app and told me needed a firmware update…
@@Me-fy4jc they have no different firmware updates cycle. I use MI home app because i have several other xiaomi devices. Other than that no advantage one over the other.
Roborock has a Robot Vaccum cleaning solution. Could you try that sometime and see how it works? Also if it has a good scent and how much cleaner you have to use each time? Thank you for this preview of things!!
Hi, I just bought S7 MaxV Ultra and when it goes to wash the mop. it docks then goes back, docks and goes back again and this happens 5 times and then it says unable to reach the dock. Anyone with same problem?
If I wanted to have 2 robot vacuums cleaning a space to speed up cleaning time (each vacuum cleans different rooms) what happens when this vacuum crosses paths with another vacuum? If I did this, this conflict might occur in hallways the vacs share to travel to rooms and the halls are around 3 feet wide. In other words, what happens when this vac meets another vacuum in a hallway and going towards each other? Does it manoover around a moving object that is coming towards it?
Also would like to know how long it takes to vacuum and mop a 1500 Sq foot area and if that can be done on one charge. I plan to use this to clean an Airbnb rental and only have about 4 hours of time to clean from when guests check out and new guests arrive.
Roborocks do about 1m2 per minute, my S7 has about 85% battery after 35m2 on balance mode. If you enable mopping it takes same time, then things change if you do 2x or 3x or if you do deep clean mopping with a closer Z pattern.
hmm. I have to do more test with this one. I was very very happy with the dreame w10 but it struggled some on my thick carpet. If you have only hard floors the w10 is a great choice. However it does not self empty the debris. To me thats more important than the mops cleaning their pads.
Is this intended to be the next version/upgrade from the Roborock S7+? Been curious when the next iteration would come out since that one is a few years old now.
@@me217 nope, have the regular S7 bagless (or yeah as they call it S7+). My point was that for 20 EUR on Aliexpress you can get 25 bags that you just need to pull off and throw in the trash, no cleaning, no dust flying, nothing. I used it without bag once and never went to that back again.
@@xeon2k8 for me, I prefer bagless. The dust doesn't bother me. I'll just blow it out with the air compressor in the shed. As I would always forget to order more bags.
@@me217 quite strange that in US the bagless is harder option to get or even the S7 was available first here in Europe bagless way before than in US, and here people barely have houses but apartments instead. I would be okay not using bags if i could you do what you mentioned.
They need to release this bad boy. I just bought the roborick S7+ but I guess I’m just renting it because it’s going to go back since this will be out soon.
Would love to see that tested in video as I have the same situation and I suffered with Neato D7 in the past getting stuck with less than the announced height threshold.
Great look at this new model, Adam. My only question on this particular run is how did it do with the chili stain in the kitchen? Oh one more, did it do more than just slightly dampen the carpet as it traversed room to room?
I prewet the chili so it got it up no problem. Just barely damp so no big deal. Now if it cleaned the entire room with the wet pad that may be different.
Hi Adam! Great movie! If you could answer the following questions here or in the next video, it would be great: 1. Can this robot "prewash" / "wet" the mop before washing? 2. Does this robot can dry somehow mop after mopping? 3. Can you check how will the garbage bag and auto empying function behave when it is quite full? Is there enough space under the lid for an almost full bag? i mean main station bag of course. 4. Can the spin speed be adjusted or the side brush can be switched off completely? 5. Can You throw some light on how washable dirt bag could looks like? 6. I know it's quite science fiction, but maybe you can check / compare the suction power between several robots by disassembling the brushes in them first (filming suction process with robots riding on a glass would be perfect but i know its some kind of wishful thinking and "nice to have" kind of test) Anyway thak You for all Your effort Adam! Best regards!
Opening intro audio is too damn loud compared to the recording of your voice. Apologies, one of my major pet peeves. p/s: You can set a priority order for the rooms you want to clean, that way, without further input, it can vacuum the carpeted rooms first without moping, followed by vacuuming and mopping the tiled areas. Check under robot Settings > Manage Maps > Edit > Sequence. That's to set the order to handle. Edit: Noticed you're using Mi Home. Probably why. Try using Roborock's app and see if it's there too? I've never tried the Mi Home app on my end.
