Do not fit h7 led into these specific lights they start bubbling the chrome reflector when on. I installed novsight h7 mini and we're only on for 2 miles and they ruined my refectors, installing these cost me £566 quid for a new pair of headlights on my 2019 st line x
You mention at 0:18 that the Fog light bulbs are H8, but do not show how to get to them and replace them. Also the main beam bulb (not high beam) I have in my European 2019 Ford Focus New does not look like the bulb you pulled out, so neither does the harness/connector.
Hi, sorry it was a rental car and I didnt have many tools and didnt wanted to break anything. Please check the bulb before buying as there can be differences. Thanks
@@davidboyd267 hi, you need remove the headlights to acess the fog light , you need a torx T30 and small screwdriver to remove de plastic pin , under the headlighits you can acess to the fog lights
@@Mckauto procura por adaptadores h1 e h7 no aliexpress , há uns grampos de metal ou plastico para fixar os leds comforme a marca de modelo do carro para as h1 vais precisar também de um cabo adaptador de 2 pinos para 1 pino, para h1 recomendo leds 360
Hi. I'm collecting my new Focus ST line X at the end of the month. I watched your video with great interest. Do you have to fit anything else to the bulb's? Such as the "Warning Resistor Decoder Anti Flicker" or do you just fit them. Thanks, Malc
Hi! Focus 2019 owner here. Did You found already some decent LED H7 adaptors? I have one set of Ultineon 9000Pro LED H7 but not able to fit them into the lamp... Apreciate any help. Cheers!
@@Mckauto I used a pair of long nosed, pin nosed pliers. I got the jaws onto the plastic lugs and gradually increased turning force until the joint gave. It's very awkward to see but when you manage to get it, put a smear of petroleim or silicone grease on the male thread and into the plastic female thread before reassembly. Just like a water tap, don't turn it home fully hard and leave it but back it of a couple of degrees and it won't seize again.
Hi, I am currently trying to replace h7 bulbs but the led light narva h7 which I bought they don't fit. Do you know how I can I get them to fit cause I am looking for a solution a while now and I am pretty disappointed
Hi, each car has its specifics and might require adapters, I was struggling honestly with this Focus as the lug was on other side and I couldnt slot them. Im still trying to find alternative to be honest. Please try some Ford forums, they might have some solution by now. Thanks
I have a few questions I hope you or someone in the comments can answer. I own a MK4 Focus ST-Line and am currently considering replacing the standard halogen headlights for the OEM LED headlights (not the iLED), as that's an option that is missing on my car and I would love to have. My question is, if it is at all possible, are the headlights plug and play or does it require coding of some sort? Also, I have a pair of PY21W LED indicators that I bought for my MK3 Mégane, very similar to the ones you have. Unfortunately they didn't work properly as the bulbs don't have a resistor, which causes the common hyperflashing issue. I know the Focus has a CAN bus system, but I don't know if that would solve the problem. Kind regards from Portugal!
Hi the first part not sure, the second about PY21W you need bulbs with minimum 1A CanBus current: amzn.to/2HhSmNy amzn.to/2UNTa4Q Any of these 2 - sometimes some of them not in stock but I will get more. Thanks
@@Mckauto I gave them a shot and surely they didn't work. They were a pair of relatively cheap LED bulbs from Amazon, they don't draw much power at all. The car thinks the bulb is shot and it hyperflashes. I'll look into getting one of yours. Thanks!
@@mikerelvas Thanks, I always carry 3 types of bulbs for testing - 0.5A, 1A and the fat ones are 2.7A but need to check diameter if they will fit. On Fords only bulbs above 1A work fine.
Do not fit h7 led into these specific lights they start bubbling the chrome reflector when on. I installed novsight h7 mini and we're only on for 2 miles and they ruined my refectors, installing these cost me £566 quid for a new pair of headlights on my 2019 st line x
using a thin strap slid in between the light unit to pull it away from the body helps.
Can you do a how to replace the fog lamps on 2019 Focus? same as features in this video.
Can you please upload how to replace the fog light bulb?
I agree. Please do this one
Did you manage to get the tailgate light unit out? I need to replace my reversing light bulb and I've undone the wing nut but can't get the unit off
Hello, have you do any operation for hatch lamp that you couldnt uninstall? My lamp is not working, and i cant open it
Hi, in the video the light bulbs did not fit is there any chance of you doing another video but completing the switch with led bulbs that fit?
Hi, sorry it was rental car so limited possibilites there... I can point you to bulbs that will work if needed
Come hai fatto? Quali frecce hai preso? Con i led in frecce poi aumenta il tic-tac-tic-tac rapido in auto.
You mention at 0:18 that the Fog light bulbs are H8, but do not show how to get to them and replace them. Also the main beam bulb (not high beam) I have in my European 2019 Ford Focus New does not look like the bulb you pulled out, so neither does the harness/connector.
Hi, sorry it was a rental car and I didnt have many tools and didnt wanted to break anything. Please check the bulb before buying as there can be differences. Thanks
@@Mckauto Okay, but it would be nice if the video was complete.
