Hey everyone, thanks for watching. Make sure you Subscribe to the channel so you never miss an episode of weld.com. Make sure to hit the notification button to so that you'll get a notification every time we release new content. On behalf of the entire crew at weld.com thanks for the support.
This is, by far, the best, most comprehensive Oxy-Acetylene torch tutorial I've seen! Thank you so much for all the effort that you all put into the video! Thanks again, Jon
I cut and weld everyday at work and sometimes at home. Mostly 3/8" + thickness. I never even think about 90% of the stuff you describe. Thanks for the refresher course. Great video👍👍
i have just purchased my first Oxy system. I have just spent the last few hours watching YT videos to see what to do and not to do. I will stop watching any more videos and just keep reviewing this on. The instructor does not just tell you what to not to do, but explains and shows. This is a great learning video.....My Emmy nomination
I've probably watched an hour of other torch videos and this one was, without a doubt, the most informative. I really respect the amount of pride you place in your career and it shows because of the amount of safety items you address. It was very "Mike Rowe"esk. We should always be as safe as we can be.
This is absolutely one of the best tutorial videos I have ever watched. Great attention to details beginners (like me at 73) need. You ought to have, if you don't already, a cable TV show. Great teaching, not boring. things that a person who wants to learn will remember forever. Thumbs Up!!!
I was a farm boy welder/torch user who became a process engineer for 40 years. I always liked getting tips from my pipe fitters on welding and cutting. As I showed respect for their knowledge and skills, they always tolerated me watching them work. This presentation of proper torch use is right up there with the best tutorials I've ever seen. Outstanding job. As someone else commented: it must be THOSE guys who gave it downrates.
Honestly you are one heck of a teacher,I have never seen nobody and I mean nobody break it down so comprehensively this way,it is just like you opened my head and poured everything in there and what makes it more interesting is your sense of humour,along with your explanation you poured in some jokes,I just felt like the session does not come to an end. I want to really say a big thank you for this priceless job that you did here, you are such a wonderful person .
The respect for the rules, safety and the equipment, the way you teach and the knowledge you have about this stuff is out of this world. You, you're good, you! Respect
As somebody who just acquired a cutting torch kit, this video is an awesome teaching aid so I don't accidentally "death" myself or someone else. I absolutely love the humor when teaching *serious* stuff. Thank you so much... greatly appreciated!
I watched this video yesterday, woke up today, and BOOM, welding diploma was in my mailbox! LOL. Thanks for one of the best videos I have seen on the Tube. I don't even know how 45 mins went so fast. Great info, great presentation, and I chuckled quite a few times. And of course, I learned stuff. Awesome!
By far the best and most informative infomercial that I have ever seen. Thank you. The only two things I would add to this is one, no mention of a fire extinguisher close by, and two, make sure your pant legs are outside of your boots. I know this from personal experience. Thank you again
You're a great instructor Jason. I had a good welding instructor, so I knew *most* of this already, but you showed a few things I didn't know. Love the videos you guys make.
Watched a lot of torch videos, you are the only one to show fuel off last, as I was told a long time ago. You are a very good educator (don't take that lightly), your students will appreciate your wisdom for years to come. Thanks for these tutorials and your time.
Learn something everyday I have been told. I have been in the trade for many years and thought I would watch this video as a refresher. The part on rose buds was great! Did not know the volume of a acetylene cylinder played a part in the size of rose bud you can use. Thanks!
I've been using an oxy acetylene rig for 46 years! Welding, brazing, cutting, and heating with a rosebud... was amazed at what I learned from this video!
“You don’t want to go through life with a dirty tip”. It’s great to see more of the welder’s humour in this video. This channel is usually a bit more “professional” than AvE, it I’m glad to see some jokes too. Great work folks!
I have been welding for nearly 40 years, some of that time professionally and I STILL learned something new today. Thank you and I am now a new Subscriber.
Brand new working on welding and cutting (farm/ranch work). This is one of the most informative videos I've ever watched. I'll watch it several more times as I work on cutting. 'cause I do'nt want to be "that guy". Thank you very much Red Beard for being informative and educational !
Excellent video. I work for one of the major players in the industry and am always afraid of what people get into without proper education. This is well presented and full of solid information. 45 minutes well spent
You sir will be one of THOSE Instructors. The best of the best that everyone wants to learn from, and rightly so. I’m going to show my 15 yo son this, just to give me a little better piece of mind, when he just wants to go hang out in the shop.
Thank you for explaining WHY on so many things, because it's easier for me to remember how something works than a procedure without context. If you haven't been an instructor, you should consider it, because you absolutely nailed this. I expected to watch 10 minutes of mostly review when I had some downtime, and was glued to my screen to the end. I'm not a pro, but I have never seen anyone make such a clean cut with a torch. I can help on the scarfing term a bit. In woodworking, a scarf is a long shallow bevel that can be used to join wood to make longer boards. The scarf tip looks like it was meant to cut long shallow bevels also.
