Part 2 I'm making and will have how to remove Keycaps and switches How to remove the screws What is inside Add art and different keycaps That's what I've thought of so far Add a comment if there is anything else you found challenging when you opened your hitpads out the box that you wish you knew how to do Thanks for watching subscribing and your comment
@@rushkiss2012 that I'm not sure I don't have a PS4 or PS3 there are modes on the pad for PS3 and PS4 and Xbox though As well as PS5 and Xbox series Thanks for watching subscribing and your comment
I bought the R16 and I am having a great time, thanks to your suggestion! The size is not too large for my small medium hands and the rings around the buttons do help stabilize the keycaps and prevent wobble. One issue I ran into was that one screw was over-tightened and the thread was stripped. Now onto customizing!
Nice!!! Love the R16 and I have seen an issue with the screws for me it was putting it back on but I had one of the release units For me I had to tighten and loose really slow which sounds like it shouldn't matter but it did and when I put back on I have to thread loose until it falls into place then tighten slow and if it gets stuck unloosen and little and retighten slow until done Weird I know but only 1 or 2 screws do this on mine Glad it helped Thanks for watching subscribing and your comment
I got my Haute42 a few months ago. G16, then bought Outemu Creme silent switches for it. After buying the Mayflash converter and doing the necessary firmware update, I can honestly say that this controller works like an absolute DREAM. No more finger/thumb pains, no worrying about transportation because it's not bulky in the slightest, and I had WAY too much fun picking out what design I wanted for the display screen. The only way I can even think of to make it better was if they had PCBs that work natively on current-gen consoles, eliminating the need for the converter dongles. Other than that, 10/10. I hope you enjoy your new controller, @DrJones694!!
@@BatBlud24 Thanks 🙏🏾 much appreciated I agree this style of play and these hitpads are so convenient and like you no more thumb pains or missed inputs I noticed a lot of folks get their pad and have no clue what to do next I hope this quick start guide helps folks that don't read the instructions... Myself included LoL get going quickly Thanks for watching subscribing and your comment
@@drjones694 I offended TheTrain's fragile ego with a stupid Fight Club joke and he muted me then banned me rofl. I doubt I'll ever be allowed back in. Just another Discord mod abusing their power to soothe their broken ego heh
That's a tough one He's a good guy I know moderating can be tough So much to keep on top of Hopefully it gets worked out and your back in soon Will have to keep the humor off the keyboard next time though lol I've been there before It happens
Hello, thanks for the video! What is that texture tape thingy you've applied to some buttons? Nevermind! You had them listed on the description of the video... My bad. :)
3:55 So I changed the colors for the buttons, and then if it is not for this part telling me how to switch to this self config color mode, how do I really know it? The instruction manual doesn't have it. Their website doesn't have it. Is it a "rely on TH-cam to do things" kind of world now?
Glad the video helped I tried to make this for folks that out the box were where you are and tried to make it short but still impactful Thanks for watching subscribing and your comment
very helpful guide. i enabled input history, but i only see the buttons light up, and not the inputs across the bottom, like in your video. Am i missing something?
No problem at 2:05 I was trying to say there are 2 types of adapters a Booter or an adapter like the XB3 This video will give you all the details th-cam.com/video/5o2sMdFxAFo/w-d-xo.htmlsi=F7QKGnr_-Jv-73TS
hello, great video like always buddy, my question is: does haute42 genuinely compatible with the ps4 but you need the usb booter for the ps5? saw someone said so about the R16.
Thanks much appreciated 🙏🏿 If your saying what I think you are I don't own a PS4 but the PS5 adapter says PS4 on it so I'm assuming you need the adapter for both consoles When you put the pad in that mode to get past the 8 minutes time out Hope that helps Thanks for watching subscribing and your comment
The web configurator does not work even when the pad is in web config mode AND it is also unresponsive when I follow the firmware update instructions. Switching modes, turbo, led and all other functions are working but my pc does not detect it(tried Xinput and Keyboard mode). Cool looking piece of desk lighting is all it is at this point.
Looks like you got it working Nice!!! Yeah all these USB c cables theses days really need a label on the connector like a number so you know what level you need to make different devices work Thanks for watching subscribing and your comment
Does putting the cable management clip on the haute pads make it difficult to do art swaps? I was wondering if i would have to replace the clip since ome would have to peel off the 3m tape every time it gets disassembled, no?
