Also, some of those plugs you can stick a pick tool in there and loosen it, then pull it right out the back. Probably able to replace the individual pins easier than the pigtail end itself.
Instead of blurring that column, which you can see thorough if you look hard, just right click on the top the column and click hide. To unhide, highlight the rows on either side of the hidden row, right click, and click unhide.
You make your own content!!! love all the editing and information all in one video there is a lot of headache being an owner operator I can’t find me a good paying load worth carrying I think it’s because of thanksgiving week thankfully I’m home and most likely to be here until Monday.
** New Subscriber here** Damn brother- I hate to hear crap 💩 like that. Hauling cheap has always been a big NO NO for me, but I understand everyone situation is different. I’ve taken my authority and go direct to shipper (it’s time consuming, but the rewards are much greater in the long run), it’s much better that way. My suggestion for now- power only, pull containers or bull hauler until the rates creep back up (not knowing when that’ll be), but hauling cheap mmmmm nawl
You could take a jeweler, screwdriver or dental tool and pop those pins out of the connector house. Clean them up. Then pug them back in out hook them straight into your actuator
Same shit happened to me down in Corbin Kentucky. This was on my trailer with auto inflaters. Literally just checked them 15 miles from the Corbin scale. Had air in it but not enough to let me go. Out of service, just like you. Nothing but heartache when I run south. At least in the Midwest the scale houses all close up by 5pm, I’ll let you keep them southern loads driver. Good video sir.
I’ve notice.. if you keep stopping on the breakdown lanes or pull on side of road. There is a lot of debris, that’s not cleanup. There where you get a lot of nails and bolts, that’s bounce around on the shoulder of road. I quit pulling off to the side. I would hit up a rest area or ramp.
I hope everyone and their cousin trying to get into trucking watches this. I’m tried out seeing TH-cam truckers claiming all the high rate per miles that no ever finds. Finally someone talking sense to the masses. I swear to you when I first started trucking I used to watch hotshot TH-camrs talking about big money! They are all out of business now.
I like that you keep your numbers. If you could see my numbers versus your numbers you would be completely blown away. Make about $300,000 a year. My expenses are usually around 20 something thousand dollars a year. I work five days a weekor less Monday through Friday and I’m usually done anywhere from 2 PM to 5 PM each day. I do what I call America’s best kept secret
Damn Breaux Bridge scales.....I know them all too well. They were A holes back in the 80s when I started dealing with them. Im from Louisiana origionally. Although I am retired now I feel your pain. Crap that everybody is going through now is just BS. Eunice is pronounced You-ness btw. 😀
Thanks for sharing. Sorry you had so much grief to deal with. Question: why not carry a couple of extra tires on the truck so the truck stops don’t gouge you?
I do on my step deck because they're 17.5 tires. My tractor's 24.5 My a dry van is 22.5 But honestly I've got 305,000 mi on my truck tires and that's the first time I've had any tire trouble with it. I plan on changing all eight within the next couple of months because they're down to about 5/32
Maybe you caught a bunch of flat tires from that tight yard with all that John Deere equipment. Maneuvering back and forth catching a bunch of punctures in all your tires. What a p.i.t.a.!!! Happy Thanksgiving! Enjoy it
Could you show just fuel expense and miles per gal. Then add it up in a years expense. The w9 is cool. But pushing a barn door down the road is not cheap for sure.
I stopped driving 15 years ago and i still have dreams (almost nightmares) about backing up and getting stuck turning around in yards, flats, brakes going out, etc. It will probably haunt me for life 🥹
Hi Billy.Seems that you are still struggling to get your company going in the right direction to get some good money.Even if you do reapers on your own it's hard for you to save some money for the future.
The goal of the industry is to "drive" you out, better know that going in. Best to just go old school outlaw, ask the broker for the hot loads that pay more and route around the scales. Hot loads probably;y don't pay anymore to cover it, might be able to find specific brokers though.
