I started with a Sonicrafter (not battery operated). I found it very well built. We completely renovated our house, and it's still running (something I can't say of some other tools). So I continued buying a cordless drill, the hydroshot, a string trimmer, a small circular saw, a hammer drill and a hedge trimmer. After abusing them for a couple of years, I believe they can compete with the best brands out there! Thanks a lot for your reviews, and given my experience with Worx I would add they are also very durable.
It has been a while since I last reported in on these tools and I continue to use them regularly without any issue. What do you think of the Sonicrafter?
@@MyGrowthRings It's a decent tool. I've been working with a Fein at my work, which is the grandfather of all multitools. I really can't tell the difference, so why spend the money? The only thing is I bought one of the first, which didn't have the quick release yet. So for every blade change you must get the the allen key out, which is a bit annoying.
@@permanenceinchange2326 You are right about the quick release. It’s MUCH nicer, but I suspect that took a little while for Fein patents to expire or for everyone to come up with a work-around.
Damn, 2010 - You're a WORX OG!! I think my 1st Worx purchase was around 2015 which was the good 20V Weedwacker, which I still use & appreciate to this day. Then I got the Blower, The PowerShot, The AeroCart, The little "Power Scissors", The Bigger Blower, The 40V PowerShot....& on & on. All still working just fine, a long with all the original batteries. One & only casuality, to my recollection, is one of the chargers's power adapter cracked/fell apart almost immediately years ago. But thats it! Can't say the same about all my Bauer (Harbor Freight) MultiBranded Wang Chung Shit.
I bought the second type trimmer that you bought as my first Worx tool while I was living in the suburbs. I got it with two of the 2.0ah batteries. It worked fine for regular grass and small weeds. After I moved to the country it just was cutting it and I switched to an Ego trimmer to match my Ego mower. It is actually a bit too powerful on the grass areas but it sure mows down tuff weeds. I have since bought the Worx blower and the switch driver for using around the house projects. But for heavier job I still rely on my 18V yellow tools.
Wow! Long vid, and covered a LOT of tools, with candid and helpful observations. Very informative, and I'll catalog this video for when I need to add or replace tools like these.
@@MyGrowthRings, I'll bet it took longer to edit than to record - and the annotations to the misstatements and such required close attention. (I'm starting a pool with all the voices in my head about how long it will be before we see another feature-length movie from MGR. 🤩
I have a couple of comments: Drill drivers/impact drivers are the major reason for tearing up the heads of screws and destroying driver bits. And also stripped out screw holes. Yes they are fast and labor saving and I do use them. But when it comes to brass screws and especially when installing cabinet hardware, the batteries stay in the chargers. Also I've found that using impact drivers to remove difficult fasteners is the way to go. And lastly: Deciding on choosing brush or brushless isn't a major consideration for me. I've used brushed tools for well over 60 years and I can say I have never changed a set of brushes on any of them. Something else gives out before the brushes or I quit using it for better features in another tool. IMHO Always enjoy your videos.
Dwight, how often are you installing brass screws these days? I’m struggling to remember the last time I used then, but you are right. I always drive a steel acre first then hand drive the brass screws. Thanks for watching and commenting. Scott
@@MyGrowthRings Brass screws for "specialized projects" when appearance matters. I didn't mean to imply brass screws for cabinet hardware in general. I find it risky power driving screws when a slip will cause damage to the cabinet and/or hardware. Then again I'm not a "pro".
One of the major differences that I found with my first brushless Dewalt drill was increased battery life. I use a lot of brass screws on hinges, latches and handles. You are spot on about hand driving them. As far as stripping out Phillips screws… the problem usually occurs because of a worn bit or failure to align the bit properly. I have a neighbor who always tried to drive them with a high speed drill, and an old bit… I bought him an impact driver and a dozen #2 Phillips bits as payment for helping me on a project. He’s at peace now that he sees how great they work at inserting and removing screws. Next up… I need to wean him off Phillips and get him to buy Torx screws!!!
@@sassafrasvalley1939 Man, worn out bits are the bane of my existence! I throw them away as fast as I can, but is seems that people like to hold on to them. I have a friend who has a bin filled with bits that he searches through over and over again every time he needs a bit, and once he finds the #1 square or the T25 it's usually all buggered-up!