@@iroverice169 I've opened mine since on multiple pads and had no issues But on some I did The good thing about the clip pack I have in the description It came with 20 or 50 and the tape so I really didn't worry about it to be honest Hope that helps Thanks for watching subscribing and your comment
Hi sir, well i just got the haute pad today, i was excited to use once i pluged the booter5 nothing happened, i took a look at the usb port and i found the pins are defective, my question is that can i replace the usb port with another one or do i need a special one for it!?
@@mohamedseraoui7907 that's not good you want to go on the Discord for this one I have seen this topic a couple times in there But they have a good large group to possibly force lice support on a good day Don't post in general post in support channel Link is in the description Also I would recommend reaching out to the seller and trying to get a replacement 1st you shouldn't have that issue out the box Hope that helps Thanks for watching subscribing and your comment
Thats in the part 2 video I'm working on my advice is if you do not use your turbo button, which most people do not go to web config pin mapping press the pin viewer button go to that number change turbo to function repeat for profile 1 2 3 4 tabs save go to settings hotkey settings (last option on left) click the fn = function check box then for the next 4 options select Left Right Down Up Then for the drop down option on right pick load profile 1 ... 2 .. 3 ... 4 Save reboot now if you just hold the turbo button and press the direction keys it will which profile 1 2 3 4 on the fly Hope that makes sense and helps Thanks for watching subscribing and your comment
my advice is if you do not use your turbo button, which most people do not go to web config pin mapping press the pin viewer button go to that number change turbo to function repeat for profile 1 2 3 4 tabs save go to settings hotkey settings (last option on left) click the fn = function check box then for the next 4 options select Left Right Down Up Then for the drop down option on right pick load profile 1 ... 2 .. 3 ... 4 Save reboot now if you just hold the turbo button and press the directoin keys it will which profile 1 2 3 4 on the fly If this sounds confusing on yesterdays live stream I did this 2 or 3 times so you can follow along and set up the other features that I like. Fast forward maybe an hour or 2 you'll see me swapping from controller to desktop over and over that part Hope that makes sense and helps Thanks for watching subscribing and your comment
@@drjones694 oh is your thinking like, since a "pin" can be any gameplay button or tiny setting button, so why waste a gameplay button? So just make the tiny Turbo button to act as a Profile toggle?
Essentially yes The turbo is default but the function button is more valuable on the daily for most folks unless you use button turbo daily You can set color swapping easier with function button etc Something to think about
@@yogynuts I play on PS5 and Xbox But I have a link to the discord in the description They have a support channel not general Post there or search there and the community is really good and will some times depending on the day give live support Hope that helps Thanks for watching subscribing and your comment
can you explain me the all the differences between all the models? like, from the smallest to the biggest? i've seen G, T, P, R, S and B, but i still don't know what to buy... help me pls 😅
I ran into this weird issue, maybe you can help a bro out. I've been playing on my M12 Plus on my PS5 without issue using the Brook Wingman FGC. Further down the line I decided to get the Booter 5. Unfortunately using the booter in my pass-through port I am suddenly running into the issue that my M12 disconnects after 8 minutes.
@@Prince_of_Whatever make sure you pad is in PS5 mode not Xinput mode On the top left of your screen The Brooks adapter overrides that the booters need the pad to be in PS5 mode Did that fix it? Thanks for watching subscribing and your comment
@@drjones694 unfortunately that didn't fix it, I've always had my M12 Plus in PS5 mode. The booter is always blinking, maybe I need to update it? If so, I couldn't find anything regarding that myself. I just took it out of its packaging and plugged it in lol.
