Hey do you think you can make another video showing the carb and all its hose hook ups, I have one and there isnt a single video on youtube about that specific carb.
The stock wheels are large bell, 10" x 8", 4/110mm bolt pattern, and a 3" backspace (3+5). www.google.com/aclk?sa=l&ai=DChcSEwitjaDJ19b1AhWVjcgKHVw4DCkYABABGgJxdQ&ae=1&sig=AOD64_2t5yjOgPsfjg2goQtR77FKemtJ2w&ctype=5&q=&ved=0ahUKEwjNpZjJ19b1AhWpg3IEHYvuDRoQww8IlQs&adurl=www.chapmoto.com/ams-large-bell-design-steel-wheel.html%3Fsku%3DP0231-0002%26gclid%3DCj0KCQiA6NOPBhCPARIsAHAy2zAxecKIr2xAWwubjkAkOh-oJ64gzpnG5tNIgBIVSFQ6ICTKiSlo5GUaAlSGEALw_wcB You can run a 12" wheel, which will clear the brake caliper, as long as the bolt pattern & backspacing is correct.
@@rimi_9462 Sorry, I was talking about the rear. The fronts are 10" x 5", 4/110mm, and here's where I'm confused. When I measure them, I'm pretty sure they have no offset. Centered. If anything, maybe a bit less on the outside/valve side. Which would make it 3" backspace. (3+2) But a 2" (2+3) backspacing would be what I'd go with. If I was wrong, the front would only be wider by 2" www.google.com/aclk?sa=l&ai=DChcSEwitjaDJ19b1AhWVjcgKHVw4DCkYABAFGgJxdQ&ae=1&sig=AOD64_3iiXieITb7Kx9AcFRLiTDZG5F98w&ctype=5&q=&ved=0ahUKEwjNpZjJ19b1AhWpg3IEHYvuDRoQww8Imgs&adurl=www.chapmoto.com/ams-steel-wheel.html%3Fsku%3DP0231-0001%26gclid%3DCj0KCQiA6NOPBhCPARIsAHAy2zCDMMHzEzvpSci6L8DcY0bxRT7ayyDMvpPky9-zhtrmgNhFM2GHctgaAtrTEALw_wcB
Lmao i just typed on the searsh bar and i found this video 😂
what does the button above the ignition do?
Hi! I would like to know if you sold the car to anyone?
Hey do you think you can make another video showing the carb and all its hose hook ups, I have one and there isnt a single video on youtube about that specific carb.
what does the button above the ignition do?
Wheels for gsmoon ??
The stock wheels are large bell, 10" x 8", 4/110mm bolt pattern, and a 3" backspace (3+5). www.google.com/aclk?sa=l&ai=DChcSEwitjaDJ19b1AhWVjcgKHVw4DCkYABABGgJxdQ&ae=1&sig=AOD64_2t5yjOgPsfjg2goQtR77FKemtJ2w&ctype=5&q=&ved=0ahUKEwjNpZjJ19b1AhWpg3IEHYvuDRoQww8IlQs&adurl=www.chapmoto.com/ams-large-bell-design-steel-wheel.html%3Fsku%3DP0231-0002%26gclid%3DCj0KCQiA6NOPBhCPARIsAHAy2zAxecKIr2xAWwubjkAkOh-oJ64gzpnG5tNIgBIVSFQ6ICTKiSlo5GUaAlSGEALw_wcB You can run a 12" wheel, which will clear the brake caliper, as long as the bolt pattern & backspacing is correct.
@@kartingkaos5028 and back ?
@@rimi_9462 Sorry, I was talking about the rear. The fronts are 10" x 5", 4/110mm, and here's where I'm confused. When I measure them, I'm pretty sure they have no offset. Centered. If anything, maybe a bit less on the outside/valve side. Which would make it 3" backspace. (3+2) But a 2" (2+3) backspacing would be what I'd go with. If I was wrong, the front would only be wider by 2" www.google.com/aclk?sa=l&ai=DChcSEwitjaDJ19b1AhWVjcgKHVw4DCkYABAFGgJxdQ&ae=1&sig=AOD64_3iiXieITb7Kx9AcFRLiTDZG5F98w&ctype=5&q=&ved=0ahUKEwjNpZjJ19b1AhWpg3IEHYvuDRoQww8Imgs&adurl=www.chapmoto.com/ams-steel-wheel.html%3Fsku%3DP0231-0001%26gclid%3DCj0KCQiA6NOPBhCPARIsAHAy2zCDMMHzEzvpSci6L8DcY0bxRT7ayyDMvpPky9-zhtrmgNhFM2GHctgaAtrTEALw_wcB