I think that little screw-holder on the newer version of the SemiAutomatic screwdriver is actually VERY useful. No way would I throw it in the trash. There have been so many times I've dropped screws in tight spots; this thing is like a second pair of fingers to hold that screw! Anyway, great video. I have several Worx tools as well. Started with the WG163 GT 3.0 weed whacker and WG307 5 Amp JawSaw, then I got that WX176L 20V Power Share Switchdriver. After that, the Nitro WG186 40v Driveshare weed whacker (that 1st one, the WG163, lasted me several years) and the WA0222 40V Nitro Driveshare Pole Saw Attachment. I really like the Worx line. The only other battery tools I have which aren't Worx are some drills and drivers (Craftsman, DeWalt, Ryobi), a leaf blower (Craftsman) and the Craftsman V20 Miter Saw Kit (CMCS714M1). Now that Craftsman Miter saw, my man, is one hell of a good buy you ought to check out. You can take this miter saw out to a location that has no electricity and cut some baseboard, etc., and the thing has darn good power (3,800 RPM), plenty of it for normal carpentry work. Battery-life is great as well, along with being able to use batteries from other Craftsman stuff.
Just this week I picked-up a new four piece set of Worx tools on Facebook Marketplace, primarily gust so I could continue to ammas my battery collection! I haven't bit on a cordless miter saw yet, but they keep calling to me.
Great sales pitch for WORX. You must have been a leading Shopsmith salesman! I haven't considered anything but DeWalt since I bought a 9.6 volt DW926 drill driver over 30 years ago, and it still works! I've been a DeWalt man ever since. (I actually purchased a the Dewalt scroll saw before my Shopsmith, so I never even considered the SS scroll saw. I did get a couple of the old Shopsmith Jig saws at auctions with other Shopsmith items, and 6 months ago, before I saw your videos about the SS jigsaw, I tuned them up and discovered what a great saw they are.) So I doubt that I'll run out right away for any of the items you reviewed. Also the electric chain saw was very Unimpressive, but I have been using gas saws since I was a teenager, and at the age of 60,(several years ago) I got a couple Stihl saws to try to cut my own lumber with an Alaskan saw mill. I even got some chains sharpened in rip fashion. A well sharpened gas powered saw will cut thru that 12 in thick beam in seconds, not the minute it took in that extra video. So, I may be biased, but get a REAL chainsaw and learn how to sharpen it if you plan on using a chainsaw. You're right about the need for speed, but the higher horsepower of the gas saws is a big plus, especially if you need a longer bar for larger diameter logs.(And I have some nice Ash and Hickory boards from my backyard!)Keep up the great videos!
I also have a DeWalt scroll saw and we love it. Yes, a gas chainsaw is a jet rocket compared to this one! I bought it to cut the occasional downed limb, so I knew what I was getting into. Scott
@@jamespowell7196 That’s very true, but retails store sales was vastly different than the guys and gals who demo at home shows and malls. What we were doing was much more about relationships. We saw people in our store over and over again and got to know them and their woodworking ambitions, where as the folks who worked in field sales were here, there and everywhere. Like bees collecting nectar!
Thanks for the great video Scott.. We don't have menards out here in the Pacific Northwest. Home depot has Ryobi cordless tools. Like you, I have a number of them for home use. As a professional mechanic, I use Milwaukee cordless tools. They are superior in quality, performance, and durability. An interesting side note about brushless power tools. They have direct induction motors. So does the Shopsmith power pro. The advantages are lower power consumption as well as an amazing increase in performance.
Yeah, we don’t have Menards in NC either, which is why I like to visit them when I travel. Great point about brushless motors and yes, there can be a HUGE difference between consumer grade and pro grade tools. Prosumer is where the lies happen!
I’m pondering the chainsaw. Just bought & am using the WORX stapler/nailer combo, a ton of power. Received a 25% coupon that i think will toward the chainsaw.
I love my Worx tools as well. I started to reply on your recent TracSaw video with what I use, but this video is appropriate too. I use the convertible circular saw that allows me to carefully follow the edge guide I supply on site. Precision not totally, but quite respectable and No Cord! Surprised you didn't review it. WX530L Everett I tried to attach a photo but the app didn't offer an option I could find
Hey Everett. Yeah, I’ve looked at that saw and played with it every time I visit a Menard’s store but I never pulled the trigger. Good to know it has proven itself to you..” Scott
@@MyGrowthRings it is not my only saw but it really is convenient to rip a piece of facia using a straight edge from another piece as an edge guide set right on the cut line. I have corded saws as well, but the convertible convenience to go from track to circular saw is a time saver. Having other tools using the same batteries a benefit as well. You can buy just the saw, or get battery and charger. Maybe Worx will send you one to test. I love Shopsmith, but I wouldn't choose it over my router table and 3 1/4Hp Triton or my Sliding Miter saw if they are available to me.