@@Prince_of_Whatever that's weird Also try a different better USB c cord That is super common as well the stock cord is cheap to save on costs I think Also join the Discord link in the description There is a support channel Post in there and you can usually get live support from the community Hope that helps Thanks for watching subscribing and your comment
unplug it and hold the button for xinput down then plug it back in let go after 2 seconds after connecting You will want to go to the web configurator Hold start and connect your controller to a laptop or ipad go to settings and change your start mode from Keyboard mode to Xinput mode Next go to boot modes in settings change the modes This sets what mode will the controller start in you held down the keyboard mode when you connected it and put it in keyboard mode happens all the time I have my B1 & B3 to PS5 B2 & B4 to Xbox One R1 & R2 to Xinput L1 & L2 to Nothing or xinput hope that helps Thanks for watching subscribing and your comment
I figured how to connect it to the website and switch it all to ps5 and saved it but when I tried to use it on my ps5 it dosent work I made sure it’s on ps5 mode but nothing happens but when I put it on key board mode it connects but still dosent work is there any way to fix this
When in ps5 mode and connected to your console You have to press home and press start to activate the controller And your all set Thanks for watching subscribing and your comment
I’m having trouble just getting the controller to work on ps5, I don’t care about the 8 minute time out rn. I will get an adaptor but first I want to KNOW that it works on pa5 and it’s just not connecting, is there any reason?
@@yumithehunter6292 check your screen and make sure it's in PS5 mode press home press start and it will work for 8 minutes Hope that helps Thanks for watching subscribing and your comment
@@giibson1323 I'm not sure what your asking me? Are you not able to connect? Make sure you are in PS5 mode and you press Home / PS and start Thanks for watching subscribing and your comment
My high 42 stays on PS4, Tekken 8 is a PS5 game it doesn't work on PS5 games, How to configure the high 42 on a pc? my high 42 does not give me software how in your great video to change to PS5
oh ok i think i understand what your saying You want to update your firmware to 0.7.10 The current latest version Your pad might have shipped with 0.7.7 firmware from the factory and you need the ps5 mode that comes on the newer firmware versions Step 1 here is a walk through video they make so you can update on a mac / windows / linux machine it's easier than you think takes less than 5 minutes to do th-cam.com/video/BEXVV9F2IMg/w-d-xo.html Step 2 Then you will want to go into the web configurator and set the start input mode to PS5 th-cam.com/video/9-CMH4BcNOU/w-d-xo.html Hope this helps
@@hajatianaandriamaro5355 Here are links to the templates I used The Haute42 discord has the files also under the resources channel Hope it helps Thanks for watching subscribing and your comment Haute42 Templates app.box.com/s/zk6pu6t1vkyeajm6xeuizl6d445gju79
Unfortunately they need to print out better instructions. The instructions I had didn't say anything about it having a Xbox mode.. I literally had to try every button in order to find it
@@NickRobTkd the firmware go2040 is being updated all the time the instructions may have been made before that mode was added Glad the video helped and points folks in the right direction They have so many great model options Thanks for watching subscribing and your comment
Part 2 I'm making and will have
how to remove Keycaps and switches
How to remove the screws
What is inside
Add art and different keycaps
That's what I've thought of so far
Add a comment if there is anything else you found challenging when you opened your hitpads out the box that you wish you knew how to do
Thanks for watching subscribing and your comment
Do I need an adapter for PS3 and PS4 use, or just for PS5 ?
@@rushkiss2012 that I'm not sure
I don't have a PS4 or PS3 there are modes on the pad for PS3 and PS4 and Xbox though
As well as PS5 and Xbox series
Thanks for watching subscribing and your comment
I bought the R16 and I am having a great time, thanks to your suggestion! The size is not too large for my small medium hands and the rings around the buttons do help stabilize the keycaps and prevent wobble. One issue I ran into was that one screw was over-tightened and the thread was stripped. Now onto customizing!
Nice!!!
Love the R16 and I have seen an issue with the screws for me it was putting it back on but I had one of the release units
For me I had to tighten and loose really slow which sounds like it shouldn't matter but it did and when I put back on I have to thread loose until it falls into place then tighten slow and if it gets stuck unloosen and little and retighten slow until done
Weird I know but only 1 or 2 screws do this on mine
Glad it helped
Thanks for watching subscribing and your comment
I got my Haute42 a few months ago. G16, then bought Outemu Creme silent switches for it. After buying the Mayflash converter and doing the necessary firmware update, I can honestly say that this controller works like an absolute DREAM. No more finger/thumb pains, no worrying about transportation because it's not bulky in the slightest, and I had WAY too much fun picking out what design I wanted for the display screen. The only way I can even think of to make it better was if they had PCBs that work natively on current-gen consoles, eliminating the need for the converter dongles. Other than that, 10/10. I hope you enjoy your new controller, @DrJones694!!
