thanks mann.. your videos are really helpful.. i always try to do all the bike works myself. and you are a life saver especially since there are not much fz25 videos available. and you do it carefully and explains all the necessary steps. thanks a lot.
Thanks sir. The cable on my FZ25 was about to break, so I had time to buy a new one and find your video to install it. Again, thank you very much. I'm also seeing other tutorials for this bike on your channel, absolutely useful
My fz25 wheel is running after pressing the clutch if bike is in gear and saw this issue in two of my friends bike too. Could you please help me with this. I have already tried adjusting Clucth setting but no luck.
Hai pal, I am viwer of your videos, thank you for the sharing, I have question & Your Advice, Since, I am using fz25 2022 sep model, my bike crossed 4500+ kilometers, I am facing hard clutch issue and I am lubing properly gear shift and clutch liver cable ends after every water wash or if it is dry. And the clutch fee play also 90% adjusted from the clutch liver side and other end side also, I informed this hard clutch issues to the yamaha service center mechanic at the time of 2nd service vist to open the RHS side clutch casing and adjust the clutch CAM SCREW to give a free play for the clutch cable adjustable areas. But they didn't open the casing, they adjusted outside clutch cable remaining 10% of cable adjustments. And they said run the bike next 100 km and if there is any problem of hard clutch issue then you can come to the service to fix. My question is, How many kilometres fz 25 clutch plates are usable for City rides? (more clutch operation) Why they aren't opening the clutch case and adjusting? My current clutch operation is not too hard but it is hard my fingers are painful, what kind of adjustment should I do? Or any clutch plates are replace to fix this issue?
This issue is present in every FZ25. Plates should last anywhere around 40k but depend upon usage. Opening case doesnt going to work. You can check if wire is jammed then replace with new. It is what it is. Accept it.
Hello dear. Very informative video. I have a concern and i am sure you wd hv a logical and practical answer. Is the power/torque of this bike enough to ride in high altitude area with a pillion? I have now plans to go to Laddakh region. Does this effect bike's engine in someway if i take a pillion rider (70kg)? I am confused that should I go solo or allow a pillion with me? P.S. I have a 2019 model fz25
@@LifeofPal yes people have done but haven't seen anyone doing with pillion on this kind of bike. Jammu to leh may be a moderate level ride with pillion but Manali leh route has many high passes. I have seen struggling bike even with solo riders at some places.
Bro ..my throttle cable looks fine and I did some cleaning also but still within a week the cable adjustment goes off and it will be short clutch , is it cable issue or clutch ? Meaning : every week I’m adjusting but it’s becoming short clutch within a week
Could you please make a vlog on Carol baag market on purchasing KTM original indicator and then installing it on your bike , it would be quiet helpful .
@@LifeofPal ooh but you can make a video on Carol baag market on parts of fz25 as many youtubers are making , on led light ,projectors and all like that .
![[🔴LIVE] งานประกาศรางวัล MAYA TV AWARDS 2024 : มายามหาชน](http://i.ytimg.com/vi/nwmWYXXVwBY/mqdefault.jpg)
thanks mann.. your videos are really helpful.. i always try to do all the bike works myself. and you are a life saver especially since there are not much fz25 videos available. and you do it carefully and explains all the necessary steps. thanks a lot.
Thanks sir. The cable on my FZ25 was about to break, so I had time to buy a new one and find your video to install it. Again, thank you very much. I'm also seeing other tutorials for this bike on your channel, absolutely useful
Thank you brother i am glad its helpful.
You're doing amazing with these kinds of videos
Thanks bro, i Saw You from Perú.
Hi bhai
Suggest me some good quality perfect for FZ25
1. Handle bar raiser
2. Paniers and top box fixes.
3. Custom crashguard
Love your work
My fz25 wheel is running after pressing the clutch if bike is in gear and saw this issue in two of my friends bike too.
Could you please help me with this. I have already tried adjusting Clucth setting but no luck.
Not getting the original like soft touch cable nowadays
Thanks broooo
Hai pal,
I am viwer of your videos, thank you for the sharing,
I have question & Your Advice,
Since, I am using fz25 2022 sep model, my bike crossed 4500+ kilometers,
I am facing hard clutch issue and I am lubing properly gear shift and clutch liver cable ends after every water wash or if it is dry.
And the clutch fee play also 90% adjusted from the clutch liver side and other end side also, I informed this hard clutch issues to the yamaha service center mechanic at the time of 2nd service vist to open the RHS side clutch casing and adjust the clutch CAM SCREW to give a free play for the clutch cable adjustable areas.
But they didn't open the casing, they adjusted outside clutch cable remaining 10% of cable adjustments.
And they said run the bike next 100 km and if there is any problem of hard clutch issue then you can come to the service to fix.
My question is,
How many kilometres fz 25 clutch plates are usable for City rides? (more clutch operation)
Why they aren't opening the clutch case and adjusting?
My current clutch operation is not too hard but it is hard my fingers are painful, what kind of adjustment should I do?
Or any clutch plates are replace to fix this issue?
This issue is present in every FZ25. Plates should last anywhere around 40k but depend upon usage.
Opening case doesnt going to work.
You can check if wire is jammed then replace with new.
It is what it is. Accept it.
Bro...Any idea about clutch plate replacement?? Whether all friction plates are same? How many friction plates and steel plate??This kind of details
There are 6-7 plates three types
@@LifeofPal three types of friction plates?
Thanks buddy
bro can we install slipper clutch in fz25...??
Why? no need
Hello sir FZ version 2.O ka speed metre speed nahin dikha raha hai kya kiya jaaye uska
Service center le jaya jaye
Bro I need to align the fork of my fz 25.. Can u please help regarding this??
That is something not easy to help without physically checking. Better let mechanic handle that thing.
Nice
Hi bro dis adjustment is off clutch na is dis adjut is safe for clutch burn out....
Slight play must be there otherwise clutch can burn yes
Tnx fr ur reply....
Hi bro and thing m nt getting 0.07mm size filler gauge any idea....
nice thanks.. :)
Hello dear. Very informative video. I have a concern and i am sure you wd hv a logical and practical answer. Is the power/torque of this bike enough to ride in high altitude area with a pillion? I have now plans to go to Laddakh region. Does this effect bike's engine in someway if i take a pillion rider (70kg)? I am confused that should I go solo or allow a pillion with me?
P.S. I have a 2019 model fz25
People have already done leh on this bike. I will do it too with pillon.
@@LifeofPal yes people have done but haven't seen anyone doing with pillion on this kind of bike. Jammu to leh may be a moderate level ride with pillion but Manali leh route has many high passes. I have seen struggling bike even with solo riders at some places.
Bro ..my throttle cable looks fine and I did some cleaning also but still within a week the cable adjustment goes off and it will be short clutch , is it cable issue or clutch ?
Meaning : every week I’m adjusting but it’s becoming short clutch within a week
Hello
Bro fz250 ka clutch cable kaha available hey
Dukan pe
Could you please make a vlog on Carol baag market on purchasing KTM original indicator and then installing it on your bike , it would be quiet helpful .
Paisa nahi hai
@@LifeofPal ooh but you can make a video on Carol baag market on parts of fz25 as many youtubers are making , on led light ,projectors and all like that .
In how much km u replaced ur clutch cable
1st broke at 15k, 2nd at 7k. This is 3rd.