Nice video Scott! I own(ed) several worx 56v tools. Lawnmower, string trimmer, hedge trimmer and leaf blower. The mower wasn't so great but I have no complaints with the others. The blower is a beast! BTW you should try the 20v Jawsaw! I LOVE it.
56v! Wow! My son now uses our old B&D cordless mower and it has surprised us for working so reliably for almost 10 years. The blower is impressive. I was looking at the jigsaw just last night at a Menard’s in WI and it looked pretty sweet. I don’t really have much need for one, but that hasn’t stopped me from buying the other three I own! Scott
I went crazy buying battery tools; mostly Dewalt. I love their 20V chainsaw. I also bought the Bauer 20V hot glue gun. No more extension cords. I get a lot more done.
I have always looked at Worx as a gimmicky light duty consumer brand for people who use the tools very occasionally. Need to make a decision in the near future on which battery platform/ tools I want to select going forward, so I do not have a myriad of chargers like I do now. I worry that any brand will discontinue a line in several years, forcing me into all new tools when the battery replacements become unavailable. Tends to make me think I need to go cheap and not feel bad about ditching them when the next new thing comes along. Harbor Freight just might be the way to go. Or go back to cords which never have the obsolescence problem.
Hi Scott, re your comment about Black & Decker drills not being in the same league as DeWalt drills, are you aware that B&D are the current owners of DeWalt? & both B&D & DeWalt drills are made in the same factory, & the only difference between them is the casing colors! My go-to drill for masonry & concrete drilling is my 50 year old, & still going strong, corded Black & Decker 2 speed with hammer action! It's still using the original brushes? I get a distinct impression that it's going to outlast me!!!! Great Video as usuall, keep up the good work. & Hi from the UK
Hey George. You may not know what I told her I am, but yes I am aware of Black & Decker‘s ownership of the DeWalt brand. In fact, i’m such a nerd that I attended a Harvard Business School case study on the development of the DeWalt line of hand power tools! There is quite a bit of difference between the consumer grade Black & Decker and the prosumer tools sold here at least. Back in the 1980s my father-in-law owned a hardware store and we were a part of a test group that sold a line of tools called “Black & Decker Pro” which were actually re-branded European made Elu tools. That test was a fail in Black & Decker went back and eventually launched the Dewalt line to sell those very tools. Can you imagine being the young marketing executive who had to tell Alonzo Decker that his name was poison?!
I have a Worx trimmer from 10 years ago that was advertised as really tough. They dropped it off a roof of a house & it still worked. I also get free string for life. I like it BUT the batteries keep dying. So I haven’t bought a new battery in several years and went to Black & Decker.
I have had the same experience with several brands of battery tools. The newer charges switch to trickle charge after the batteries are fully charged, but the earlier charges didn't do that so they would toast the batteries if they were left on the charger. Not to say that's what you did, but that's what I did. Scott
I have a Dewalt 12 Volt drill and a driver. The price fit my budget, I like the lower weight and bulk, with the two batteries I can swap them out, and they charge in just minutes. :)
Battery powered tools for yard care concern me. I worry about the thing dying in the middle of a job or say it has enough power but it won't cut it. then have to wait in the middle of the job for it to charge. Also, Scott why do you last few videos have a extra time of nothing but a black screen at the end?
I have a plethora of these Worx batteries, so I’ll never run out of power, but I get what you mean. I didn’t know about the black screen so thanks for pointing it out. Scott
To be fair, that chainsaw comparison would have been a lot more intresting if it included the Worx Nitro Cordless Chainsaw, as it has the same chainspeed as the Thikita, for around same price.