It's been literally decades since I did any cutting. This was a great refresher as the guy that taught me was definitely not "safety first" - he was an old school oilwell welder and lived on crappy cigars, bourbon and risk. Very well done video! Liked and subscribed.
I don't have much oxy acetylene experience and only use my torch set a couple times a year so I probably need to watch this video before each use. Thanks for yet another helpful video.
My son is getting ready to take courses in welding for the first time in his life. Your videos made everything easy to understand and you covered everything from setup, safety, OSHA to breakdown.
THAT was NOT a waste of time. You covered things I needed to know and wanted to know without wasting time. Last time I used a torch was in high school. Wanted to get familiar with whtat I needed to do to be able to use a torch again. Great presentation. Thank you!
Absolutely EXCELLENT instructional video on O/A. The best I've ever seen. You cover a lot of points that are lacking on other videos (and by other instructors). Thanks a million.
I havent picked up a torch in 40 years. Just kind of remembered how my dad showed me. 15 minutes of refresher on flame adjustment and cut some bolts out of my truck frame. Thanks for the great video.
Excellent detailed instructive tutorial, I was aware of the dissolved acetylene and upright usage. But the big new to me was the Venturi effect on nozzle blockage, brilliant. Thanks for sharing.
Lots of good tips. I got to looking at my torch (Airliner AW-200, AT605 Rosebud) instructions and wanted to add another note it said about the Rosebud; "CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors. It may be necessary to increase outlet pressures to compensate for flow restriction that may be created by flashback arrestors."
That trick using the hose clamp is a great idea. I made a couple burn bars a while ago after watching Bob do a video but while that has helped me cutting straight it doesn't help me keep the tip the proper distance from the work piece. Thanks for the video and suggestions.
One hell of an instructor, if you don't understand the procedures and the order in which to do them after watching this, you should not have a torch in your hand. Plain and simple.
My stepmom had a friend & she got burnt kind of bad because someone greased the tank valve covers, I knew the lady after when she was around 90 years old, her husband (when he was alive) would tell her that she rebuilt the well drilling bits so nice he would have her do them instead of himself. :) I keep telling my wife how nice she cuts the lawn & such. :) I'm trying to be safer when it comes to all my building projects, now I'm almost 60, & got lucky few times but don't want to press my luck either. Thanks for the videos it's helping my to understand why I cut so bad. I'm looking forwards to giving it a try again, (after watching the video again).
Jason, you hit the ball out of the stadium with this one!!! I have watched many how to oxy/fuel films/videos ( that's how old I am) and your info is spot on, and you addressed the myths and misinformation....thank you so much... I think this should be shown in all Welding classes....was it long? Yes, but the info is there....and very clear. PS, I did hear a few minor terminology flubs, but nothing to change contents.... well done, from an old geezer and admirer of Weld.com...PB
That was definitely a 45 min. seminar for Oxy-Acetylene thanks very much for all the informations included to this video, then watch again and again before use it, for a beginner. thanks dude
I recently ruined an acetylene regulator and thought it was either old age or bad gas. Now I know it was because I was on a roof and the bottle was on it's side so it couldn't fall over. I frequently lay them down and wedge them against a pipe stack so they can't roll off the roof since the roof is usually 3/12 or more pitch and a cart isn't going to work. Very informative video.
@Wroger Wroger HVAC contractor 20+ years. Took all applicable classes/courses in our trade and none of our training ever mentioned 95% of what is in this video.
Red Beard dude you rocked on this instructional video. you were to the point. there was never any question on anything you were talking about and you had the kind of work attitude that people need to have on a daily basis at work along with some humor to make the day go by quicker thank you brother for the lesson
Amazing cutting video, been looking for one like this in the past weeks, jodi and bob taught me how to weld, and both made great oxy fuel videos. But this one hit everything in between, and all the specifics. Pun intended, Bob passed the torch to the right guys👍👍..also where can i get that chart card for oxy, also for mig/steel/ss?
wealth of good info here, been using a torch for years and I learned a bunch of things. all meat and potatoes, no fluff talk, worth every minute. Thanks for taking the time to do this, big help.
Fantastic advice from start to finish and really appreciate the level of detail on safety. Hope you realise that you absolutely must have saved some person that has watched this from seriously hurting themselves along the way - good on you pal.
If you sharpen your soap stone on both ends, don’t sharpen on the same side. Make them opposite. This way no matter how the soap stone lays flat on the table, you can pick it up easily with heavy gloves on by pressing down on one end and the other end will pop up so you can grab it.
I learned a lot of new things. Good instructor. He says all important stuff. Doesn't yammer on. Understandable, carefully thought out...now I'm yammering on.
Had no idea how many times I had put my life at risk! This is the information that I have been searching for and never had anyone around who understood it any better then I did. Thank you so much for the video. Can you download a version of the chart you were using? Where would I find one? Thanks again.
