Yeah me too lol... Man the bass raider is my baby. About to do a couple tweaks to it. Jon boat mods are coming along. Hopefully will be on the water soon.
Congrats ! I had a 1542 bass tracker Jon boat and fished a lot on Lake Wylie with a 9.5 hp evinrude and it was a lot of fun. My cons on this particular boat was that 42” is not wide enough for me and it was tippy, and the 9.5 hp got us around but it was slow. Other than that it was fun, I had to sell it when we moved. I almost pulled the trigger on the bass raider last weekend but after talking with the wife I think after I pay my truck off I will get a 1448 too. I have watched all of SB fishing vids and I like the way his boat was done ! I look forward to your mods on the 1448, my two cents would be take your time and think it all the way through before you do it. I was in construction for 15 years and you know the saying measure twice cut once, sometimes I think we should measure more than that or you will be fixing more than finishing. Make good templates ! Good luck
Richard... you are absolutely right. I've never done so much research on a project in my life. Especially this one because I've never done this type of thing before. The Mods are coming along and I'm learning a ton along the way. Even when you think you've figured it out, you realized something else that changes your approach. All in all I'm loving the challenge and its making a great project while all is COVID stuff is happening.
Aren’t y’all the guys that were fishing out of a bass raider? I LOVE a 1448 Lowe but the rig/prep guys messed up. They mounted the winch at the top of it’s upright? They smoked some good shit that morning congrats on the rig!!
If you haven’t already, check out Tinboats.net. That site has forums on complete builds and modifications that will have you up all night saving ideas for your build.
@@BassBrothersFishingDMV I saw this model in person today, that 48 is SO much bigger than the 36. Man was is sweet. I'm 215lbs, plus wife and gear maybe dog, I might have to go that route.
I just bought the L1448M to replace my older Alumacraft 14 footer to use with my older Yamaha 25hp engine. Tried to put the plastic gas tank below the motor, but it would not fit! The space between the rear seat and the transom is too short. What are you using for a gas tank and where do you put it?
How do you like it so far? I just bought a new Lund 1448 that I’ll be putting a 25 merc on. The boat is literally a 14 foot tank. I’ve always had v-bottoms so I’m excited to see how stable it is. Picking it up this week. Tight lines bud. 👍🏼
does you boat come with the thicker aluminum hull .100" or more? do you know if thinner aluminum hulls are durable? I think the boat in this video is .072"
I’m trying to decide between a 1448 and a fishing kayak. My garage is 20’ I got 16 realistically. How long is it with a trailer and do I need a trailer or can I truck bed it? Thanks
This 1448 with the load rite trailer takes up about 18 feet without an outboard motor. Add a couple more feet with motor. You will need a trailer for this boat. It's pretty wide.
Yeah crazy huh. There are three really good reservoirs around here that have that restriction. I found out when I tried to put my Bass Raider on it lol.
@@BassBrothersFishingDMV awesome man that fits my budget. What about your trailer? Sorry for all the financial questions I’m just trying to make sure buying everything new is feasible for me. Thanks man!!!
The website tinboats.net has 100's (maybe 1000's) of mods others have done - lots of good ideas there Search for a guy named Bufford - he modified a flat bottom similar to this one 👍 Good luck - I've been working on a semi-v project - count on everything taking 4 times longer than you think it will!
Putting a motor and an anchor on a boat is NOT a modification. If your home is a crib then you must be a baby. Which means you are not even old enough to operate a boat.
This was a chill video. I'm not even in the market for a boat, but this was fun to watch.
Lol thanks. 👍🏾🤙🏾
Glad to see you kept the Raider. Looking forward to the mods on both boats. looking forward to getting your thoughts on the jon boat. Fish on!
Yeah me too lol... Man the bass raider is my baby. About to do a couple tweaks to it. Jon boat mods are coming along. Hopefully will be on the water soon.
Awesome! Perfect all around hunting, basin, catfishing boat :-). Congrats buddy!
Thanks Cruze.
Congrats ! I had a 1542 bass tracker Jon boat and fished a lot on Lake Wylie with a 9.5 hp evinrude and it was a lot of fun. My cons on this particular boat was that 42” is not wide enough for me and it was tippy, and the 9.5 hp got us around but it was slow. Other than that it was fun, I had to sell it when we moved. I almost pulled the trigger on the bass raider last weekend but after talking with the wife I think after I pay my truck off I will get a 1448 too.
