If you allow me few comments: [1] For those 2D static force calculations, I think it would be easier/faster to use Rectangular to Polar to obtain Magnitude and Angle, also saving to write on paper the X+Yj components. [2] Use of regression models for thermal decay is nice, even nicer to remind us all that Arithmetic and Geometric progression problems could be solved with regression models too - good catch - easier than modeling more complex summations. [3] I believe the solution on the exercise at t= 1:12:00 is inadequate, as it asks for the ‘difference in time’ from 20C to 25C, so it should be calculated as (30-25)X^ minus (30-20)X^ . [4] For the last exercise, you could convert HR (decimal hour) to HMS faster using that button (° ‘ “). Very nice and pleasurable to see your knowledge to solve exercise&practical problems! Signing to your channel right now. Thanks
Amazing series of exercises using an Engineering Calculator with these more modern built-in features. Obviously on a Sharp EL-W516 the kaystrokes would be different, but the exercises themselves are still valid. Thank you for sharing!
Engr thanks for this video. Matanong ko lang at timestamp 18:48, evaluation of limits, kung naka degree yung scical ko, 0 makukuha ko, kung naka rad naman, 1/2. alin po ba ang tama?
Hello po Engr. Paano po malalaman sa isang problem kong ano gagamitan sa mode na STAT. At kong kailan mo sya dapat gamitin. Ganun din po sa MODE na TABLE kailan mo malalaman kong sya ang gagamin mo. Thank you Engineer. Godbless!
Mode Stat po ay pang statistics na mga functions. Nakalagay po sa mode stat kung ano ang gagamitin. Kapag arithmetic series, linear function so Ax + B, kapag DE naman for example, exponential growth, exponential function po ang gagamitin, e^x
Maraming salamat Engr. Malaking tulong tong channel mo sa mga nagrereview! Talagang Prinoproblema ko kasi sa choices ng STAT na 1-8 kong ano/paano magagamit yung mga iba.
Hello sir??? Pa response namn po... Sir sa akin bago pang bili na fx 570 ES plus bakit ang delay pag e shift solve.. Anong gawin kopo nito sir ..thank you
Hi! After pressing shift solve lagay po kayo ng limit value for x. After nyo po mag shift solve, magtatanong sya ng value ng x, input po kayo ng value.
(shift+calc) is sya naghahanap/mag satisfy ng value of "x" and (calc) is ikaw mag set ng value of "x" and the calculator will solve the given equation itself.
Sir baka po pwd kaau mag lecture or tutor for ENGINEERING DATA ANALYSIS na kasali sa Math Topics for the new curriculum sa ece board exam po this oct 2022
Hello Sir, ideal po ba ang CASIO FX 82 MS/ES sa mga engineering students? Or would you also prefer CASIO 911 ES and/or CASIO 570 ES?. Thank you for your response sir❣️
*Timestamps*
2:58 Solving for Roots
6:08 Arithmetic Progression
11:12 Geometric Progression
13:37 Complex Problem (Complex Mode)
16:40 Limits (Calculus)
18:55 Matrix Problem
29:20 Diff Calculus
35:28 Slope of the Curve
36:40 Vector Analysis
42:02 Statics (Resultant)
46:19 Vectors (Intersect at a single point)
49:30 Statics (Resultant)
56:00 Differential Eqn (Decay, Pop. Growth, Newton's Law of Cooling)
Salamat Engineer. Laking tulong po hehe. Sana makapasa this upcoming Board exam for Mechanical Engineering sa August 2022
Habol pa sa aral 4days n lng. Salamat sa lahat ng free tutorials tulad nito. Thanks sa hard work mo sir
Hi! Goodluck sa exam. Thank you!💛
❤thanks sir
Sir thank you po dito ,napanood ko po to 2days before board exam. Now REE na po ako. Salamat po talaga
Congratulations!🧡
Salamat po talaga ng marami. Makakatulong ito sa akin sa March LET 2023
Goodluck sa po sa exam!🧡 #LPT2023
If you allow me few comments: [1] For those 2D static force calculations, I think it would be easier/faster to use Rectangular to Polar to obtain Magnitude and Angle, also saving to write on paper the X+Yj components.
[2] Use of regression models for thermal decay is nice, even nicer to remind us all that Arithmetic and Geometric progression problems could be solved with regression models too - good catch - easier than modeling more complex summations.
[3] I believe the solution on the exercise at t= 1:12:00 is inadequate, as it asks for the ‘difference in time’ from 20C to 25C, so it should be calculated as (30-25)X^ minus (30-20)X^ .
