1/200 Heller Royal Louis

แชร์
ฝัง

ความคิดเห็น • 33

  • @brianfoley4328
    @brianfoley4328 5 หลายเดือนก่อน +1

    I've come back to this video because the quality is so good. This an excellent tutorial on how to build a high-quality plastic model ship and get a great looking model out of it. I like Heller kits, I've built several of them, they are fun and render good looking models. Everything about this build says "craftsmanship", I particularly enjoyed the shrouds and ratlines demonstration. Again, Thank You for such a great video...I admit I've copied several of your techniques and they worked for me (and I am not near the modeler).

    • @studionausia9513
      @studionausia9513  5 หลายเดือนก่อน

      I really appreciate your comment!

  • @PiperStart
    @PiperStart ปีที่แล้ว +1

    Wonderful model and very instructive video. This Heller kit of the Royal Louis seems to bring out the best in modeling. Très magnifique et un plaisir de le voir.

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว

      Actually, it's not an easy kit for me. but it seemed too exquisite and beautiful to give up in the middle. thank you a lot!

  • @mister_fjk1972
    @mister_fjk1972 ปีที่แล้ว +1

    Beautiful job here overall including the intricate rigging and the "stitched" sail effect!

  • @hannoschattauer6980
    @hannoschattauer6980 10 หลายเดือนก่อน +1

    😮 Ich bin beeindruckt von Deiner Hingabe, Geduld und Fleis! So entstehen Meisterwerke! Ganz große Klasse!❤

    • @studionausia9513
      @studionausia9513  10 หลายเดือนก่อน

      Yes, that really required a lot of patience, concentration, and challenge. despite that, I'm in the middle of building another one now. bigger and more complicated one. it seems kind of addiction. thank you!

  • @antoeknee4511
    @antoeknee4511 ปีที่แล้ว +2

    Excellent! The time you spent on the ratlines and the sails made the model all the more authentic. I am going to apply those two techniques on my Spanish Galleon. You did good!

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว +1

      Thank friend, though it was not easy for me to build it, the result looks not bad. Take your time to build it, enjoy it, and never give up. you will also have a good result.

  • @AlexModeling
    @AlexModeling ปีที่แล้ว

    Beautiful work! Really good vídeo build also! Enjoied it very much! Thank you for sharing this

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว

      Thank you for watching, thank you for comment!

  • @jamesfrost7465
    @jamesfrost7465 9 หลายเดือนก่อน +1

    Very nice mate. Good job. I ordered this model and a couple more from Heller, they should arrive later this month. I like the brown pre-shading on the sails, the way you set the deadeyes and flags blowing towards the front of the ship. (Not many people know to do that on a square rigged ship.) Movie models and special effects do it wrong a lot. Thank you for sharing.

    • @studionausia9513
      @studionausia9513  9 หลายเดือนก่อน +1

      It was a kind of challenge for me to finish this ship. but it gave me a lot of satisfaction. I hope that you will enjoy the process of building it. Thank you!

  • @brianfoley4328
    @brianfoley4328 ปีที่แล้ว +1

    Nicely done...

  • @davidrobinson4118
    @davidrobinson4118 ปีที่แล้ว +1

    Lovely work. I know how much time and effort you have to put in for this type of model. I'm only recently back into modelling and I'm just finishing the Revell 1/110 HMS Bounty. It's not perfect by any means but I'm pleased with it and learned a lot so my next effort should be better. I have in my stash the following - Heller 1/150 Le Glorieux, Heller 1/150 Amerigo Vespucci, Heller 1/200 L'indomptable and two Airfix 1/87 HMS Bounty's. These were a kind gift from a friend. Also from the Airfix Vintage Classics range the 1/130 Cutty Sark and the 1/180 HMS Victory. Not sure which one to tackle next. I will have a bit of a break from the dreaded rigging though and finish off one of my Tamiya tank dioramas and perhaps build one of my aircraft before taking a deep breath and launching, no pun intended, on another ship. Happy modelling my friend.

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว +1

      Wow! Thank you so much for such a long comment. Actually I spent almost 8 months building this ship. I hope to have more opportunity to build more ships like you. Have a good model life!

  • @JamesFrost74659
    @JamesFrost74659 4 หลายเดือนก่อน

    I have this kit, looking forward to building it. Good job.

  • @ferenckovacs2267
    @ferenckovacs2267 ปีที่แล้ว

    I also built this model when I was 12 and I'm 66 now. It is still on top of my bookshelf, next to the Vasa model.

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว

      Wow! 44 years ago! you must be a big fan of the model ship. I'm curious about Vasa model. is it a plastic model? or a wooden model? anyway, thank you!

    • @ferenckovacs2267
      @ferenckovacs2267 ปีที่แล้ว +1

      @@studionausia9513 The Wasa (Vasa) plastic model is an Airfix product. I bought it in Stockholm, in the Vasamuseet (Vasa Museum) in 2006. Even in my old age, I didn't give up on these pleasures :)

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว

      I know that kit. but I haven't built yet. I hope to build it someday. Buying some kits is always feeling good. Thanks for answering.

    • @ferenckovacs2267
      @ferenckovacs2267 ปีที่แล้ว

      @@studionausia9513 I'm going to retire soon, and then I'll try to build a wooden ship model. It's just hard to get access to a good plan.

  • @user-ri3ob1ro5o
    @user-ri3ob1ro5o 7 หลายเดือนก่อน

    SUPER 😮

  • @MsEliasc
    @MsEliasc 4 หลายเดือนก่อน

    ...Top!.........

  • @DavidRLentz
    @DavidRLentz ปีที่แล้ว

    Excellent job, overall. How long is the completed model overall, please?

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว +2

      I built this from May 2022 to Jan 2023. but I surmise the pure time was half of that. I deliberately built it slowly, but meticulously and elaborately step by step. The process was so tough that there was no step that just went smoothly. I've thought about giving up many times, but it's amazing that I overcame it at last. thank you!

    • @DavidRLentz
      @DavidRLentz ปีที่แล้ว

      @@studionausia9513 , I meant what is the length overall of the completed model, please?

    • @studionausia9513
      @studionausia9513  ปีที่แล้ว +1

      @@DavidRLentz Oh, my. I was mistaken. the overall length is 48cm. the height is 40cm.

    • @DavidRLentz
      @DavidRLentz ปีที่แล้ว

      @@studionausia9513 Thank you. Just under 19 inches, for those who prefer.