@@BatBlud24 Thanks 🙏🏾 much appreciated
I agree this style of play and these hitpads are so convenient and like you no more thumb pains or missed inputs
I noticed a lot of folks get their pad and have no clue what to do next
I hope this quick start guide helps folks that don't read the instructions...
Myself included LoL
get going quickly
Thanks for watching subscribing and your comment
I just want to say that I'll miss you and a few others from the Discord. Thanks for the help!
3nertia !!! Thanks much appreciated
What happened???
Why you leaving the Discord??? also
Thanks for subscribing watching and your comment
@@drjones694 I didn't leave voluntarily - I was banned lol
Wow what did you do?
Hopefully its for a limited time
And they let you back in
@@drjones694 I offended TheTrain's fragile ego with a stupid Fight Club joke and he muted me then banned me rofl. I doubt I'll ever be allowed back in. Just another Discord mod abusing their power to soothe their broken ego heh
That's a tough one
He's a good guy
I know moderating can be tough
So much to keep on top of
Hopefully it gets worked out and your back in soon
Will have to keep the humor off the keyboard next time though lol
I've been there before
It happens
Good guide didn't know about the directional change buttons
@@uptown2105 Thanks for watching subscribing and your comment
Great tutorial, thank you!
@@dreygun Thanks much appreciated 🙏🏿
Glad it helped
Thanks for watching subscribing and your comment
Hello, thanks for the video!
What is that texture tape thingy you've applied to some buttons?
Nevermind! You had them listed on the description of the video... My bad. :)
@@hivenoun7401 Thanks much appreciated 🙏🏿
Glad it helped
Thanks for watching subscribing and your comment
3:55 So I changed the colors for the buttons, and then if it is not for this part telling me how to switch to this self config color mode, how do I really know it? The instruction manual doesn't have it. Their website doesn't have it. Is it a "rely on TH-cam to do things" kind of world now?
Glad the video helped
I tried to make this for folks that out the box were where you are and tried to make it short but still impactful
Thanks for watching subscribing and your comment
awesome guide! I actually didn't know about input history and I've been using these things since January
Gabe!!! Thanks 🙏🏾 much appreciated
Glad it helped
Thanks for watching subscribing and your comment
very helpful guide. i enabled input history, but i only see the buttons light up, and not the inputs across the bottom, like in your video. Am i missing something?
figured it out. didn't see the save button at the bottom of the screen.
Glad it helped and you found it
Its a really nice feature
Thanks for watching subscribing and your comment
awesome guide! Thank you!
Thank you much appreciated
Hope Part 2 helps when it's done
Glad it helped
Thanks for watching subscribing and your comment
make a video how to make macros on haute42.
@@Pbsk85 good idea thanks
Thanks for watching subscribing and your comment
The website link for the configuration isn’t working is there a new one by any chance
The address is on the controller screen
when you unplug the power
hold start
and connect the power
Thanks for watching subscribing and your comment
Do you still need a booter or adapter like brook wingman xb3 to play fighting games using the hautepad on xbox series x? I'm a bit confused here.
No problem at 2:05 I was trying to say there are 2 types of adapters a Booter or an adapter like the XB3
This video will give you all the details
th-cam.com/video/5o2sMdFxAFo/w-d-xo.htmlsi=F7QKGnr_-Jv-73TS
hello, great video like always buddy, my question is: does haute42 genuinely compatible with the ps4 but you need the usb booter for the ps5? saw someone said so about the R16.
Thanks much appreciated 🙏🏿
If your saying what I think you are
I don't own a PS4 but the PS5 adapter says PS4 on it so I'm assuming you need the adapter for both consoles
When you put the pad in that mode to get past the 8 minutes time out
Hope that helps
Thanks for watching subscribing and your comment
The web configurator does not work even when the pad is in web config mode AND it is also unresponsive when I follow the firmware update instructions. Switching modes, turbo, led and all other functions are working but my pc does not detect it(tried Xinput and Keyboard mode). Cool looking piece of desk lighting is all it is at this point.
correction, make sure you are using the supplied USB-c cable or a compatible one. The one I was using works for other devices but not this pad.
Looks like you got it working
Nice!!!