@@AdamsReviews since the presentation of this robot in January I’ve been thinking the same thing, IRobot is sleeping. Nevertheless I have the s9 and the brava M6 and im thinking on selling it, but more reviews and comparisons are always welcomed to make the right decision. I’m from Portugal and parts for the iRobot are very easy to get on resellers or even iRobot.PT, but parts for the Roborock don’t seem to have a good distribution has iRobot, and the support is a mystery. Laser and camera seems to be way better than vslam with camera. I’m excited for the Roborock S7 MaxV I just hope the robot has a solid quality since the brand is Chinese and way cheeper than an IRobot.
@@xeon2k8 I would say that remains to be seen. How many Lidar bots have been in service every day for years without a hardware failure? And what happens if you do have a hardware issue? Is it repairable , or do you completely lose the investment? Early use of laser-guided systems from other manufacturers don’t seem to have a very good track record for longevity. Camera-based systems seem more durable (less parts).
@@2deparrish that doesnt contradict my comment tho, i talked about brands you are talking about technologies. Of course having a laser is having more moving parts, so there's a potential of more parts failing, that's up to you to decide if laser vs camera is worth for your particular usage or not. For reference iRobot was always bashed because of the navigation path, and quite the opposite for Roborock. Choices for everyone.
Awesome video! How would you compare the deep cleaning capabilities vs the Roomba S9 (specifically on carpet, crevasses, etc) from what you’ve seen so far??
We have both an Roomba S9+ and the S7MVU. The S9 is hands down a much better carpet vacuum. The single rubber-only brushroll on the S7MVU struggles with debris on medium-pile carpet in a way that the S9 never would. Too bad the S9 is a disaster in just about every other way possible - navigation issues, firmware issues, obstacle sensing issues, self-empty issues, etc. I've had to have 5 replacement S9s, and finally I just gave up, despite having the extended warranty. S7VMU is superior in just about every other way. I just wish it did better on carpet. It's passable, but at this price point, it should be mind-blowing, and it simply isn't in that regard.
@@AdrianLauf have you tried changing the brush ?
@@Letmewatchsomevideos It's a brand new brush, so I'd hope it would work as well as it should. It does an acceptable job for the most part, but the aggressive double brush on the S9 is just better. So, from time to time I run the S9 for a deep cleaning.
If it comes to the Netherlands then I would buy it. Or the deebot omni x1. I hope that you would test, review and compare the two.
Have you gotten a chance to put this up against the new ecovac? Not sure if you even have it yet. If so which do you think is better
I would have like to see if the carpet would be damp since it washes the pad before every run
Yes, you did it the right way. First carpets and then mopping hard floor 👍
Awesome, glad to see that they have it done and ready for testing.
What happens after the dust bin fills up? Does it empty then continue cleaning or does it fully clean even if it’s full then empty at the end?
thanks for the review!! i currently have the regular S7 and i love it! Regarding your setup of cleaning, i think that this is a smart way to work with it so you dont have a damp mop going over the ruggs. However, i know that you can also set the order of rooms that it cleans. That way you can do select all rooms and it will clean the rooms in the order you set so you dont have to turn it on again to mop to other ones. You can also customize the rooms which ones you want to have mopped and vacuumed and which ones only vacuumed.. Keep up with the good content!
Could you put a small sticker or something to cover only the camera and check if the AI avoidance still works with just the side sensors? (For us concerned about daily privacy).
Looks like an amazing machine, although I am not over keen on it’s appearance. It reminds me of a coffee machine/toilet!!
Great Video, Adam. I was hoping you could cover the durability of the components in your upcoming review. I'm concerned about this model+base station needing more maintenance. If you could, please point out which components are easy to get replacements for and which components might be easy to install and replace. In particular, I'm worried about the mop cleaning brush in the base station. It looks like a lot of moving parts and I have not heard anything about replacement components. I know the vacuum brush and mop are replaceable, but what about the gearbox, motor assemblies (side spinning brush) and wheels?
I agree, this can be an expensive fix if the manufacturer doesnt provide spare parts. Would be an advantage for this channel to cover this aspect as no one else did
How much open space is needed in front of the docking station for the vacume to enter and exit the station?
