damaged RD6024 repair, replace XL7015

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ก.ย. 2024
  • Aliexpress:
    RK6006: www.aliexpress...
    RD6030 link: s.click.aliexp...
    RD6024: s.click.aliexp...
    RD6006P: s.click.aliexp...
    RD6012: s.click.aliexp...
    RD6012P: s.click.aliexp...
    RD6018: s.click.aliexp...
    Amazon store:
    RD6024/RD6024W: www.amazon.com...
    RD6024 110V US 1140W set: www.amazon.com...
    RD6018W+S800 case+1200W PSU: www.amazon.com...
    RD6012W+S800 case+800W PSU: www.amazon.com...
    RD6012PW+S800 case+800W PSU: www.amazon.com...
    RD6006W+S400 case+400W PSU: www.amazon.com...
    RD6006PW+S400 case+400W PSU: www.amazon.com...
    RK6006/RK6006-BT: www.amazon.com...
    RK6006-C: www.amazon.com...
    hello, in this video, we got a RD6024, XL7015 is burned, other chips are good, the problem is that this chips is burned badly, the connection points are damaged too, so that we need to add jump wire and put a new chip back, and notice that the pins cannot be shorted, the problem is easy to be found out, repairing needs patience, most repair is just to replace the damaged chip you see and it is ok
    If you have any questions , you can contact us in the way below:
    1.Contact us on Aliexpress directly
    2.Contact my email:1749808860@qq.com
    3.WhatsApp: +8615868147353
    4.WeChat: 15868147353

ความคิดเห็น • 8

  • @IvegaEletrônica
    @IvegaEletrônica 27 วันที่ผ่านมา +2

    Muito bom, bom trabalho

    • @rdtech9153
      @rdtech9153  24 วันที่ผ่านมา +1

      thank you for watching

  • @radekb9479
    @radekb9479 28 วันที่ผ่านมา +1

    Jako typowy Polak co lubi naprawiać a nie kupować nowe cenie sobie że jest możliwość naprawy tego sprzętu. Aczkolwiek się domyślam że jeśli popsuje się mikrokontroler który tym steruje to mogę zapomnieć o naprawie...😔

    • @rdtech9153
      @rdtech9153  27 วันที่ผ่านมา

      hello, yes if the micro-controller is damaged, it is very hard to repair, even replace a new one with program, the actual output is not accurate anymore,normally after replacing it, calibrate once, after installing the power board, it needs to be calibrated again

  • @kaboncho
    @kaboncho 29 วันที่ผ่านมา +2

    Buena reparación, video muy bueno. Gracias por enseñar su trabajo. ❤

    • @rdtech9153
      @rdtech9153  27 วันที่ผ่านมา

      you are welcome, if you have any needs, just contact us

  • @gbj265
    @gbj265 24 วันที่ผ่านมา +1

    • @rdtech9153
      @rdtech9153  24 วันที่ผ่านมา

      thank you