What can I say many years of welding and I did not know very much of what you said, you are an outstanding teacher, I am 79 years old and wish I had met you back in the 60's as many of us had to teach ourselves, however the junior colleges back then had fantastic trade schools, but rarely did we know about them, today the colleges seem to try and eliminate trades in favor of other subjects. Many years ago a mechanic or plumber in Russia made more money than a brain surgeon, I guess that is what our non-educators are trying to achieve today?
@@mrpaint055 If they're 30 years old and your guy just refills them without checking, he ain't doing his job. consumer propane bottles need to be inspected a minimum of 10 years after manufacture, and I doubt industrial/commercial equipment would be less stringent.
It is important to watch and learn from guys that indeed teach.There is one thing to know stuff ,completely different to put it into people's brains.Appreciation is given ,thanks guys
Tons of great info! Diesel mechanic here so I don’t use the torch too much, but it’s always been a grey area for me when I do. Used some of this info recently and it made my cuts so much better!
I know that I'm way late with this comment but I just ran across this video. I'm an old man now but I've learned several new things watching this video. I'm not a professional by any means but I've been using oxy/acetylene for the last 50 years and I was always told and under the impression that you always shut the acetylene off first. Please set me straight. Great video.
I wonder if this man is an instructor? He sure does an amazing job teaching people how to weld and explains all the dangers and really on top of safety! I have taken a couple welding classes and he even showed me a few tricks I never learned in school. Doing the dime demonstration for suction and the little trick of using a band with a worm gear attached to your tip with an angle as your guide is am damn smart Idea! Thank you so much sir for the tutorial. Amazing Job!
Thank you for being so detailed in your instructions. I’m moderately dyslexic so having as much info/details makes it easier for me to understand and follow instructions. I love your video. I’m now ready to cut metal with flame!
This is an awesome tutorial. I'm about to cut up $200 worth of 1/2" steel for a coal forge firepot, which for me is a substantial investment. So it's either use an angle grinder and take all month, or get out the oxy/acetylene torch. This is exactly, step by step, what I need to know since it's been a couple of years since I've cut with a torch and this is thicker stock than I've cut before. That hose clamp tip for distance and a straight line (31:00) is going to save me a lot of finish grinding and maybe even a re-cut, too! Thanks for the time and effort on this great teaching video.
I have taken a couple welding classes and we turn the fuel on 1st. light up. turn gas up or down till you get a nice clean flame. Then turn on oxygen till you get a nice small ideal flame for welding. When shutting down you reverse this operation. Oxygen off 1st and gas off last. This man did it perfectly as I been taught on day one how to weld with a torch. I absolutely love gas welding! One of my favorites for damn sure! been taught. After you turn the gas off it doesn't hurt to check or listen to any leaks in your tips. www.harrisproductsgroup.com/en/blog/2019/may/working-with-torches.aspx
When you said use the appropriate igniter a cigarette immediately jumped to mind cuz way back in the day my shop teacher told us all that if we decide to be welders we might want to take up smoking cuz it will come in handy lmao 😂
Nice job! All good information with some fun comments. I just spent two days cutting out 137 two-inch boiler tubes with a Harris scrappers torch, then switched to a Victor combo for cutting 113 tubes from the header seats, which was some high pucker since gouging of seats creates more work to repair. The items Red Beard covered are a good review in case I get sloppy on the safety issues. A little complacency can be a dangerous thing. Thanks a lot.
Connor linchet same I was looking for a comment about this because I was taught the same thing as you. He said O before A. Does anyone know for sure what is safer.
Flashbacks are almost always caused by the gas with more pressure going into the lower pressure line I.E. Oxygen into Acetelyne, because 9/10 times, it has the higher psi setting at the regulator. These steps should be code or made into OSHA S.O.P.
@@MR-nl8xr They are, technically. OSHA requires following the manufacturer's operating and safety instructions. I know for a fact that Victor, Harris, and Flametech all clearly state O before A in the manual.
Well done. “ Essential “ equipment mechanic sitting around the house quarantined to play it safe with the family. Combing the internet for informative videos work related. Nailed it. Oxygen lancing brought me here. Good stuff 👍🏻
For being a 45 minute long video just about oxy cutting Basics I have to say this kept me engaged the entire time and did not drag on in any way by the best video on the subject I've seen today to be honest keep up the good work
interesting, i didn't know that there's a vacuum effect happening at the tip, tips can be damaged pretty easily , would you agree that one should be using a dabbing motion instead of getting in there in a speedy saw maner with the tip cleaners ? good that i see you shut of the the oxy first and then acyetlene , uv/ ir is produced from oxy cutting, this is why it's important to wear shaded glasses , it may even be important to even where a full shaded face shield depending on the work being done. also good to see you back off the pressure screws and bleeding the lines, i think if you don't back of the pressure you can ruin the regulator and from time to time you'll see a regulator that doesn't display correctly .
Many like to put a schism between teachers of an art or science and those that perform those learned skills in the field. The best teachers are those that posses both, the education and experience. What is so daunting is that many don't give teachers full credit. Sir, you are both; thanks.