Good question
@AdamsTechReviews In the app are you not able to set a cleaning sequence? Like set this room to 1 this room to 2 and so on. So you will set your carpet rooms to 1,2,3 then the floors to 4,5,6. So it will always start with the carpet rooms first then move onto the floors. I'm testing out the Deepbot X1 Omni and the app has this feature so I thought it was pretty much standard on all apps. Another Issue I am having is that at the start of the cleaning sequence it will clean and wet the spin mop pads, even though it will start with the carpet rooms first. I sent them feedback to change the clean sequence so that it only wets & cleans at the start of clean sequence if it starts with a room that is to be mopped, then when its done with carpet area's will return to the dock to clean and wet the spin pads.
No, Unfortunately not as of now. I will tell them they need to add that.
@@AdamsReviews Does the app let you set the cleaning level for each room. Like you can set a room to have a higher level of suction and higher level of water usage for mopping? For those rooms that are high traffic or are the dedicated pet area, a higher cleaning level would be needed.
@@mrannon Yes it does, you can set the cleaning sequence as well as the vacuuming/mopping strength level to the individual rooms/zones you set.
I have it set to vacuum and mop at maximum over the zone where my toddler eats at his high chair, as well as around the kitchen island counter.
@@AdamsReviews Check under robot Settings > Manage Maps > Edit > Sequence. That's to set the order to handle.
Edit: Noticed you're using Mi Home. Probably why. Try using Roborock's app and see if it's there too? I've never tried the Mi Home app on my end.
Of course you can do the sequence, even my good old s5 max can do this..
+1 on how it cleans carpets compared to the S9, would love to see side by side on mid plie carpet especially with embedded dirt. Is this in the same class? My S9 cleans carpet like an upright. When I run the s9 after my deebot t8, the S9 picks up more than the t8 does on the 1st run. It's that good.
Hi! Can you do a comparison between this and the dreame bot w10 please? Thank you! I need a new robot vaccum but not sure which to get of the two. The dreame w10 or wait for this to be released. Thank you!
yes.... please! im waiting for the comparison between this two
What is the capacity of the clean water tank on the base station? And how much water does it use when it cleans the mop pad? I'm trying to figure out how long a tank of water will last me and these stats will help. You mentioned that the initial tank fill/clean used about a third of the base station's tank...if that's the case then I would have to refill the base station's clean water tank every 3 days...considering I run my S7 daily and use the full 300ml on-board tank each day. Thanks!
Can you please test it crossing over 18, 20 and 25cm barriers please? Considering it has an officially announced 20cm threshold.
Also, will it ever get stuck while vacuuming extra deep carpet? My Neato D7 always did!
Finally, can you please ask the manufacturer if there is a protection measure against it sucking water? If not, what needs to be fixed? My Neato died for good immediately after it sucked water from the shower area. That quick loss of investment hurts!
Amazing work and thanks for the great first impression video, much appreciated!
That vacuum looks badass
Hello Adam,
I would like to see the vibarise in action in full home clean mode.
I would like to know what is the minimum object height clearance needed for it to go under. I plan to make space under a closet door and a custom cabinet and need to know how much space is needed for clearance so that the vacuum will pass under something. Thank you.
Waiting for other tests
Will you get the Deebot X1? I would love to see comparison between these 2
I will try. Deebot is the only brand that has never messaged me or answered any emails.
Probably the most needed comparison as these two models currently are at the pinnacle
one question, do the mop pad smell after few days without washing?
The amount of rice left behind concerns me. I’m hoping they can improve that before release.
When you set it to vacuum and mop at the same time, does any liquid make it into the vacuum dirt bin?
No, But you dont want it to run over any puddles. It might be fine in mopping only mode since the vacuum wont be on and the roller wont be spinning.
@@AdamsReviews the roller spins all the time even when the vacuum is set to mop deep clean. Same as the side brush.
It sounds really loud in the video, how is it in real life?
Looking forward to full review! What App are you using, the Roborock app or the MI home app and why use one over the other (better/features/issues ?)
