ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Quick video on How I fixed my pipeslice from Milwaukee.
Step 1. Undo the Torx screw on outer case.
Step 2. Push clip away from slice where the battery goes in you may need a small screwdriver flat
Step 3. Cover off and push 2 pins thru the motor shaft housing, small Allen key to push thru. Once u have them both out pull the gearbox and cutting assembly away.
Step 4. Unsolder the motor from the cable… top is red and is live + terminal.
Get yourself the correct motor I got mine from spare tool parts. £20 approx
Resolder and refit easy repair save the planet and keep it going.
Very skilled engineer, I've followed this chap for a couple of years and the guy can fix anything. I watched a video of him stripping down a rothenberger blow torch....most of us would literally just chuck that in the bin and buy another.
Appreciate that my friend.. I’m just curious by nature and wanted to show a simple motor change @ £20 saves a £100 tool from scrap. Appreciate the support 🙏🙏
@@drpipe I was at the Worcester Bosch training centre this time last year and even those guys were talking about your videos and what a good engineer you are.
He definitely has a unique set of skills, An out of the box thinker 💡 Excellent video & thanks for sharing !
Good to see you back.
👍🏼
I bought one,at 56 wanted to save my elbow( mild pain)
I don’t use it for 15mm, only 22. If I knew that it’s not good for 15, I wouldn’t of bothered.
I don’t have issues on 15mm 🤔
You can get the brushes rings from AliExpress . Takes a few weeks for delivery . Motors are crimped just have to bend the tags back . You can buy same Motor that are serviceable with removable brushes but the manufacturer choose to make the tools disposable .
Be great when you share the link with us ?
🤘😎🤘
I have often looked at these . What are your thoughts on owning one Doctor ?
worth the money etc
If ur an installer 👌🏻
I was the same and bit the bullet before Xmas, TBH not overly impressed with it so far and mainly use if for ripping out.......... Wouldn't buy another
@@julianhawker7672 Cheers 👍👍
@@k20aa personally i love mine and had no problems with it. Great for 28mm copper.
@@chocfinigan 👍👍
Do you have a model number/link for the motor?
Google’s ya friend
If your going to not make brushes available they should of used a brush less motor. They probably hope you'd junk it and buy a new one.