The Sawsmith 2000 was a tablesaw and yes, I once owned one and will have another one delivered this Summer. Once I have it in the shop we'll take a look at it together. Scott
Great info on Worx. I often see commercials for their products & wonder if they are worth the money. So, based on your review & use, seems like a good way to go. Nice to be able to use the same battery pack on many separate tools. 👍
I noticed you say you need to Press a button to advance the string on the weed eater. These buttons are designed to be slamed on the ground wile you full throttle that impact lat it advance a few mm forward
@@MyGrowthRings Well, i Just needed to mention it curse a Lot of people i meet didnt know that they have the Funktion . They Always Stop Turn around Press the knob by Hand an pull , but all they needed to do was give IT a smack now and then . But i See you know what i mean
My Bauer drill was junk. Chuck would not stay tight. Bought it around 2018/19, finally tossed it. I didn’t think it was worth putting it in a thrift store for the next person to fight with. Like they say, “My mileage varied.”
@@jvmorse Bunmer. I have no plans to be there. My buddy who owns a SS planer was going to loan me his when I was showing the conical sander and the sharpening jig, but he put it in storage. I’ll have to find another locally.
Looks like they are tools with unique features for an affordable price, thanks for the experienced review.
I started with a Sonicrafter (not battery operated). I found it very well built. We completely renovated our house, and it's still running (something I can't say of some other tools).
So I continued buying a cordless drill, the hydroshot, a string trimmer, a small circular saw, a hammer drill and a hedge trimmer. After abusing them for a couple of years, I believe they can compete with the best brands out there!
Thanks a lot for your reviews, and given my experience with Worx I would add they are also very durable.
It has been a while since I last reported in on these tools and I continue to use them regularly without any issue. What do you think of the Sonicrafter?
@@MyGrowthRings It's a decent tool. I've been working with a Fein at my work, which is the grandfather of all multitools. I really can't tell the difference, so why spend the money? The only thing is I bought one of the first, which didn't have the quick release yet. So for every blade change you must get the the allen key out, which is a bit annoying.
@@permanenceinchange2326 You are right about the quick release. It’s MUCH nicer, but I suspect that took a little while for Fein patents to expire or for everyone to come up with a work-around.
I own some Worx Tolls and they are fine. My interest in this channel is really for ShopSmith. Hope we get back to that soon.
Next video, I promise!
+1
Damn, 2010 - You're a WORX OG!! I think my 1st Worx purchase was around 2015 which was the good 20V Weedwacker, which I still use & appreciate to this day. Then I got the Blower, The PowerShot, The AeroCart, The little "Power Scissors", The Bigger Blower, The 40V PowerShot....& on & on. All still working just fine, a long with all the original batteries. One & only casuality, to my recollection, is one of the chargers's power adapter cracked/fell apart almost immediately years ago. But thats it! Can't say the same about all my Bauer (Harbor Freight) MultiBranded Wang Chung Shit.
I bought the second type trimmer that you bought as my first Worx tool while I was living in the suburbs. I got it with two of the 2.0ah batteries. It worked fine for regular grass and small weeds. After I moved to the country it just was cutting it and I switched to an Ego trimmer to match my Ego mower. It is actually a bit too powerful on the grass areas but it sure mows down tuff weeds. I have since bought the Worx blower and the switch driver for using around the house projects. But for heavier job I still rely on my 18V yellow tools.
Too powerful? How is that possible?
Wow! Long vid, and covered a LOT of tools, with candid and helpful observations. Very informative, and I'll catalog this video for when I need to add or replace tools like these.
Super-long video indeed. Thanks for watching, Sean.
@@MyGrowthRings, I'll bet it took longer to edit than to record - and the annotations to the misstatements and such required close attention. (I'm starting a pool with all the voices in my head about how long it will be before we see another feature-length movie from MGR. 🤩
@@seanflanagan5674 You are right about the time spent editing.
I have a couple of comments: Drill drivers/impact drivers are the major reason for tearing up the heads of screws and destroying driver bits. And also stripped out screw holes. Yes they are fast and labor saving and I do use them. But when it comes to brass screws and especially when installing cabinet hardware, the batteries stay in the chargers. Also I've found that using impact drivers to remove difficult fasteners is the way to go. And lastly: Deciding on choosing brush or brushless isn't a major consideration for me. I've used brushed tools for well over 60 years and I can say I have never changed a set of brushes on any of them. Something else gives out before the brushes or I quit using it for better features in another tool. IMHO Always enjoy your videos.
