Looks fun 👍I have a sherco 250se too , it’s been a great bike. I’m not sure what jetting you are running , but I found the 2017 sherco jetting chart is a lot better than the 23 chart. I ended up getting a couple of different needles based on the 2017 chart , and jetted for my alltitude according to that chart. Runs way better. It’s overall too rich with the 23 chart and needles.
Jetting has been a constant issue, I'm not surprised you could hear how rich I'm running it 😂 I'll take a look at the '17 chart, seriously thank you for the tip, I'd love to have it blubber less on me. I'm running 162/38/G(?)middle + 1.5 turns on screw. You're right it's an awesome bike though.
I’m running 40 pilot 1-1/2 out with n8rw , clip 3 position, 165 main. At 5000 feet up to around 60 degrees . Once over 60 degrees I move to the n8rj 3 position . Piliot and main stay the same , just adjust air screw when needed. What’s your elevation?
For your elevation =40 pilot, 1.5 out on air screw , 170 main , n8rw clip 4 , or n8rh clip 4 . Depending on your temps. I would get those two needles, and give them a try . The 2017 chart was real close for me , I think I just went one down on the main jet , everything else was spot on.
Looks fun 👍I have a sherco 250se too , it’s been a great bike. I’m not sure what jetting you are running , but I found the 2017 sherco jetting chart is a lot better than the 23 chart. I ended up getting a couple of different needles based on the 2017 chart , and jetted for my alltitude according to that chart. Runs way better. It’s overall too rich with the 23 chart and needles.
Jetting has been a constant issue, I'm not surprised you could hear how rich I'm running it 😂
I'll take a look at the '17 chart, seriously thank you for the tip, I'd love to have it blubber less on me. I'm running 162/38/G(?)middle + 1.5 turns on screw.
You're right it's an awesome bike though.
I’m running 40 pilot 1-1/2 out with n8rw , clip 3 position, 165 main. At 5000 feet up to around 60 degrees . Once over 60 degrees I move to the n8rj 3 position . Piliot and main stay the same , just adjust air screw when needed. What’s your elevation?
@@frankthetank2824 elevation is always within the 300-700m range
For your elevation =40 pilot, 1.5 out on air screw , 170 main , n8rw clip 4 , or n8rh clip 4 . Depending on your temps. I would get those two needles, and give them a try . The 2017 chart was real close for me , I think I just went one down on the main jet , everything else was spot on.
Okay! Thank you so much for the tip! Hopefully the needle makes a difference. @@frankthetank2824