Yeah all these USB c cables theses days really need a label on the connector like a number so you know what level you need to make different devices work
Thanks for watching subscribing and your comment
Nice vid brother
@@DrDraxFGC Drax!! Thanks 🙏🏾 much appreciated
Looking forward to seeing your Reina again
Thanks for watching subscribing and your comment
Does putting the cable management clip on the haute pads make it difficult to do art swaps? I was wondering if i would have to replace the clip since ome would have to peel off the 3m tape every time it gets disassembled, no?
@@iroverice169 I've opened mine since on multiple pads and had no issues
But on some I did
The good thing about the clip pack I have in the description
It came with 20 or 50 and the tape so I really didn't worry about it to be honest
Hope that helps
Thanks for watching subscribing and your comment
Hi sir, well i just got the haute pad today, i was excited to use once i pluged the booter5 nothing happened, i took a look at the usb port and i found the pins are defective, my question is that can i replace the usb port with another one or do i need a special one for it!?
@@mohamedseraoui7907 that's not good
you want to go on the Discord for this one
I have seen this topic a couple times in there
But they have a good large group to possibly force lice support on a good day
Don't post in general post in support channel
Link is in the description
Also I would recommend reaching out to the seller and trying to get a replacement 1st you shouldn't have that issue out the box
Hope that helps
Thanks for watching subscribing and your comment
Thnx alot for the response @@drjones694
I might have missed this but how do you change profiles
Thats in the part 2 video I'm working on
my advice is
if you do not use your turbo button, which most people do not
go to web config
pin mapping
press the pin viewer button
go to that number
change turbo to function
repeat for profile 1 2 3 4 tabs
save
go to settings
hotkey settings (last option on left)
click the fn = function check box
then for the next 4 options select
Left
Right
Down
Up
Then for the drop down option on right
pick
load profile 1
... 2
.. 3
... 4
Save
reboot
now if you just hold the turbo button and press the direction keys it will which profile 1 2 3 4 on the fly
Hope that makes sense and helps
Thanks for watching subscribing and your comment
do you know how to switch to profile 2 or profile 3 during gameplay after you set them? (the pin mapping profile 1 - 4)
my advice is
if you do not use your turbo button, which most people do not
go to web config
pin mapping
press the pin viewer button
go to that number
change turbo to function
repeat for profile 1 2 3 4 tabs
save
go to settings
hotkey settings (last option on left)
click the fn = function check box
then for the next 4 options select
Left
Right
Down
Up
Then for the drop down option on right
pick
load profile 1
... 2
.. 3
... 4
Save
reboot
now if you just hold the turbo button and press the directoin keys it will which profile 1 2 3 4 on the fly
If this sounds confusing on yesterdays live stream I did this 2 or 3 times so you can follow along and set up the other features that I like. Fast forward maybe an hour or 2 you'll see me swapping from controller to desktop over and over that part
Hope that makes sense and helps
Thanks for watching subscribing and your comment
@@drjones694 oh is your thinking like, since a "pin" can be any gameplay button or tiny setting button, so why waste a gameplay button? So just make the tiny Turbo button to act as a Profile toggle?
Essentially yes
The turbo is default but the function button is more valuable on the daily for most folks unless you use button turbo daily
You can set color swapping easier with function button etc
Something to think about
i just got my haute 42 u and im in xinput it registers the keys on the screen but guilty gear doesnt register them
@@yogynuts I play on PS5 and Xbox
But I have a link to the discord in the description
They have a support channel not general
Post there or search there and the community is really good and will some times depending on the day give live support
Hope that helps
Thanks for watching subscribing and your comment
@@drjones694 i got it to work idk why but worked after restarting my pc
can you explain me the all the differences between all the models? like, from the smallest to the biggest? i've seen G, T, P, R, S and B, but i still don't know what to buy... help me pls 😅
Sure can
Search DrJones694 VS and all my comparison videos will be there for you
Thanks for watching subscribing and your comment
I ran into this weird issue, maybe you can help a bro out. I've been playing on my M12 Plus on my PS5 without issue using the Brook Wingman FGC. Further down the line I decided to get the Booter 5. Unfortunately using the booter in my pass-through port I am suddenly running into the issue that my M12 disconnects after 8 minutes.
@@Prince_of_Whatever make sure you pad is in PS5 mode not Xinput mode
On the top left of your screen
The Brooks adapter overrides that the booters need the pad to be in PS5 mode
Did that fix it?