Dwight, how often are you installing brass screws these days? I’m struggling to remember the last time I used then, but you are right. I always drive a steel acre first then hand drive the brass screws. Thanks for watching and commenting. Scott
@@MyGrowthRings Brass screws for "specialized projects" when appearance matters. I didn't mean to imply brass screws for cabinet hardware in general. I find it risky power driving screws when a slip will cause damage to the cabinet and/or hardware. Then again I'm not a "pro".
Agree with your comment about brush vs brushless. But maybe I just don't use my tools as much as other people do.
One of the major differences that I found with my first brushless Dewalt drill was increased battery life.
I use a lot of brass screws on hinges, latches and handles. You are spot on about hand driving them.
As far as stripping out Phillips screws… the problem usually occurs because of a worn bit or failure to align the bit properly. I have a neighbor who always tried to drive them with a high speed drill, and an old bit… I bought him an impact driver and a dozen #2 Phillips bits as payment for helping me on a project. He’s at peace now that he sees how great they work at inserting and removing screws.
Next up… I need to wean him off Phillips and get him to buy Torx screws!!!
@@sassafrasvalley1939 Man, worn out bits are the bane of my existence! I throw them away as fast as I can, but is seems that people like to hold on to them. I have a friend who has a bin filled with bits that he searches through over and over again every time he needs a bit, and once he finds the #1 square or the T25 it's usually all buggered-up!
I think that little screw-holder on the newer version of the SemiAutomatic screwdriver is actually VERY useful. No way would I throw it in the trash. There have been so many times I've dropped screws in tight spots; this thing is like a second pair of fingers to hold that screw!
Anyway, great video. I have several Worx tools as well. Started with the WG163 GT 3.0 weed whacker and WG307 5 Amp JawSaw, then I got that WX176L 20V Power Share Switchdriver. After that, the Nitro WG186 40v Driveshare weed whacker (that 1st one, the WG163, lasted me several years) and the WA0222 40V Nitro Driveshare Pole Saw Attachment. I really like the Worx line. The only other battery tools I have which aren't Worx are some drills and drivers (Craftsman, DeWalt, Ryobi), a leaf blower (Craftsman) and the Craftsman V20 Miter Saw Kit (CMCS714M1). Now that Craftsman Miter saw, my man, is one hell of a good buy you ought to check out. You can take this miter saw out to a location that has no electricity and cut some baseboard, etc., and the thing has darn good power (3,800 RPM), plenty of it for normal carpentry work. Battery-life is great as well, along with being able to use batteries from other Craftsman stuff.
Just this week I picked-up a new four piece set of Worx tools on Facebook Marketplace, primarily gust so I could continue to ammas my battery collection! I haven't bit on a cordless miter saw yet, but they keep calling to me.
Great sales pitch for WORX. You must have been a leading Shopsmith salesman! I haven't considered anything but DeWalt since I bought a 9.6 volt DW926 drill driver over 30 years ago, and it still works! I've been a DeWalt man ever since. (I actually purchased a the Dewalt scroll saw before my Shopsmith, so I never even considered the SS scroll saw. I did get a couple of the old Shopsmith Jig saws at auctions with other Shopsmith items, and 6 months ago, before I saw your videos about the SS jigsaw, I tuned them up and discovered what a great saw they are.) So I doubt that I'll run out right away for any of the items you reviewed. Also the electric chain saw was very Unimpressive, but I have been using gas saws since I was a teenager, and at the age of 60,(several years ago) I got a couple Stihl saws to try to cut my own lumber with an Alaskan saw mill. I even got some chains sharpened in rip fashion. A well sharpened gas powered saw will cut thru that 12 in thick beam in seconds, not the minute it took in that extra video. So, I may be biased, but get a REAL chainsaw and learn how to sharpen it if you plan on using a chainsaw. You're right about the need for speed, but the higher horsepower of the gas saws is a big plus, especially if you need a longer bar for larger diameter logs.(And I have some nice Ash and Hickory boards from my backyard!)Keep up the great videos!
I also have a DeWalt scroll saw and we love it. Yes, a gas chainsaw is a jet rocket compared to this one! I bought it to cut the occasional downed limb, so I knew what I was getting into. Scott
Oh, and though I worked for Shopsmith I was never a salesman for them. I ran one of their stores and ran a couple of their Academies.
@@MyGrowthRings As I recall, you did mention that your store set sales records in its first couple months.