Proteus, I have one that’s made by Airco that I think is cast iron. It’s not stamped steel, it’s not to bad to use, it fits pretty good. But I still like an open end wrench the best.
How I was trained to use a cutting torch: Boss: "Here, fire this puppy up and cut those cables." Co-worker who wanted to go home in one piece that day: "Hey! Here's how to use a torch......" I wish we had videos like this back in the day!
amen brother. around here we use a cap for the cylinder we call tulip (...) is a hoop with a thread and is always on the cylinder protecting the valve if it falls in operation. excellent and so good you followed all safety measures, they are there for everyone but specially for the new guy. take care. pete.
@@GodslilRedneck23 oh yes we also put safety valves on both regulators outlet in case some idiot runs with a forklift over the hoses (or drops a big ass fire extinguisher over them true story) cutting them, the valve senses the excess flow and cuts flow in a pinch. were expensive but that time they saved a possible bad bad accident. ps thanks for the reply man. it´s so nice to know you guys are reading and interacting
"You need 3 things for a fire. heat, friction and a fuel source". I think you meant to say "Heat, Fuel, and oxygen". The lubricant being a fuel, and friction being the heat.. oxygen is self explanatory, you're breathing it. Lol
Yes. By far, the video has much more information to learn proper set-up, use, and disassembly. Even for those of us who've used cuttin' torches for years.
11:55 goddamnit Joe, we all blew up because you went to the bathroom with the damn wrench! This part made me stop the video just so I could go laugh and show my dad this part.
Hey everyone, thanks for watching. Make sure you Subscribe to the channel so you never miss an episode of weld.com. Make sure to hit the notification button to so that you'll get a notification every time we release new content. On behalf of the entire crew at weld.com thanks for the support.
Thank you for making such great informational videos. I have learned a great deal from you guys. Thank you for that.
Diesel D thanks for the support man 🤘🔥
@@dieseld4281 Thanks for watching.
Cool and very informative video!
Diesel D nice 👍
This is, by far, the best, most comprehensive Oxy-Acetylene torch tutorial I've seen! Thank you so much for all the effort that you all put into the video!
Thanks again,
Jon
Aaa
a
I totally agree 👍
I beg to differ
I cut and weld everyday at work and sometimes at home. Mostly 3/8" + thickness. I never even think about 90% of the stuff you describe. Thanks for the refresher course. Great video👍👍
DarkForce X glad we could help out.
God help us all we dont forget or we dont have coworkers that leave them on, god help us all that wont be me zombieing around forgetting shit open.
John Galvin for sure. We often forget the some basic shit
DarkForce X check out my TH-cam channel
Dont be that guy 😉
i have just purchased my first Oxy system. I have just spent the last few hours watching YT videos to see what to do and not to do. I will stop watching any more videos and just keep reviewing this on. The instructor does not just tell you what to not to do, but explains and shows. This is a great learning video.....My Emmy nomination
I've probably watched an hour of other torch videos and this one was, without a doubt, the most informative. I really respect the amount of pride you place in your career and it shows because of the amount of safety items you address. It was very "Mike Rowe"esk. We should always be as safe as we can be.
Like wise
This is absolutely one of the best tutorial videos I have ever watched. Great attention to details beginners (like me at 73) need. You ought to have, if you don't already, a cable TV show. Great teaching, not boring. things that a person who wants to learn will remember forever. Thumbs Up!!!
I was a farm boy welder/torch user who became a process engineer for 40 years. I always liked getting tips from my pipe fitters on welding and cutting. As I showed respect for their knowledge and skills, they always tolerated me watching them work. This presentation of proper torch use is right up there with the best tutorials I've ever seen. Outstanding job. As someone else commented: it must be THOSE guys who gave it downrates.
I just like this guy, the content was good, but the person showing it made it all the more enjoyable
That’s kinda gay, I like him too
brisson182 that’s a little gay, I think he’s alright.
Honestly you are one heck of a teacher,I have never seen nobody and I mean nobody break it down so comprehensively this way,it is just like you opened my head and poured everything in there and what makes it more interesting is your sense of humour,along with your explanation you poured in some jokes,I just felt like the session does not come to an end. I want to really say a big thank you for this priceless job that you did here, you are such a wonderful person .
The respect for the rules, safety and the equipment, the way you teach and the knowledge you have about this stuff is out of this world. You, you're good, you! Respect
As somebody who just acquired a cutting torch kit, this video is an awesome teaching aid so I don't accidentally "death" myself or someone else. I absolutely love the humor when teaching *serious* stuff. Thank you so much... greatly appreciated!
How have I never been told about the v-notch indicating reverse threads? Awesome video, thank you!
because it only turns up on gas fittings, not nuts and bolts
@@railgap its also used on the hot water line for a water cooled tig torch lol
@@railgap That's not entirely true, you'll see it on some other left handed hardware. But left handed hardware is rare.