I have watched all of SB fishing vids and I like the way his boat was done !
I look forward to your mods on the 1448, my two cents would be take your time and think it all the way through before you do it. I was in construction for 15 years and you know the saying measure twice cut once, sometimes I think we should measure more than that or you will be fixing more than finishing. Make good templates !
Good luck
Richard... you are absolutely right. I've never done so much research on a project in my life. Especially this one because I've never done this type of thing before. The Mods are coming along and I'm learning a ton along the way. Even when you think you've figured it out, you realized something else that changes your approach. All in all I'm loving the challenge and its making a great project while all is COVID stuff is happening.
was looking at a 1436 or a 1542 but I think I like this one more as a 1st boat for me. Maybe planing to upgrade in a few years to a 16 mod v.
The 1448 is a good wide body for stability. I think I might try a b mod too for my next jon boat.
Aren’t y’all the guys that were fishing out of a bass raider? I LOVE a 1448 Lowe but the rig/prep guys messed up. They mounted the winch at the top of it’s upright? They smoked some good shit that morning congrats on the rig!!
lol. wow... we still fish from the bass raider too
Just bought one of these , 1448MT 👍 Waiting for trailer to come in. Probably going to add a 9.9 outboard also.
Congrats on your new boat.
If I get another jon boat I think I'll try the MT.
Subscribed and watching your progress.
Thanks for subscribing. Appreciate the support. Mods a re coming along. Should have another vid up soon.
Heading from Virginia Beach to Ed’s Marine Superstore tomorrow to get my Lowe 1448 Mod V!
I'm jealous lol. That's awesome man. I would try a mod v if I was buying another boat. Good luck and congrats.
congrats. hope to see some modifications. I have a 12 footer that I am doing modifications to, and I have a bass raider 10e
Lol that's funny. We can't can't give up the bass raider. I already started the mods. Vids coming.
Thank you for your mistake that taught me a valuable lesson in mounting my trolling motor for the first time . 🎣
All good. It was a huge lesson on me lol.
nice boat.i am looking for the same thing right now for the up coming fishing season 🎣
Hope you find your boat. It's an awesome one
If you haven’t already, check out Tinboats.net. That site has forums on complete builds and modifications that will have you up all night saving ideas for your build.
Great info dude
I know you already did the build but I'd keep the live well. And for the pole holders. Do you like them?
I like the rod locker for sure. I spend allot less time prepping and getting the boat on the water with all the rods already on the boat.
Subbed. Just got the Lowe 1040. Looking forward to the mods.
Sorry I'm just seeing your comment Rick. Congrats on your new boat. Hope your enjoying the mods I've done on mine so far!!!! Enjoy your Lowe 1040.
Just started to look at Jon boats. Was thinking Jon or V type boat. This one is real nice. Good luck can't wait to see the mods!
Thanks John. Mods are coming along great. Enjoy the vids. Good luck choosing your boat
@@BassBrothersFishingDMV I saw this model in person today, that 48 is SO much bigger than the 36. Man was is sweet. I'm 215lbs, plus wife and gear maybe dog, I might have to go that route.
I bought a 1972 16 Starcraft for $400 and put a new 30 hp Suzuki on it.
I'm excited for you. My in law just gave me my 1st Jon boat. I'm excited
Awesome 👍🏾 🤙🏾 👌
I've never heard of a vessel size requirement. That's a new one on me
I know man. Boat must be at least 12 feet. Crazy.
I heard of HPlimits not length of the boat ???
Lowe makes great boats. Nice.
Yepp, price and quality is pretty good.
Nice! Can’t wait to see the mods, love fishing the Potomac 👍
Vabasser - Thanks. Hopefully you've been seeing the mod vids. Can't wait to get out on the Potomac myself.
New to your channel. Can’t wait to see what you did with this awesome boat.
Ah man. Welcome to the channel. There's a full playlist on this boat build. Enjoy!!!
I just bought the L1448M to replace my older Alumacraft 14 footer to use with my older Yamaha 25hp engine. Tried to put the plastic gas tank below the motor, but it would not fit! The space between the rear seat and the transom is too short. What are you using for a gas tank and where do you put it?