Because 140 is what Google maps says it is. That's what the broker probably saying it is too. But the 602 is taking the ending odometer from the previous ending odometer and auto calculates the 602 The 467 is taking the starting odometer from the previous ending odometer.
Yes, watch again. Empty miles are included in the final average. Also at the beginning I'm showing the weekly without the deadhead and with the deadhead included.... I show it both ways, without the deadhead what's the load paid, then with the dh, that always the most important
Wrong title of video.. Get input from successful business people about your trucking business plan. Business is business many people are good at it just because you don’t know what you’re doing doesn’t mean others are the same.
O/o of five trucks in the 90,s your just stupid to be o/o nowadays, I’m company driver, paid holidays bonus for being out, in a new truck, an paid all empty miles whatever I do…. Work smarter, not harder, 37 years in the industry driving,,, keep your fancy trucks, company says they’re gonna get me one of my choice, lmao, stupid ppl!!!
Do videos on weeks where you didnt make any money at all cause it was all shit paying loads , all owner ops are quick to post videos on good weeks but they never post videos on weeks they made nothing but scraps
If I don't make any money for a week it's because I didn't work. I can show you 13 years of those spreadsheets. Never getting rich.. It's always a struggle with one truck running the load boards
Well.... It's complicated One of the long deadheads was from Jacksonville to Augusta. There's nothing in Jacksonville and there was nothing in Savannah that day and a guy called me with a great load from here at the house so it just made sense. A few weeks ago I was in Chesapeake and it was Friday at 8:00 p.m. when I delivered. That's also a bad area and there was no loads on the board with my step deck that weekend and nothing showing up for Monday so I just came home 450 mi
This is the stuff they dont show on tiktok videos. 🤣
Most of those are paid promotions anyway. Never trust someone to be 100% honest when they're being paid to shill something.
Now this is the type of owner operator channel that should blow up, I've been looking for a channel like this for a while. Great content
Thanks
Hope you have a better week
Happy Thanksgiving and prayers for safe travels.
Your videos are always very informative
Thank you for your transparency and content 😊
I had to subscribe to this channel. It’s always something in trucking. Shippers & DOT will lose you money
Also, some of those plugs you can stick a pick tool in there and loosen it, then pull it right out the back. Probably able to replace the individual pins easier than the pigtail end itself.
It’s a lot of work running your own show. The awesome job you do with video and editing, I don’t know how you can do it. You are a great storyteller.
First video watched and im already subscribed and automatically liked. Keep up the great content, stay safe driver.
Instead of blurring that column, which you can see thorough if you look hard, just right click on the top the column and click hide. To unhide, highlight the rows on either side of the hidden row, right click, and click unhide.
Good clean video man. Sorry you had to go through all that!
I’ve got in 2 weeks 5 flat trailer tires on the same route LA to TX. I spent 1600$ just to fix everything and keep rolling. Tough time , tough time.
you do a fantastic job keeping your revenue up running short, fantastic job ❤
Very informative video. Keep pushing your brand forward!💪🏾🫡
Brother...u got my respect!!!! Lol 🤙🏾💯
It’s tuff man! Really tuff
The things we go through as o/o
You make your own content!!! love all the editing and information all in one video there is a lot of headache being an owner operator I can’t find me a good paying load worth carrying I think it’s because of thanksgiving week thankfully I’m home and most likely to be here until Monday.
Yeah, I'm home too.
Happy Thanksgiving
I been a owner operator over 25 years its not bad.
😂 John Deere was waiting for you..
Sounds like they threw them nails in the yard right before you pulled in
Good to see another driver out of my area.
Me here too! Parked my truck end of May 2018!
I’m a owner operator to it’s a constant cycle of issues. It sucks all of us owner operators struggle, the same way my latest repair was a airbag.