I watched this video yesterday, woke up today, and BOOM, welding diploma was in my mailbox! LOL. Thanks for one of the best videos I have seen on the Tube. I don't even know how 45 mins went so fast. Great info, great presentation, and I chuckled quite a few times. And of course, I learned stuff. Awesome!
By far the best and most informative infomercial that I have ever seen. Thank you. The only two things I would add to this is one, no mention of a fire extinguisher close by, and two, make sure your pant legs are outside of your boots. I know this from personal experience. Thank you again
You're a great instructor Jason. I had a good welding instructor, so I knew *most* of this already, but you showed a few things I didn't know. Love the videos you guys make.
Been doing it wrong for 50 years, Thanks Kid!
most people have, kinda sad actually but eh
Watched a lot of torch videos, you are the only one to show fuel off last, as I was told a long time ago. You are a very good educator (don't take that lightly), your students will appreciate your wisdom for years to come. Thanks for these tutorials and your time.
Learn something everyday I have been told. I have been in the trade for many years and thought I would watch this video as a refresher. The part on rose buds was great! Did not know the volume of a acetylene cylinder played a part in the size of rose bud you can use. Thanks!
I have been using cutting torches for 30 years and you still taught me several things. Thank you. I will try not to be that guy anymore.
He got the fire triangle wrong, so with your experience in mind: I would split-the-difference.
I've been using an oxy acetylene rig for 46 years! Welding, brazing, cutting, and heating with a rosebud... was amazed at what I learned from this video!
“You don’t want to go through life with a dirty tip”. It’s great to see more of the welder’s humour in this video. This channel is usually a bit more “professional” than AvE, it I’m glad to see some jokes too. Great work folks!
a bit overplayed by the end imho.
By far the best video on beginning gas welding , cutting, that I’ve watched. Well done!!!
I have been welding for nearly 40 years, some of that time professionally and I STILL learned something new today. Thank you and I am now a new Subscriber.
One of the most comprehensive tutorials I have seen in years. Weld-done, and thank you for helping out the newbies; from blowing someone up.
Brand new working on welding and cutting (farm/ranch work). This is one of the most informative videos I've ever watched. I'll watch it several more times as I work on cutting. 'cause I do'nt want to be "that guy". Thank you very much Red Beard for being informative and educational !
Excellent video. I work for one of the major players in the industry and am always afraid of what people get into without proper education. This is well presented and full of solid information. 45 minutes well spent
You sir will be one of THOSE Instructors. The best of the best that everyone wants to learn from, and rightly so. I’m going to show my 15 yo son this, just to give me a little better piece of mind, when he just wants to go hang out in the shop.
Thanks for the hose clamp tip. Will have to give that a try.
Rambozo Clown it works great.
Your an excellent speaker and instructor!!! You gave a very clear and concise presentation!! Great job!
Thank you for explaining WHY on so many things, because it's easier for me to remember how something works than a procedure without context.
If you haven't been an instructor, you should consider it, because you absolutely nailed this. I expected to watch 10 minutes of mostly review when I had some downtime, and was glued to my screen to the end. I'm not a pro, but I have never seen anyone make such a clean cut with a torch.
I can help on the scarfing term a bit. In woodworking, a scarf is a long shallow bevel that can be used to join wood to make longer boards. The scarf tip looks like it was meant to cut long shallow bevels also.
It's been literally decades since I did any cutting. This was a great refresher as the guy that taught me was definitely not "safety first" - he was an old school oilwell welder and lived on crappy cigars, bourbon and risk. Very well done video! Liked and subscribed.
I don't have much oxy acetylene experience and only use my torch set a couple times a year so I probably need to watch this video before each use.
Thanks for yet another helpful video.
Kevin Lee good luck man, stay safe.
My son is getting ready to take courses in welding for the first time in his life. Your videos made everything easy to understand and you covered everything from setup, safety, OSHA to breakdown.
We don't want little regulators running around the shop , it ain't good 😂😂
Aaron Galindo check out my TH-cam channel
literally deathed my co-workers and myself upon hearing this
If the little regulators are shielding gas compatible, they could come in handy
THAT was NOT a waste of time. You covered things I needed to know and wanted to know without wasting time. Last time I used a torch was in high school. Wanted to get familiar with whtat I needed to do to be able to use a torch again. Great presentation. Thank you!
Absolutely EXCELLENT instructional video on O/A. The best I've ever seen. You cover a lot of points that are lacking on other videos (and by other instructors). Thanks a million.
I havent picked up a torch in 40 years. Just kind of remembered how my dad showed me. 15 minutes of refresher on flame adjustment and cut some bolts out of my truck frame. Thanks for the great video.
Excellent detailed instructive tutorial, I was aware of the dissolved acetylene and upright usage. But the big new to me was the Venturi effect on nozzle blockage, brilliant.
Thanks for sharing.
Bosted Tap glad we could shed some light. Thanks for watching.