I have a 3 gallon tank I put behind the rear bench on the right hand side of the boat.
How do you like it so far? I just bought a new Lund 1448 that I’ll be putting a 25 merc on. The boat is literally a 14 foot tank. I’ve always had v-bottoms so I’m excited to see how stable it is. Picking it up this week. Tight lines bud. 👍🏼
Live the boat so far. Very stable which is why I got the flat bottom. Congrats on your new boat. Enjoy.
does you boat come with the thicker aluminum hull .100" or more? do you know if thinner aluminum hulls are durable? I think the boat in this video is .072"
Any reason you went with the flat front, rather than mod-v?. I've heard the second cuts waves better.
At the time stability was the most important factor for me. Now I would try a Mod V. That will probably be my next boat.
Congratulations.🥳👍🏻
Thanks dude.
Congrats..
Thanks John. Appreciate the support.
I’m trying to decide between a 1448 and a fishing kayak. My garage is 20’ I got 16 realistically. How long is it with a trailer and do I need a trailer or can I truck bed it? Thanks
This 1448 with the load rite trailer takes up about 18 feet without an outboard motor. Add a couple more feet with motor. You will need a trailer for this boat. It's pretty wide.
I’m on a mission now to get me a boat so I can hit the Potomac my guy
Yeah man. I gotta get out there. So much fishing available out there. Thanks for stopping by.
Love your videos
Thanks.
At 1st I thought you were "jumping the boat" on all of us Bass Raider owners! LOL Glad you are keeping it. Nice new boat though!👍
Nah lol... I love the Bass Raider. Will keep fishing on it. It's the perfect little boat.
Nice job boat
Thanks.
How much was it to do a build like this? Without the boat itself.
I haven't done a full tally yet but plan to put out a vid this winter on cost, supplies and tools to do a build like mine.
what's the make and model of the boat trailer?
Its a 14' Load Rite trailer.
Twelve foot minimum on the resivours ? Never heard of that.
Yeah crazy huh. There are three really good reservoirs around here that have that restriction. I found out when I tried to put my Bass Raider on it lol.
You came to my city... no meet up?!
I want the 1448M with a 9.9 4 stroke!
I interested in how the M runs. Let me know how stable and fast it goes
Should have got a modified V so the waves don't beat your ass
Next boat will be a mod V
If you dont mind how much was the boat? I am looking at a 1236 but dont have an idea of the price any info would be great thanks
Bought a tracker 1236 1,050 OTD
Edgar S did the come with the trailer
@@hennepinoutdoors2651 no. A trailer would have been 900 or so on top of that.
Edgar S ok thanks I looking to get one
My 1448 Mod V was $4000 Canadian
💪🏿💪🏿💪🏿💪🏿💪🏿💪🏿💪🏿💪🏿💪🏿
How much is the lowe 1448 going for? I’m trying to figure out if I should go with this boat or a cheap 14 footer from academy.
I think 2300 new
@@BassBrothersFishingDMV awesome man that fits my budget. What about your trailer? Sorry for all the financial questions I’m just trying to make sure buying everything new is feasible for me. Thanks man!!!
@@coreykinnamon2609 All good. I believe the trailer was around 800 or 900 new.
What does a 14/48 cost
The website tinboats.net has 100's (maybe 1000's) of mods others have done - lots of good ideas there
Search for a guy named Bufford - he modified a flat bottom similar to this one 👍
Good luck - I've been working on a semi-v project - count on everything taking 4 times longer than you think it will!
Thanks for the tips!
Did it come with the trailer ?
Nope. I wish but most dealers sell the trailer separately. I bought the trailer first then got the boat.
Bass Brothers Fishing DMV ok thank you I don’t want to buy a boat but not have a way to get it back home lol 😂
@@ryskyhighlights1327 lol. Right
I have this same boat..looking to get a Bimini top. Does anyone have recommendations?
check out tiny boat nation here on you tube You'll get alot of ideas from them
Absolutely. You're absolutely right. I think I've watched over 100 videos from TBNation and various other youtubers.
Putting a motor and an anchor on a boat is NOT a modification. If your home is a crib then you must be a baby. Which means you are not even old enough to operate a boat.
Your first sentence makes sense, and then you decided to make us cringe 😣
What in the hell are you talking about. Have you not seen the things this guy can do? Stfu