[4] For the last exercise, you could convert HR (decimal hour) to HMS faster using that button (° ‘ “).
Very nice and pleasurable to see your knowledge to solve exercise&practical problems!
Signing to your channel right now.
Thanks
Thank you sir!❤️
Salamat Engr! Nawa magamit ko at makapasa this Nove 2022 CE Board Exam
Salamat Kuys Engr. malaking tulong po ito sa akin! Keep safe and God bless u always! 😇🙏❤️
Thanks po Engr! MORE CALTECH TECHNIQUES VIDEOS ENGR! Dami ko pong natututunan.
Thank you po☺️ Ill upload more☺️
Thank you Sir for sharing your knowledge generously. God bless you with more as you become a blessing to other people.
Thank you po☺️
super big help esp for my upcoming pre board exam! thank you engr!
Thank you and goodluck future engr!❤️
Amazing series of exercises using an Engineering Calculator with these more modern built-in features. Obviously on a Sharp EL-W516 the kaystrokes would be different, but the exercises themselves are still valid.
Thank you for sharing!
Thank you sir sa mga videos mo about calculator techniques nakatulong po sa akin ngayon sa review ko, God bless you po palagi sir at ingat palagi🙏😇
Salamat din po sa suporta sa channel!♥️
you can also visit our fb page po.
facebook.com/engineerprofph
@@EngineerProfPH naka like and follow na po sir sa page😇
Thank you Engr.! dami ko natutunan
Thank you rin po!
Thank you for this vid tutorial. hope I pass the February ME Boards
where can i dm you?
Kumusta?
@@norman6843 hindi ko po nahanap name niya sa Feb passers po. 🥺
@@alchyign2308 try and try lang po. Ako ngayong august pa. 😊
Congrats
Napaka lupit neto sir, the best of the best
Thanks sir. Ang dami kong natutunan.
You're welcome po! Thank you❤️
Maraming salamat po Engr. God bless you
Good solution of maths
Can you apply this technique on canon f789sga. Thank you sir
tnx engineer sana more videos pa sir.
Thank you po☺️ Mag uupload pa po ako ng mas marami☺️
sana may calcu tech given ang combination of GP and AP. hehe salamat engr.
At 52:09 Sir, how did you determine the quadrant of F3? Since it was not stated in the given.
I humbly ask, and grateful of your response.
@@isaacharjohnlegados3939 he stated in the video at around 50:00 Maybe forgot to write it on the given problem.
Nice one, did not notice hahahaha
tutorial naman po sa caltech ng F-789SGA Canon. please po nalilito kasi ako eh magka iba kasi ng setup
Where to buy that kind of calculator sir?
Sa 1h41s po, hindi po ba dapat less than 90 years po ang magiging answer since 90% po ng substance ang na decompose na after 90 years?
Thankyou po Engr! ME na sana this august 2022
Engr thanks for this video. Matanong ko lang at timestamp 18:48, evaluation of limits, kung naka degree yung scical ko, 0 makukuha ko, kung naka rad naman, 1/2. alin po ba ang tama?
Hi po! Kung ito po ay trigo functions, dapat naka rad po. Yung naka rad po ang tama.
Big help master, salamat 👌
Thank you so much engr.
galing thank u po
THANK YOU SO MUCH SIR♥️♥️♥️♥️♥️
thank you po Engr.
Solid 🔥
Thanks sir ,pwede din po ba ito sa mga math major?
Hi! Yes pwede po. Feel free to share to your fellow math majors. Thank you!❤️🫶
@@EngineerProfPH ty po sir 😅😅😄
Sir pwede po ba yan ma gamit para sa master plumber na examination ganyan na calcu po?
Hi! Yes pwede☺️
Thank you, Engr!
Youre welcome po☺️
50:05 paano po nalaman na sa 4th quadrant yung F3=200N,60°?
18:17 diba dapat 0 ang answer jan ? kasi dapat closest to 0 yung x .. dapat 0.0000001 gamitin ..
thank po sna po wag masyado mbilis pra masundan po nmin ng maayos..thnks po
Hello po Engr. Paano po malalaman sa isang problem kong ano gagamitan sa mode na STAT.
At kong kailan mo sya dapat gamitin. Ganun din po sa MODE na TABLE kailan mo malalaman kong sya ang gagamin mo. Thank you Engineer. Godbless!