Same here. Thanks
Just saved me a lot of frustration and tip cleaning.....I would have never thought even if I knew that that you could actually pick up a dime!
I started watching because of Bob but this guy is winning me over.
Masterpartyman thanks for the support man. Bob will be back soon.
Not because of Mr.TIG? LOL Dab. Dab. Dab. Dab. Dab. These guy's are so much enjoyable!
Lots of good tips. I got to looking at my torch (Airliner AW-200, AT605 Rosebud) instructions and wanted to add another note it said about the Rosebud;
"CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors. It may be necessary to increase outlet pressures to compensate for flow restriction that may be created by flashback arrestors."
Finally found someone that keeps me watching. Great tutorial and great tips for us beginners. Thank you
That trick using the hose clamp is a great idea. I made a couple burn bars a while ago after watching Bob do a video but while that has helped me cutting straight it doesn't help me keep the tip the proper distance from the work piece. Thanks for the video and suggestions.
One hell of an instructor, if you don't understand the procedures and the order in which to do them after watching this, you should not have a torch in your hand. Plain and simple.
Lots of good stuff you covered. I’m certainly no expert and I learned stuff I did not know. Thanks a lot.
after 5 or 10 videos yours is the best at showing and describing the appearance of a neutral flame. Thank you
This was an awesome, enjoyable, informative tutorial. I ESPECIALLY appreciated the safety tips throughout and at the end.
My stepmom had a friend & she got burnt kind of bad because someone greased the tank valve covers, I knew the lady after when she was around 90 years old, her husband (when he was alive) would tell her that she rebuilt the well drilling bits so nice he would have her do them instead of himself. :) I keep telling my wife how nice she cuts the lawn & such. :) I'm trying to be safer when it comes to all my building projects, now I'm almost 60, & got lucky few times but don't want to press my luck either. Thanks for the videos it's helping my to understand why I cut so bad. I'm looking forwards to giving it a try again, (after watching the video again).
Jason, you hit the ball out of the stadium with this one!!! I have watched many how to oxy/fuel films/videos ( that's how old I am) and your info is spot on, and you addressed the myths and misinformation....thank you so much... I think this should be shown in all Welding classes....was it long? Yes, but the info is there....and very clear. PS, I did hear a few minor terminology flubs, but nothing to change contents.... well done, from an old geezer and admirer of Weld.com...PB
Paul Brown thanks Paul. I appreciate your feedback and continued support of the channel.
I've probably watched an hour of other torch videos and this one was, without a doubt, the most informative.
Best of the best 50min class mannnn in few weeks I’m getting my diploma thas how you teach…. Explain knowledge THANK YOU 🙏
Did you get it
That was definitely a 45 min. seminar for Oxy-Acetylene thanks very much for all the informations included to this video, then watch again and again before use it, for a beginner. thanks dude
I recently ruined an acetylene regulator and thought it was either old age or bad gas. Now I know it was because I was on a roof and the bottle was on it's side so it couldn't fall over. I frequently lay them down and wedge them against a pipe stack so they can't roll off the roof since the roof is usually 3/12 or more pitch and a cart isn't going to work. Very informative video.
You’d be surprised all the sketchy shit you see out in the field.
@Wroger Wroger HVAC contractor 20+ years. Took all applicable classes/courses in our trade and none of our training ever mentioned 95% of what is in this video.
Red Beard dude you rocked on this instructional video. you were to the point. there was never any question on anything you were talking about and you had the kind of work attitude that people need to have on a daily basis at work along with some humor to make the day go by quicker thank you brother for the lesson
That was very good, by far the most thorough I have seen certainly on YT and even beats out the films we had in welding class.
You just taught an old dog some new tricks. Excellent video-should be part of the curriculum for vocational technical schools.
Amazing cutting video, been looking for one like this in the past weeks, jodi and bob taught me how to weld, and both made great oxy fuel videos. But this one hit everything in between, and all the specifics. Pun intended, Bob passed the torch to the right guys👍👍..also where can i get that chart card for oxy, also for mig/steel/ss?
wealth of good info here, been using a torch for years and I learned a bunch of things. all meat and potatoes, no fluff talk, worth every minute. Thanks for taking the time to do this, big help.
Awesome video, super comprehensive and entertaining. Thank you for taking the time to put this together!
Fantastic advice from start to finish and really appreciate the level of detail on safety. Hope you realise that you absolutely must have saved some person that has watched this from seriously hurting themselves along the way - good on you pal.
If you sharpen your soap stone on both ends, don’t sharpen on the same side. Make them opposite. This way no matter how the soap stone lays flat on the table, you can pick it up easily with heavy gloves on by pressing down on one end and the other end will pop up so you can grab it.
This is a great video I've been a local 475 steamfitters (Newark NJ) B book hvac technician for 26 years and learned something in this video
Nice job.
Just plain great education. Hope You stay on Weld.com but we also miss Bob. Regards to all of you.