@@jamespowell7196 That’s very true, but retails store sales was vastly different than the guys and gals who demo at home shows and malls. What we were doing was much more about relationships. We saw people in our store over and over again and got to know them and their woodworking ambitions, where as the folks who worked in field sales were here, there and everywhere. Like bees collecting nectar!
Thanks for the great video Scott.. We don't have menards out here in the Pacific Northwest. Home depot has Ryobi cordless tools. Like you, I have a number of them for home use. As a professional mechanic, I use Milwaukee cordless tools. They are superior in quality, performance, and durability. An interesting side note about brushless power tools. They have direct induction motors. So does the Shopsmith power pro.
The advantages are lower power consumption as well as an amazing increase in performance.
Yeah, we don’t have Menards in NC either, which is why I like to visit them when I travel. Great point about brushless motors and yes, there can be a HUGE difference between consumer grade and pro grade tools. Prosumer is where the lies happen!
I’m pondering the chainsaw. Just bought & am using the WORX stapler/nailer combo, a ton of power. Received a 25% coupon that i think will toward the chainsaw.
Perfect timing! I’ve been using mine quite a bit and really like it. Scott
I love my Worx tools as well.
I started to reply on your recent TracSaw video with what I use, but this video is appropriate too.
I use the convertible circular saw that allows me to carefully follow the edge guide I supply on site. Precision not totally, but quite respectable and No Cord!
Surprised you didn't review it.
WX530L
Everett
I tried to attach a photo but the app didn't offer an option I could find
Hey Everett. Yeah, I’ve looked at that saw and played with it every time I visit a Menard’s store but I never pulled the trigger. Good to know it has proven itself to you..” Scott
@@MyGrowthRings it is not my only saw but it really is convenient to rip a piece of facia using a straight edge from another piece as an edge guide set right on the cut line. I have corded saws as well, but the convertible convenience to go from track to circular saw is a time saver. Having other tools using the same batteries a benefit as well. You can buy just the saw, or get battery and charger.
Maybe Worx will send you one to test. I love Shopsmith, but I wouldn't choose it over my router table and 3 1/4Hp Triton or my Sliding Miter saw if they are available to me.
I have the WORX chainsaw and its still going strong after about a 1.5 years. I also have several other of their tools and they have performed well.
Nice. Is yours cordless? I know they offer both. Scott
@@MyGrowthRings Mine is the 40V 14" cordless. I have batteries and chargers galore. 😁
@@Scott_AI5EF Nice!
Nice video Scott! I own(ed) several worx 56v tools. Lawnmower, string trimmer, hedge trimmer and leaf blower. The mower wasn't so great but I have no complaints with the others. The blower is a beast! BTW you should try the 20v Jawsaw! I LOVE it.
56v! Wow! My son now uses our old B&D cordless mower and it has surprised us for working so reliably for almost 10 years. The blower is impressive. I was looking at the jigsaw just last night at a Menard’s in WI and it looked pretty sweet. I don’t really have much need for one, but that hasn’t stopped me from buying the other three I own! Scott
@@MyGrowthRings The Jawsaw excels in cutting downed branches 3+ inches. And you can do it standing up without bending over!
I went crazy buying battery tools; mostly Dewalt. I love their 20V chainsaw. I also bought the Bauer 20V hot glue gun. No more extension cords. I get a lot more done.
That glue gun looks like a winner.
@@MyGrowthRings And with HF deals it was free. 'Buy a Bauer tool, a charger, a battery and get $20 off. ' I feel certain it will run again.
I have always looked at Worx as a gimmicky light duty consumer brand for people who use the tools very occasionally. Need to make a decision in the near future on which battery platform/ tools I want to select going forward, so I do not have a myriad of chargers like I do now. I worry that any brand will discontinue a line in several years, forcing me into all new tools when the battery replacements become unavailable. Tends to make me think I need to go cheap and not feel bad about ditching them when the next new thing comes along. Harbor Freight just might be the way to go. Or go back to cords which never have the obsolescence problem.
I think we all have had to go to that same thought process. That middle level Bauer tool line has proven to be a pretty solid choice. Scott
Hi Scott, re your comment about Black & Decker drills not being in the same league as DeWalt drills, are you aware that B&D are the current owners of DeWalt? & both B&D & DeWalt drills are made in the same factory, & the only difference between them is the casing colors! My go-to drill for masonry & concrete drilling is my 50 year old, & still going strong, corded Black & Decker 2 speed with hammer action! It's still using the original brushes? I get a distinct impression that it's going to outlast me!!!!