Yes, it's when you think you got everything perfect and nothing's going to happen, everything happens
@ Yep same here a few weeks ago I had a laundry list of repairs I try to fix everything myself even changing tires
** New Subscriber here**
Damn brother- I hate to hear crap 💩 like that. Hauling cheap has always been a big NO NO for me, but I understand everyone situation is different. I’ve taken my authority and go direct to shipper (it’s time consuming, but the rewards are much greater in the long run), it’s much better that way. My suggestion for now- power only, pull containers or bull hauler until the rates creep back up (not knowing when that’ll be), but hauling cheap mmmmm nawl
You could take a jeweler, screwdriver or dental tool and pop those pins out of the connector house. Clean them up. Then pug them back in out hook them straight into your actuator
Oh, so much stuff laying on roads anymore, tires always pick stuff up
Same shit happened to me down in Corbin Kentucky. This was on my trailer with auto inflaters. Literally just checked them 15 miles from the Corbin scale. Had air in it but not enough to let me go. Out of service, just like you. Nothing but heartache when I run south. At least in the Midwest the scale houses all close up by 5pm, I’ll let you keep them southern loads driver. Good video sir.
I’ve notice.. if you keep stopping on the breakdown lanes or pull on side of road. There is a lot of debris, that’s not cleanup. There where you get a lot of nails and bolts, that’s bounce around on the shoulder of road. I quit pulling off to the side. I would hit up a rest area or ramp.
Yes, I go to exit ramps or get on ramps
Great video, 👍
I hope everyone and their cousin trying to get into trucking watches this. I’m tried out seeing TH-cam truckers claiming all the high rate per miles that no ever finds. Finally someone talking sense to the masses.
I swear to you when I first started trucking I used to watch hotshot TH-camrs talking about big money!
They are all out of business now.
Di you absolutely swear or are you willing to go to the bighouse?
Awesome content. I just discovered your channel and I'm a new subscriber.
Thanks and welcome. 👍
It's always something. There are way more variables today than in the past. The truck design itself is becoming a problem for owner operators.
I like that you keep your numbers. If you could see my numbers versus your numbers you would be completely blown away. Make about $300,000 a year. My expenses are usually around 20 something thousand dollars a year. I work five days a weekor less Monday through Friday and I’m usually done anywhere from 2 PM to 5 PM each day. I do what I call America’s best kept secret
In trucking/transportation ?
Ohhh...you're the guy in Federal Reserve minting money! :)
So where are you at to do that.?
Can I buy your secrets before you retire?
@@higb7 Home Inspections
Man,thanks for video.
Sounds real,not fake bs
“Went home and grabbed my step deck”
Yeah must be nice
Damn Breaux Bridge scales.....I know them all too well. They were A holes back in the 80s when I started dealing with them. Im from Louisiana origionally. Although I am retired now I feel your pain. Crap that everybody is going through now is just BS. Eunice is pronounced You-ness btw. 😀
Thanks, It's nice to know the proper way to say it.
Not many of you on the the roads anymore ❤🇺🇲♥️💯👍
Thanks for sharing. Sorry you had so much grief to deal with. Question: why not carry a couple of extra tires on the truck so the truck stops don’t gouge you?
I do on my step deck because they're 17.5 tires.
My tractor's 24.5
My a dry van is 22.5
But honestly I've got 305,000 mi on my truck tires and that's the first time I've had any tire trouble with it.
I plan on changing all eight within the next couple of months because they're down to about 5/32
Rock on !!! Sounds like you are living the dream !!!!
😂
Way way better than working for someone else you could be only bringing home $1500 a month breaking your back for someone else
I love your record keeping also
Thanks, I just like to know what I'm doing. My memory don't go back past yesterday 😅
Maybe you caught a bunch of flat tires from that tight yard with all that John Deere equipment. Maneuvering back and forth catching a bunch of punctures in all your tires. What a p.i.t.a.!!! Happy Thanksgiving! Enjoy it
What program do you used to layout everything ! Very good video
Could you show just fuel expense and miles per gal. Then add it up in a years expense. The w9 is cool. But pushing a barn door down the road is not cheap for sure.
I have that on the same spread sheet.