I learned a lot of new things. Good instructor. He says all important stuff. Doesn't yammer on. Understandable, carefully thought out...now I'm yammering on.
Had no idea how many times I had put my life at risk! This is the information that I have been searching for and never had anyone around who understood it any better then I did. Thank you so much for the video. Can you download a version of the chart you were using? Where would I find one? Thanks again.
Found charts for my Victor torch by googling "victor acetylene torch chart" and then clicking on Images. Hope that helps.
What can I say many years of welding and I did not know very much of what you said, you are an outstanding teacher, I am 79 years old and wish I had met you back in the 60's as many of us had to teach ourselves, however the junior colleges back then had fantastic trade schools, but rarely did we know about them, today the colleges seem to try and eliminate trades in favor of other subjects.
Many years ago a mechanic or plumber in Russia made more money than a brain surgeon, I guess that is what our non-educators are trying to achieve today?
Thank you for having this talk. I just got my torch set. Helped me out big time.
My bottles are about 30 years old do they have an expiration date
Joe Briggs glad we could help out.
Mike Painter they are supposed to be hydrostatic tested every 10 years so I’d say you’re a little overdue man.
@@mrpaint055 If they're 30 years old and your guy just refills them without checking, he ain't doing his job. consumer propane bottles need to be inspected a minimum of 10 years after manufacture, and I doubt industrial/commercial equipment would be less stringent.
It is important to watch and learn from guys that indeed teach.There is one thing to know stuff ,completely different to put it into people's brains.Appreciation is given ,thanks guys
0:13 You kill just one co-worker and the boss won't shut up about it.
Oh! And the paperwork!
Better off not killing anyone. Unless its the safety officer, that's different.
Funny
How does he know that the boss won’t shut up?!
Hmm
You've never worked with some of my coworkers. My boss would actually thank me if I did accidentally 😃 yeah.
Tons of great info! Diesel mechanic here so I don’t use the torch too much, but it’s always been a grey area for me when I do. Used some of this info recently and it made my cuts so much better!
Thank you for sharing your expertise and all the details! God bless
I know that I'm way late with this comment but I just ran across this video. I'm an old man now but I've learned several new things watching this video. I'm not a professional by any means but I've been using oxy/acetylene for the last 50 years and I was always told and under the impression that you always shut the acetylene off first. Please set me straight. Great video.
You pointed out the importance of the check valves but, should every Oxy/Acetylene set up also have flash arrestors?
flash arrestors and check valves both.
I wonder if this man is an instructor? He sure does an amazing job teaching people how to weld and explains all the dangers and really on top of safety! I have taken a couple welding classes and he even showed me a few tricks I never learned in school. Doing the dime demonstration for suction and the little trick of using a band with a worm gear attached to your tip with an angle as your guide is am damn smart Idea!
Thank you so much sir for the tutorial. Amazing Job!
"it's welder proof"
That was pure gold.
Thank you for being so detailed in your instructions. I’m moderately dyslexic so having as much info/details makes it easier for me to understand and follow instructions. I love your video. I’m now ready to cut metal with flame!
V notches! Never knew about that identification
This is an awesome tutorial. I'm about to cut up $200 worth of 1/2" steel for a coal forge firepot, which for me is a substantial investment. So it's either use an angle grinder and take all month, or get out the oxy/acetylene torch. This is exactly, step by step, what I need to know since it's been a couple of years since I've cut with a torch and this is thicker stock than I've cut before. That hose clamp tip for distance and a straight line (31:00) is going to save me a lot of finish grinding and maybe even a re-cut, too! Thanks for the time and effort on this great teaching video.
"Dont Go Thru Life With A Dirty Tip"
Don't stick your dirty tip in someone's dirty orifice either.
So clean just the tip?
@@lincolnworsham1085 That's what she said.
I was searching for gas torch videos, but out of all the videos, your video is the best and the best information.👍
the 17 dislikes are "that guy" who got called out and thinks there's a difference between which bottle you turn off first. lol
Shut the fuel off first to keep a back burn from happening inside of the torch or hose
My dad always taught me oxygen first. Probably because it comes out a lot faster.
“A” before “O” or up you go
I have taken a couple welding classes and we turn the fuel on 1st. light up. turn gas up or down till you get a nice clean flame. Then turn on oxygen till you get a nice small ideal flame for welding. When shutting down you reverse this operation. Oxygen off 1st and gas off last. This man did it perfectly as I been taught on day one how to weld with a torch. I absolutely love gas welding! One of my favorites for damn sure! been taught. After you turn the gas off it doesn't hurt to check or listen to any leaks in your tips.
www.harrisproductsgroup.com/en/blog/2019/may/working-with-torches.aspx
@@sheilamclaughlin963 Jude Davis Sheila you are 100% right, flame goes out instantly fuel is shut off first.