Great Video as usuall, keep up the good work. & Hi from the UK
Hey George. You may not know what I told her I am, but yes I am aware of Black & Decker‘s ownership of the DeWalt brand. In fact, i’m such a nerd that I attended a Harvard Business School case study on the development of the DeWalt line of hand power tools! There is quite a bit of difference between the consumer grade Black & Decker and the prosumer tools sold here at least. Back in the 1980s my father-in-law owned a hardware store and we were a part of a test group that sold a line of tools called “Black & Decker Pro” which were actually re-branded European made Elu tools. That test was a fail in Black & Decker went back and eventually launched the Dewalt line to sell those very tools. Can you imagine being the young marketing executive who had to tell Alonzo Decker that his name was poison?!
I have a Worx trimmer from 10 years ago that was advertised as really tough. They dropped it off a roof of a house & it still worked. I also get free string for life. I like it BUT the batteries keep dying. So I haven’t bought a new battery in several years and went to Black & Decker.
I have had the same experience with several brands of battery tools. The newer charges switch to trickle charge after the batteries are fully charged, but the earlier charges didn't do that so they would toast the batteries if they were left on the charger. Not to say that's what you did, but that's what I did. Scott
I've been using a Worx string trimmer on my lawn for at least 15 years. Hard to get that kind of life out of most cordless tools.
That is so true. My son still uses our first string trimmer and it just keeps going. Scott
I'm in the Ryobi tools right now, but maybe I need to look at the Worx when these wear out.
I have a Dewalt 12 Volt drill and a driver. The price fit my budget, I like the lower weight and bulk, with the two batteries I can swap them out, and they charge in just minutes. :)
I think 12V is probably more than enough for most things I do, too. And who needs the extra weight? Scott
Magnífica exposición, gracias
Battery powered tools for yard care concern me. I worry about the thing dying in the middle of a job or say it has enough power but it won't cut it. then have to wait in the middle of the job for it to charge. Also, Scott why do you last few videos have a extra time of nothing but a black screen at the end?
I have a plethora of these Worx batteries, so I’ll never run out of power, but I get what you mean. I didn’t know about the black screen so thanks for pointing it out. Scott
To be fair, that chainsaw comparison would have been a lot more intresting if it included the Worx Nitro Cordless Chainsaw, as it has the same chainspeed as the Thikita, for around same price.
Saw an add for a sawsmith by shopsmith looked like a table saw do you have one? Can you do an show on it?
The Sawsmith 2000 was a tablesaw and yes, I once owned one and will have another one delivered this Summer. Once I have it in the shop we'll take a look at it together. Scott
I need that chuck for the SS, someone make one for the 3/8" shaft!
Great info on Worx. I often see commercials for their products & wonder if they are worth the money. So, based on your review & use, seems like a good way to go. Nice to be able to use the same battery pack on many separate tools. 👍
I have been consistently impressed.
Where can I buy Worx trimmer in my area?
Where’s your area? You can buy them on Amazon or even directly from Worx on their website.
I noticed you say you need to Press a button to advance the string on the weed eater. These buttons are designed to be slamed on the ground wile you full throttle that impact lat it advance a few mm forward
Not on the Worx string trimmer.
@@MyGrowthRings Well, i Just needed to mention it curse a Lot of people i meet didnt know that they have the Funktion . They Always Stop Turn around Press the knob by Hand an pull , but all they needed to do was give IT a smack now and then . But i See you know what i mean
My Bauer drill was junk. Chuck would not stay tight. Bought it around 2018/19, finally tossed it. I didn’t think it was worth putting it in a thrift store for the next person to fight with. Like they say, “My mileage varied.”
Did it go to pot within the ridiculously short 90 day warranty? Scott
Didn’t use it within the warranty period. That’s a lesson to learn. New tool? Use it.
@@thomasslate5341 Lesson learned! #DriveItLikeYouStoleIt!
Meh…da planer…da planer…
Worx planer?
Nooo, the Shopsmith plainer. You were going debute that in January? Do you need one? You can use mine…
@@jvmorse Where is yours located?
St Louis,MO
@@jvmorse Bunmer. I have no plans to be there. My buddy who owns a SS planer was going to loan me his when I was showing the conical sander and the sharpening jig, but he put it in storage. I’ll have to find another locally.