Mode Stat po ay pang statistics na mga functions. Nakalagay po sa mode stat kung ano ang gagamitin. Kapag arithmetic series, linear function so Ax + B, kapag DE naman for example, exponential growth, exponential function po ang gagamitin, e^x
Mainly, pang statistics po ang Mode Stat, like finding mean, standard deviation, variance, probability under normal distribution curve
Maraming salamat Engr. Malaking tulong tong channel mo sa mga nagrereview! Talagang Prinoproblema ko kasi sa choices ng STAT na 1-8 kong ano/paano magagamit yung mga iba.
Hello sir??? Pa response namn po...
Sir sa akin bago pang bili na fx 570 ES plus bakit ang delay pag e shift solve..
Anong gawin kopo nito sir ..thank you
Hi! After pressing shift solve lagay po kayo ng limit value for x. After nyo po mag shift solve, magtatanong sya ng value ng x, input po kayo ng value.
@@EngineerProfPH Mabagal pa rin po kahit may limit :( 2nd edition fx 570ES plus po
Meron po ba kayong video, z transform calcu tech?
-8:04 "its a trap" 😂😂
Wala lang natawa ako 😁
HAHAHA Thank you sa support sa channel ma dude!🧡🧡🧡
May konting correction lang about sa half life. 10% na lang yung amount ng substance after 90yrs. So the data should be 0.1, not 0.9. 😁
ambilis po ng pagcompute ng calculator nyo, nacut na po bayan engr?
Thank you po Engr. Ask ko lng po allowed ba FX991 es plus 2nd edition sa EE board. This is my 2nd time to buy calc.
Allowed po yung 2nd edition ng 570 es plus in board exam?
Hi! Yes po allowed.☺️
Maraming salamat engineer 👷🏻
Hello sir, just recently bought a calculator with shift solve function. Ask ko lang po sana anong kaibahan pag "shift+CALC" sa "CALC" lang?
(shift+calc) is sya naghahanap/mag satisfy ng value of "x" and (calc) is ikaw mag set ng value of "x" and the calculator will solve the given equation itself.
Isa pang video paano ginagamit paano siya pindutin para maging ganoon
Sir baka po pwd kaau mag lecture or tutor for ENGINEERING DATA ANALYSIS na kasali sa Math Topics for the new curriculum sa ece board exam po this oct 2022
sa statics po pano nyo po nalaman kung sa q4 yung F3 kung di po naka indicate?
Thank you sirrr
Paano po yung summation na sign kapag nasa stat na mode sa canon f789sga?
💖💖
Lodi pide cal tech sa canon 789sga. Lahat na kaya niya magawa. Pang bala ng armas sa nov 2021 CE board exam. Pls po bossing
Thank you so much sir
Pano yung sum of the odd numbers from 1 to 61 using f 789sga?
same question
Sa Growth & Decay hindi po ba 1-0.9?
Pwedi ba yan sa civil board exam ganyan na calculator sir?
Engr, what if First and last term ang given sa geometric progression, pano po isolve iyon sa calculator 😅...
Thank you sir
Thank you po sir Let po ako
Thank you and goodluck po sa LET maam!🫶
love from nepal
Hello Sir, ideal po ba ang CASIO FX 82 MS/ES sa mga engineering students? Or would you also prefer CASIO 911 ES and/or CASIO 570 ES?. Thank you for your response sir❣️
Hi! I prefer Casio fx-570 es plus or Casio fx-991 es plus for engineering students.☺️
@@EngineerProfPH thank you po😊very grateful poko na nahanap ko page nyo and channel, very useful♥️God Bless po Engr!
Hi Engr. Pano po mag summation sa Canon F-789SGA? Thank you :)
Apps then 2
Sir paano po i apply pag calculator po is casio 570ms syntax error po
Hindi na po ba need ng solutions sa board exam?
Hi sir, ano pong best recommended na calculator for engineering students?
Hi! Use Casio fx570 es plus 2nd Ed.☺️
Hello sir, pwd po ba kayo mag tutor sakin.. Please reply po. Thank you
Hi, pls message my Facebook Page po. facebook.com/engineerprofph
@@EngineerProfPH thank you po sir ☺ ❤️
Sir paano po pag fx570ms
Sa 2nd problem bakit 15.85 po lumalabas sa akin hehehe
Hello sir engr. allowed po ba yang calculator sa CE board?
Hi! Hindi po but this is almost has the same features as Olympia 570 es plus which is allowed in the CE Board.
Thank you so much po😊
wala ng summation sa bagon calc
Sir pwedi b ako patulong sayo matagal n kc ako graduate 1991 p. May trabaho n ako at family. Tnx sir
In india we aren't even allowed to use calculator
can't understand the guy...