I watched this video multiple times to get knowledge for thermal cutting in school thank you
When you said use the appropriate igniter a cigarette immediately jumped to mind cuz way back in the day my shop teacher told us all that if we decide to be welders we might want to take up smoking cuz it will come in handy lmao 😂
Nice job! All good information with some fun comments. I just spent two days cutting out 137 two-inch boiler tubes with a Harris scrappers torch, then switched to a Victor combo for cutting 113 tubes from the header seats, which was some high pucker since gouging of seats creates more work to repair. The items Red Beard covered are a good review in case I get sloppy on the safety issues. A little complacency can be a dangerous thing. Thanks a lot.
Very thorough, hoods off to ya!
Gary Papesh thank you Sir
I worked all my life in workshop but never knew some tips you explained. Thanks man. God bless you.
I was taught A before O or up you go
Connor linchet same I was looking for a comment about this because I was taught the same thing as you. He said O before A. Does anyone know for sure what is safer.
@@williamherd2575 same here, i was told O last on shut down to blow out all the A....was going to comment but thought maybe there was a better reason
William Herd i was told the same thing
Flashbacks are almost always caused by the gas with more pressure going into the lower pressure line I.E. Oxygen into Acetelyne, because 9/10 times, it has the higher psi setting at the regulator.
These steps should be code or made into OSHA S.O.P.
@@MR-nl8xr They are, technically. OSHA requires following the manufacturer's operating and safety instructions. I know for a fact that Victor, Harris, and Flametech all clearly state O before A in the manual.
I have been searching like a madman for answers regarding my rosebud. You answered it. Great video.
I've never seen a scarfing tip pretty kool
Rafael Sanchez they’re very handy for cutting out bad welds or making flush cuts.
Well done. “ Essential “ equipment mechanic sitting around the house quarantined to play it safe with the family. Combing the internet for informative videos work related. Nailed it. Oxygen lancing brought me here. Good stuff 👍🏻
Dang I wish I saw this video 6 years ago. Why do I have to learn everything the hard way!?
Me too
For being a 45 minute long video just about oxy cutting Basics I have to say this kept me engaged the entire time and did not drag on in any way by the best video on the subject I've seen today to be honest keep up the good work
interesting, i didn't know that there's a vacuum effect happening at the tip, tips can be damaged pretty easily , would you agree that one should be using a dabbing motion instead of getting in there in a speedy saw maner with the tip cleaners ? good that i see you shut of the the oxy first and then acyetlene , uv/ ir is produced from oxy cutting, this is why it's important to wear shaded glasses , it may even be important to even where a full shaded face shield depending on the work being done. also good to see you back off the pressure screws and bleeding the lines, i think if you don't back of the pressure you can ruin the regulator and from time to time you'll see a regulator that doesn't display correctly .
It's all infrared being produced when cutting which is only harmful to your eyes... same with plasma cutting I believe.
Many like to put a schism between teachers of an art or science and those that perform those learned skills in the field. The best teachers are those that posses both, the education and experience. What is so daunting is that many don't give teachers full credit. Sir, you are both; thanks.
I like having one of those black torch wrenches with my tools as a backup, but I wouldn't use it unless I had to.
Me too
Proteus, I have one that’s made by Airco that I think is cast iron. It’s not stamped steel, it’s not to bad to use, it fits pretty good. But I still like an open end wrench the best.
Complete tutorial nothing Left unexplained! Thanks for all this effort, from Africa, thanks!
How I was trained to use a cutting torch: Boss: "Here, fire this puppy up and cut those cables." Co-worker who wanted to go home in one piece that day: "Hey! Here's how to use a torch......" I wish we had videos like this back in the day!
There has been those vids for the last 25 yrs
That's how a lot of people are trained.... "Do this". Usually because the boss doesn't know the right way either.
amen brother. around here we use a cap for the cylinder we call tulip (...) is a hoop with a thread and is always on the cylinder protecting the valve if it falls in operation. excellent and so good you followed all safety measures, they are there for everyone but specially for the new guy. take care. pete.
p penca I’ve seen those. They should be mandatory but that’s just my opinion.
@@GodslilRedneck23 oh yes we also put safety valves on both regulators outlet in case some idiot runs with a forklift over the hoses (or drops a big ass fire extinguisher over them true story) cutting them, the valve senses the excess flow and cuts flow in a pinch. were expensive but that time they saved a possible bad bad accident. ps thanks for the reply man. it´s so nice to know you guys are reading and interacting
"You need 3 things for a fire. heat, friction and a fuel source". I think you meant to say "Heat, Fuel, and oxygen". The lubricant being a fuel, and friction being the heat.. oxygen is self explanatory, you're breathing it. Lol
You saved me a comment rant.
Take my like.
It’s now been enlarged from the fire triangle to the fire square ... mental
Yes. By far, the video has much more information to learn proper set-up, use, and disassembly. Even for those of us who've used cuttin' torches for years.
11:55 goddamnit Joe, we all blew up because you went to the bathroom with the damn wrench! This part made me stop the video just so I could go laugh and show my dad this part.