I built 4-5 times and failed Then it turns out that most of the igbts on the market are fake I ordered some original igbt and with those igbts this circut finally worked also the inductor coil should be 75-100 turns better if 2 50 turns inductor coil is used in series
Never mind, catastrophic failures modes already been discussed by university scholars over a decade ago and it's still around. Actually it was a Tesla coil driver and the fans moved on to musical alternatives, dropping the Flyback transformer only allowed crooks to milk that money cow a little while longer. Don't forget Mazzilli himself preferred to call it a « Royer ZVS » in reference to the 1954 patent, e.g. now free for the take by people who like to be called "genius", on the asian continent...
...in the resonator perhaps, but it's a fundamentally flawed topology anyway: circuit protection has to be provided from outside despite having direct access to gates which instead got hard-wired!
hi, if using 12vdc then must use a transformer and it is quite a heavy and big capacity transformer, if I make a dc power supply directly taken from the 220vac power outlet (using a bridge diode and a capacitor and supposed to become about 300vdc), what needs to be modified? the size of copper and the numbers of the copper wires turning? and what else? please advise me, thanks.
I built 4-5 times and failed
Then it turns out that most of the igbts on the market are fake
I ordered some original igbt and with those igbts this circut finally worked also the inductor coil should be 75-100 turns better if 2 50 turns inductor coil is used in series
6:34 best idea all the best.
Both MOSFET will get short if u keep on for 30mins
How
Never mind, catastrophic failures modes already been discussed by university scholars over a decade ago and it's still around. Actually it was a Tesla coil driver and the fans moved on to musical alternatives, dropping the Flyback transformer only allowed crooks to milk that money cow a little while longer. Don't forget Mazzilli himself preferred to call it a « Royer ZVS » in reference to the 1954 patent, e.g. now free for the take by people who like to be called "genius", on the asian continent...
2000W at 24V = 83A WTF?
...in the resonator perhaps, but it's a fundamentally flawed topology anyway: circuit protection has to be provided from outside despite having direct access to gates which instead got hard-wired!
I struggle to see what the practical use of this can be?
Where to get 150+150 micro henry inductor coil
Сделать самому
Super! Thank you very much!
Thank you too!
can this heat aluminium also
Normal heat..
hi, if using 12vdc then must use a transformer and it is quite a heavy and big capacity transformer, if I make a dc power supply directly taken from the 220vac power outlet (using a bridge diode and a capacitor and supposed to become about 300vdc), what needs to be modified? the size of copper and the numbers of the copper wires turning? and what else? please advise me, thanks.
Yes...
@@GauravEXT hi, can you advise me the size of the copper and the numbers of turning? thanks.
Gostei
Thank's
❤@@GauravEXT
@@GauravEXTdo you have a wiring diagram for the circuit?
Thank you for Your eforts
Ну нет там 2000W! даже на глазок, в металле в виде тепла выделяется не более 600-700Вт
200-250 ватт
❤
🎉
जब मैं यह सर्किट बनाता हूं तो work क्यों नहीं करता😢
Inductor change kar ke dekho bhai..
подскажите а почему срывается частота генератора на мосфетах irfp 460 тогда когда входит внутрь железо!!
@@furik261 maybe around 20khz - 100khz
what frequency should it be?everything works fine with irf3205 mosfets
It's a fraud.
I dont bilive be 2000
I accepet 1000 watt only