Thanks for watching subscribing and your comment
@@drjones694 unfortunately that didn't fix it, I've always had my M12 Plus in PS5 mode.
The booter is always blinking, maybe I need to update it? If so, I couldn't find anything regarding that myself. I just took it out of its packaging and plugged it in lol.
@@Prince_of_Whatever that's weird
Also try a different better USB c cord
That is super common as well the stock cord is cheap to save on costs I think
Also join the Discord link in the description
There is a support channel
Post in there and you can usually get live support from the community
Hope that helps
Thanks for watching subscribing and your comment
Thank you
@@brandonkaws no problem 🙏🏿
Glad it helped
Thanks for watching subscribing and your comment
There is Usb1 and Usb2 in S16, which port should I connect it on PC ?
both should work far as I know
Thanks for watching subscribing and your comment
my haute 42 suddenly switched to a mouse and a keyboard, Mind you I play on PC how do I fix it please I need quick reply.
unplug it and hold the button for xinput down then plug it back in
let go after 2 seconds after connecting
You will want to go to the web configurator
Hold start and connect your controller to a laptop or ipad
go to settings and change your start mode from Keyboard mode to Xinput mode
Next go to boot modes in settings
change the modes
This sets what mode will the controller start in
you held down the keyboard mode when you connected it and put it in keyboard mode happens all the time
I have my
B1 & B3 to PS5
B2 & B4 to Xbox One
R1 & R2 to Xinput
L1 & L2 to Nothing or xinput
hope that helps
Thanks for watching subscribing and your comment
@@drjones694 THANK YOU YOUR A LIFE SAVIER I SWEAR..
I figured how to connect it to the website and switch it all to ps5 and saved it but when I tried to use it on my ps5 it dosent work I made sure it’s on ps5 mode but nothing happens but when I put it on key board mode it connects but still dosent work is there any way to fix this
When in ps5 mode and connected to your console
You have to press home and press start to activate the controller
And your all set
Thanks for watching subscribing and your comment
I’m having trouble just getting the controller to work on ps5, I don’t care about the 8 minute time out rn. I will get an adaptor but first I want to KNOW that it works on pa5 and it’s just not connecting, is there any reason?
@@yumithehunter6292 check your screen and make sure it's in PS5 mode press home press start and it will work for 8 minutes
Hope that helps
Thanks for watching subscribing and your comment
🔥🔥🔥🔥🔥🔥
@@djrjboston Thanks 🙏🏾 much appreciated
Thanks for watching subscribing and your comment
Hello sir, I can't change the height 42 in PS5 why?
@@giibson1323 I'm not sure what your asking me?
Are you not able to connect?
Make sure you are in PS5 mode and you press Home / PS and start
Thanks for watching subscribing and your comment
My high 42 stays on PS4, Tekken 8 is a PS5 game it doesn't work on PS5 games, How to configure the high 42 on a pc? my high 42 does not give me software how in your great video to change to PS5
oh ok i think i understand what your saying
You want to update your firmware to 0.7.10
The current latest version
Your pad might have shipped with 0.7.7 firmware from the factory
and you need the ps5 mode that comes on the newer firmware versions
Step 1
here is a walk through video they make so you can update on a mac / windows / linux machine
it's easier than you think takes less than 5 minutes to do
th-cam.com/video/BEXVV9F2IMg/w-d-xo.html
Step 2
Then you will want to go into the web configurator and set the start input mode to PS5
th-cam.com/video/9-CMH4BcNOU/w-d-xo.html
Hope this helps
Yeaaaaah thx man it works you best
Yo man, I saw you also play Tekken?
Anyone knows where I can find S16 art template please ?
@@hajatianaandriamaro5355 Here are links to the templates I used
The Haute42 discord has the files also under the resources channel
Hope it helps
Thanks for watching subscribing and your comment
Haute42 Templates
app.box.com/s/zk6pu6t1vkyeajm6xeuizl6d445gju79
@@drjones694 thank you very much
Unfortunately they need to print out better instructions. The instructions I had didn't say anything about it having a Xbox mode.. I literally had to try every button in order to find it
@@NickRobTkd the firmware go2040 is being updated all the time the
instructions may have been made before that mode was added
Glad the video helped and points folks in the right direction
They have so many great model options
Thanks for watching subscribing and your comment