@@davidboyd267 Im always trying to do that but fog lights in many cases require removing the wheel and I simply didnt have tools for that. Sorry
@@davidboyd267 hi, you need remove the headlights to acess the fog light , you need a torx T30 and small screwdriver to remove de plastic pin , under the headlighits you can acess to the fog lights
@@joaogoncalves9960 Thanks, there is nowhere on youtube how to change a bulb in a Focus mk4 fog light...
Hello Sir.
Did u have find de Adapter for the H1 Lightning?
quais foram as leds usadas na H7 ? não cegam quem esta de frente ?
Nao consegui achar ainda os que funcionam bem com Focus infelizemente. Estou procurando
@@Mckauto obrigado
@@Mckauto procura por adaptadores h1 e h7 no aliexpress , há uns grampos de metal ou plastico para fixar os leds comforme a marca de modelo do carro para as h1 vais precisar também de um cabo adaptador de 2 pinos para 1 pino, para h1 recomendo leds 360
Did you change the break light out with red or white P21W LED?
Hi. I'm collecting my new Focus ST line X at the end of the month. I watched your video with great interest. Do you have to fit anything else to the bulb's? Such as the "Warning Resistor Decoder Anti Flicker" or do you just fit them. Thanks, Malc
Hi, the bulbs mentioned in video are working with nothing extra needed. Just swap the original ones :)
@@Mckauto what was the wattage of the PW21 led you used & gave you no errors without an additional resistor?
Meglio un kit a led h7 o lampadine a led h7? Hai link per kit a led?
Hi! Focus 2019 owner here. Did You found already some decent LED H7 adaptors? I have one set of Ultineon 9000Pro LED H7 but not able to fit them into the lamp... Apreciate any help. Cheers!
Did you end up finding main low dip beam LED bulbs that would suit this car?
hi, still working on it as i would have to order mould and then 10,000 pcs to start with...
Hi ! How did you go about unscrewing the 2 long plastic nuts to remove the rear light? Mine are impossible to unscrew by hand ...
yea mine too, i snapped a piece of plastic it was so hard to remove..
@@Mckauto I used a pair of long nosed, pin nosed pliers. I got the jaws onto the plastic lugs and gradually increased turning force until the joint gave. It's very awkward to see but when you manage to get it, put a smear of petroleim or silicone grease on the male thread and into the plastic female thread before reassembly. Just like a water tap, don't turn it home fully hard and leave it but back it of a couple of degrees and it won't seize again.
Hi, the rear sidelights are P21W ? are you sure ? the osram site says that is W5W.....
Please check your car as even different model year, different trim can have different type of bulb, this one was P21W. Thanks
Hi, I am currently trying to replace h7 bulbs but the led light narva h7 which I bought they don't fit. Do you know how I can I get them to fit cause I am looking for a solution a while now and I am pretty disappointed
Hi, each car has its specifics and might require adapters, I was struggling honestly with this Focus as the lug was on other side and I couldnt slot them. Im still trying to find alternative to be honest. Please try some Ford forums, they might have some solution by now. Thanks
I have a few questions I hope you or someone in the comments can answer. I own a MK4 Focus ST-Line and am currently considering replacing the standard halogen headlights for the OEM LED headlights (not the iLED), as that's an option that is missing on my car and I would love to have. My question is, if it is at all possible, are the headlights plug and play or does it require coding of some sort?
Also, I have a pair of PY21W LED indicators that I bought for my MK3 Mégane, very similar to the ones you have. Unfortunately they didn't work properly as the bulbs don't have a resistor, which causes the common hyperflashing issue. I know the Focus has a CAN bus system, but I don't know if that would solve the problem.
Kind regards from Portugal!
Hi the first part not sure, the second about PY21W you need bulbs with minimum 1A CanBus current:
amzn.to/2HhSmNy
amzn.to/2UNTa4Q
Any of these 2 - sometimes some of them not in stock but I will get more.
Thanks
@@Mckauto I gave them a shot and surely they didn't work. They were a pair of relatively cheap LED bulbs from Amazon, they don't draw much power at all. The car thinks the bulb is shot and it hyperflashes.
I'll look into getting one of yours. Thanks!
@@mikerelvas Thanks, I always carry 3 types of bulbs for testing - 0.5A, 1A and the fat ones are 2.7A but need to check diameter if they will fit. On Fords only bulbs above 1A work fine.
Boas, o led fez muita diferença se comparado com as de origem?
E quais as que instalou?
Obrigado
Ola, sim muida diferenca, ninguem gosta de luz amarela :D
Só é pena ser ilegal, ou ao menos esta na zona cinzenta da nossa lei
Did you find a adaptor for the led bulb?
No unfortunately didnt came across one yet, maybe some other seller has or on some Ford forum. Regards
Цвет машины просто огонь! Такой же как у меня)
Very good video,Thanks。
Glad you liked it! All the best!
Your website is not working mckauto.com?
Hi, were building a new one. Sorry for the delay,
please visit amazon meanwhile
www.amazon.co.uk/mckauto
Thanks
Good job
Thanks
Is very shity to change some bulbs. Not easy
Top