Mi home....I have just been using it since beginning. Not sure if any differences
@@AdamsReviews thanks, don’t know on the ultra, but in the past the firmware for the robots was different between the app, found this out when switched to the roborock app and told me needed a firmware update…
@@Me-fy4jc they have no different firmware updates cycle. I use MI home app because i have several other xiaomi devices. Other than that no advantage one over the other.
Can u do a comparison of the max ultra vs the g10s pro roborock. I’m trying to figure out their differences 😂
Roborock has a Robot Vaccum cleaning solution. Could you try that sometime and see how it works? Also if it has a good scent and how much cleaner you have to use each time? Thank you for this preview of things!!
Hi, I just bought S7 MaxV Ultra and when it goes to wash the mop. it docks then goes back, docks and goes back again and this happens 5 times and then it says unable to reach the dock. Anyone with same problem?
Do you have the newest firmware? is the dock in a good location and straight against the wall?
@@AdamsReviews yes, everything looks fine.
If I wanted to have 2 robot vacuums cleaning a space to speed up cleaning time (each vacuum cleans different rooms) what happens when this vacuum crosses paths with another vacuum? If I did this, this conflict might occur in hallways the vacs share to travel to rooms and the halls are around 3 feet wide. In other words, what happens when this vac meets another vacuum in a hallway and going towards each other? Does it manoover around a moving object that is coming towards it?
It has a "pet function", probably activating that might help, it'll probably just avoid each other.
Also would like to know how long it takes to vacuum and mop a 1500 Sq foot area and if that can be done on one charge. I plan to use this to clean an Airbnb rental and only have about 4 hours of time to clean from when guests check out and new guests arrive.
Roborocks do about 1m2 per minute, my S7 has about 85% battery after 35m2 on balance mode. If you enable mopping it takes same time, then things change if you do 2x or 3x or if you do deep clean mopping with a closer Z pattern.
I think a poop avoidance test would be great
Did you try the Max+ Vacuum power setting on the carpets? I noticed you didnt have that turned on on the first vacuum run
Not yet...will be in the review video.
Leaving one grain of rice is a big deal for me! Is that the way this cleaner cleans everytime by leaving some left overs?
Almost all robot vacuums would of left a little rice like this did. the only one that doesnt is the roomba s9+
@@AdamsReviews leaving debries on the carpet is something but on the hardwood is totally another story. BTW thank you for reply.
Which machine do you recommend for a house that has no carpet all vinyl floors? And 2 dogs- So mopping important
hmm. I have to do more test with this one. I was very very happy with the dreame w10 but it struggled some on my thick carpet. If you have only hard floors the w10 is a great choice. However it does not self empty the debris. To me thats more important than the mops cleaning their pads.
Is this intended to be the next version/upgrade from the Roborock S7+? Been curious when the next iteration would come out since that one is a few years old now.
the S7 came last year, what you talking about?
@@xeon2k8 no idea
I want one so bad. But I wish it had the bag less option like the plus
i have the bagless option, ended up using it with bags. way better money spent on bags than time cleaning the container and filters every time is full
@@xeon2k8 bagless in the ultra?
@@me217 nope, have the regular S7 bagless (or yeah as they call it S7+). My point was that for 20 EUR on Aliexpress you can get 25 bags that you just need to pull off and throw in the trash, no cleaning, no dust flying, nothing. I used it without bag once and never went to that back again.
@@xeon2k8 for me, I prefer bagless. The dust doesn't bother me. I'll just blow it out with the air compressor in the shed. As I would always forget to order more bags.
@@me217 quite strange that in US the bagless is harder option to get or even the S7 was available first here in Europe bagless way before than in US, and here people barely have houses but apartments instead. I would be okay not using bags if i could you do what you mentioned.
They need to release this bad boy. I just bought the roborick S7+ but I guess I’m just renting it because it’s going to go back since this will be out soon.
Yes should be a few more week. late march or early april from what I hear.
@@AdamsReviews thanks for the insight. I have been looking and couldn’t find any info.
I want it, super cool.
Great video!
I wonder how high thresholds it can pass. Live in an old building with high thresholds so not sure it can manage them.
2 cm high
@@xeon2k8 thanks :)
Would love to see that tested in video as I have the same situation and I suffered with Neato D7 in the past getting stuck with less than the announced height threshold.