It's on a different tab
I stopped driving 15 years ago and i still have dreams (almost nightmares) about backing up and getting stuck turning around in yards, flats, brakes going out, etc. It will probably haunt me for life 🥹
Idk why they put signs up down the road after the fact you're committed to the route
One hundred percent!!
Hi Billy.Seems that you are still struggling to get your company going in the right direction to get some good money.Even if you do reapers on your own it's hard for you to save some money for the future.
Wow …!that is why I am not an owner operator
Is it even worth it anymore being an owner/operator? If so, would tanker be the way to go?
But what went right
? Your home your safe. Happy Thanksgiving.
Yes, it was an annoying trip, and happy Thanksgiving to you
Put a new actuator on it. The pins are probably corroded. I have replaced a lot of these.
I already did that.
I'm pretty sure it's the pins inside the plug.
I was able to find one in Jacksonville though I just got to put it on now
What about owner operator for a dump truck? Any thoughts ?
What I don’t understand is why drivers complain but still running loads if the money is not good?
The goal of the industry is to "drive" you out, better know that going in. Best to just go old school outlaw, ask the broker for the hot loads that pay more and route around the scales. Hot loads probably;y don't pay anymore to cover it, might be able to find specific brokers though.
....But, you love your job 🤣🤣🤣
👍good one!
@adco should be more like, 'I see the problem here.. You love driving, check..'
Driver need to be paying someone to drivers a truck. Its a priviledge.
Been there
Sorry, all that happened to you man
Do you have a download for the excel template?
No.... It's easy to build.
Eunice is pronounced unis
I live few miles from unis
Why dont the number add up right ? 140+467 = 607 not 602 and 950 + 154 =1,104 not 1,140
Because 140 is what Google maps says it is. That's what the broker probably saying it is too.
But the 602 is taking the ending odometer from the previous ending odometer and auto calculates the 602
The 467 is taking the starting odometer from the previous ending odometer.
On the next video I'll show you what I'm talking about next time I bring up numbers and my spreadsheets
About to be
You’re not adding your empty miles into what you made from the loads.
Yes, watch again.
Empty miles are included in the final average.
Also at the beginning I'm showing the weekly without the deadhead and with the deadhead included....
I show it both ways, without the deadhead what's the load paid, then with the dh, that always the most important
Wrong title of video.. Get input from successful business people about your trucking business plan.
Business is business many people are good at it just because you don’t know what you’re doing doesn’t mean others are the same.
O/o of five trucks in the 90,s your just stupid to be o/o nowadays, I’m company driver, paid holidays bonus for being out, in a new truck, an paid all empty miles whatever I do…. Work smarter, not harder, 37 years in the industry driving,,, keep your fancy trucks, company says they’re gonna get me one of my choice, lmao, stupid ppl!!!
Do videos on weeks where you didnt make any money at all cause it was all shit paying loads , all owner ops are quick to post videos on good weeks but they never post videos on weeks they made nothing but scraps
If I don't make any money for a week it's because I didn't work.
I can show you 13 years of those spreadsheets.
Never getting rich..
It's always a struggle with one truck running the load boards
Let's see Trump make Owner Operator Rates Great Again
Presidents don’t make the rates. The market dictates the rates.
@user-ln7of9gs4s he can possibly execute more regulations and transparency on these greedy brokers
All them profits have gone to that executive office furniture
😅 Ha, it's a $499 desk from Costco I bought 5 years ago
@higb7 500 bucks 😳
Why are you deadheading so far for free that's one of your problems
Well.... It's complicated
One of the long deadheads was from Jacksonville to Augusta.
There's nothing in Jacksonville and there was nothing in Savannah that day and a guy called me with a great load from here at the house so it just made sense.
A few weeks ago I was in Chesapeake and it was Friday at 8:00 p.m. when I delivered. That's also a bad area and there was no loads on the board with my step deck that weekend and nothing showing up for Monday so I just came home 450 mi
Hi Billie love your videos. Keep them coming. Yes been owner operator since 1976. Worst I have ever seen. Best of luck. Happy thanksgiving old trucker