Can you try the robot around sled base chairs?
I do not have any of those but if I can find one then yes.
Great look at this new model, Adam. My only question on this particular run is how did it do with the chili stain in the kitchen? Oh one more, did it do more than just slightly dampen the carpet as it traversed room to room?
I prewet the chili so it got it up no problem. Just barely damp so no big deal. Now if it cleaned the entire room with the wet pad that may be different.
@@AdamsReviews can you add Bona surface cleaner to the water, or a non-harsh cleaner??
@@sherefelbassiouny7515 Roborock has there one solution/detergent on there website for there mops. It’s very recent.
@@Freddy_Ventura thanks!
Does it vacuum much better than the S7?
I havent done any deep cleaning test yet...its supposed to have 5100pa suction so it should clean alot better.
Hi Adam! Great movie! If you could answer the following questions here or in the next video, it would be great:
1. Can this robot "prewash" / "wet" the mop before washing?
2. Does this robot can dry somehow mop after mopping?
3. Can you check how will the garbage bag and auto empying function behave when it is quite full? Is there enough space under the lid for an almost full bag? i mean main station bag of course.
4. Can the spin speed be adjusted or the side brush can be switched off completely?
5. Can You throw some light on how washable dirt bag could looks like?
6. I know it's quite science fiction, but maybe you can check / compare the suction power between several robots by disassembling the brushes in them first (filming suction process with robots riding on a glass would be perfect but i know its some kind of wishful thinking and "nice to have" kind of test)
Anyway thak You for all Your effort Adam!
Best regards!
Opening intro audio is too damn loud compared to the recording of your voice. Apologies, one of my major pet peeves.
p/s: You can set a priority order for the rooms you want to clean, that way, without further input, it can vacuum the carpeted rooms first without moping, followed by vacuuming and mopping the tiled areas. Check under robot Settings > Manage Maps > Edit > Sequence. That's to set the order to handle.
Edit: Noticed you're using Mi Home. Probably why. Try using Roborock's app and see if it's there too? I've never tried the Mi Home app on my end.
have the S7 using MI home app, sequence setting is there.
@@xeon2k8 Good to know. Interesting as to how the reviewer missed it out then.
Good video as always!
How will it do with Obstacle Avoidance?
That should be the next video on it.
@@AdamsReviews yeah!
I hate bags. Why is every self-empty a bag
🎉
You will destroy the pump if punpibg without water and only suck air
iRobot S9 vs roborock s7 maxv
Honestly I already like the s7+ better overall so its a no brainer. I have no idea what iRobot is doing by not coming out with something new.
@@AdamsReviews since the presentation of this robot in January I’ve been thinking the same thing, IRobot is sleeping.
Nevertheless I have the s9 and the brava M6 and im thinking on selling it, but more reviews and comparisons are always welcomed to make the right decision. I’m from Portugal and parts for the iRobot are very easy to get on resellers or even iRobot.PT, but parts for the Roborock don’t seem to have a good distribution has iRobot, and the support is a mystery.
Laser and camera seems to be way better than vslam with camera.
I’m excited for the Roborock S7 MaxV I just hope the robot has a solid quality since the brand is Chinese and way cheeper than an IRobot.
@@Freddy_Ventura it's not THAT cheap anymore and from the chinese brands is the best out there quality wise, also software wise.
@@xeon2k8 I would say that remains to be seen. How many Lidar bots have been in service every day for years without a hardware failure? And what happens if you do have a hardware issue? Is it repairable , or do you completely lose the investment? Early use of laser-guided systems from other manufacturers don’t seem to have a very good track record for longevity. Camera-based systems seem more durable (less parts).
@@2deparrish that doesnt contradict my comment tho, i talked about brands you are talking about technologies. Of course having a laser is having more moving parts, so there's a potential of more parts failing, that's up to you to decide if laser vs camera is worth for your particular usage or not. For reference iRobot was always bashed because of the navigation path, and quite the opposite for Roborock. Choices for everyone.
Lol, it didnt even clean you hous even though it took 50 minutes. My cheap thai cleaner does never miss anything