I've already trained shooting with other bb guns and now just bought this one last night too, but I believe bb guns are great for shooting cans when your all bored or hanging out with family just to see who shoots better!
For everybody watching this in 2021 or later, yes they increased the price on this. BUT, it is a new version so it’s not the same as the one showcased here. With the newer version, the overall build quality is better than before. This includes spring, trigger, magazine, and case quality. You can still find the older version in certain online and physical stores, but I recommend the newer version.
Thanks for the review!! I watched your video after I already bought one. I put mine through the Chrony at around its first 120 shots. After several hundred or a few thousand shots more of breaking in they tend to get more consistent with the velocities and may actually gain some FPS. Anyways, my measured velocities in feet per second with indoor temperature about 75 degrees with 50% humidity, and using Daisy zinc plated BBs with 10 shots Chronied: Fastest 202.2 Slowest 178.7 Average 188.71 Now bear in mind these pistols just cost in the $15 range (some people expect a Cadillac for $15 - NOT). Plus they only have enough power to dent the side of an empty beverage can and are in the same low power class such as a Daisy 188 (my old 188 is lower power), Marksman 1010 or 1020 (similar power), or Daisy 201 (more power). But they are still fun to plink with. I think you get a lot for $15. The plastic used seems very sturdy and has a neat take down feature. Cocks only on pulling out the slide and has its own slide return spring so no latch is needed. Safety is where the slide release normally goes on others and magazine release is where a cross bolt trigger safety would normally be. The magazine is a very cool feature and its reservoir actually holds about 250 BBs and the SPRING FED magazine holds 13, I believe. Yes, spring fed on a cheap gun!! ALSO this pistol is very unique for a springer as it has a separate firing mechanism which is independent of the spring piston power plant so you can manually cock the trigger via the hammer (metal !!) and get a feel for the trigger pull, which is quite decent, BTW, without actually cocking the mainspring. Plus you can uncock it by letting the hammer down - only if the mainspring hasn't been cocked by pulling out the slide which of course cocks the hammer, too. Now if it is all totally cocked, then the hammer can only be let down to a half-cocked position where the gun cannot fire. Unique!!! At least I think so. For a cheap gun or otherwise. And should mention that the trigger pull feels exactly the same whether you are firing with the mainspring cocked or just working the trigger mechanism only. END OF RAMBLE
Many years ago while on vacation in Florida I walked into a store and bought a BB gun just like that, a gun my father would never let me have. I was around 16 and I told my cousin Angela to promise she would not tell anyone. She promised and about 10 minutes later she told my father. I got to shoot it once.
Thanks man just bought one today at walmart had no clue about the specs but you answered all my questions and concerns also i think i paid 10 bucks for mine same model and all
I bought this in 2023 for approximately $20 off the Daisy website on SALE. I will concede the price should’ve tipped me off beforehand. I’m mid twenties so I wasn’t impressed - it was consistently inconsistent at 10 or 15 yards while fixed in a vice. Anyway, a Daisy 1938b - the red Ryder - is a great choice if you’re looking to plink around (even in an apartment). Plus, mods enable anyone to increase FPS and Ft/Lbs. This is just a personal take!
Hi bought this gun for my son. It shot great a few times then stopped. I took the gun apart and found the air piston plastic tube had cracked. The design flaw is the mechanical stop for the piston is off by about 1/16" and the result is the piston smashes against the plastic and cracks it. If the mechanical stop was adjusted correctly it would stop the piston right before it ram against the end. The piston tube needs to be made of metal or high quality plastic like glass filled nylon, not cheap ABS.
I'v now shot this gun enough to comment on performance: Great gun, it’s accurate and consistent. The sight wasn’t as bad as I thought. Was able to hit and shatter a small 8 oz retro-style coke bottle on my first shot from 50 feet away. Also able to hit targets out to 80 feet before the BB drop becomes heavily noticeable. Beyond that you need to shoot in a parabolic arch to hit things, but it can still reach out pretty far. I guess this shoots the advertised “100 yards” at 45 degrees?
@Travipattie wow, I forgot about this comment from 9 years ago.. feels like a long time ago! Since then I got involved with real firearms, and have a nice collection at this point. I still remember this BB gun, it was one of my first. Yeah, it was nice for the cost. I had a lot of fun with it.
hobbyjon...I know most people probably know this like elementary math, but thank you for posting this! A friend gave me this make/model and for the life of me I could not figure out how to load the bb's! probably get some flack for my comment, but thanks again I really appreciate you taking the time to post this!
not a bad starter BB gun, GF is a fan of the Beretta design, and it's a good way for her to pick up on the hobby, set up some cans in the backyard, It's pretty fun.
I bought one just for fun and can't put it down. It holds enough ammo for plenty of shooting and if you get the occasional jam you do not need tools to strip it. It's not very accurate or powerful but will shoot clean through a full milk carton or through one side of a full plastic milk bottle, empty bottles the BBs bounce off. 👍
my 340 i wish had hop up like they do in airsoft, this one because of its 240 fps it tends to drop quickly after 20 ft, if they had just a bit of barrel hop we could get this budget bb gun out to 30 ft or more on a 240 fps velocity, glad daisy makes 20 dollar bb guns anyway, they are nice to collect
When I got mine, the instructions looked different from yours. It showed that the safety was on the side. Another thing, that I regret doing is PURCHASING THIS GUN FOR $25!!! If I knew it was $15, I would've just bought that one. You live and you learn I guess.
I got mine for $10 about a week ago, it ain't bad really. Its a good BB gun for starters, I have a Crosman 2100 classic bb rifle at my dad's place and I think they shoot pretty good.
This gun can be made to get 340 fps and its a lot more accurate . The gun can broke down more than you took it . At the rear sight on the under side you will see a plastic piece that fits into the main spring that gives it it's power . the spring is in its own housing this housing has a raised flat piece on both sides ,what you do is push the spring forward with a screwdriver and with a pair of pliers squeeze the two raised pieces that are on both sides closer together ,then pull up on the screwdriver and the back part will be free from its undercut ,then slide back the spring housing to the this will disengage the front part from its under cut slot . you have to keep pressure on the screwdriver so the spring won't come out of the housing because the only thing holding the spring in place was the plastic on the gun it's self so once its raised up it can spring out . Once its out change the toy spring to a manly spring to get around 340 fps and this increases it's accuracy . Once the spring housing is out the rest of the gun parts can be removed like the barrel ect . Another easy way to get more power is to compress the spring . Add washers between the plastic plug and the spring . The more washers you add the more powerful it becomes .Its causes the spring to be closer together and when its cocked back and then released it puts more forward movement faster onto the piston . If you don't want to take the gun apart but want a little more power just put your pliers in between the main spring and pry the spring apart from one end to the other this will make the spring move forward faster once its pushed back . The spring that's in there is very cheap and its the main reason you get a 30 fps difference in shots . Once a good spring is in there its a lot more consistent and can be with in 5 fps shot after shot . the spring is 4 3/4 long out side dia is 29/64 and inside dia is 24/64 . the wire is 2/64 . and it has 20 twist's So get a longer one or better quality thicker wire . At first I stretched the spring out to 6 inches making each coil have equal spacing . It make it so the bb would go out to 20 yards with a pretty good ting on the metal wheel barrel . Its good enough to make a possum or racoon think about getting into your trash can again ,at least for a few hours any ways .Stretching the spring didn't last very long and after a few thousand shoots the bb's started dropping again so I took it apart and checked the spring length and it was back to 4 1/2 inches its original size . In stead of just stretching it back out I went for a better spring . I went with a slightly bigger gauge wire and keep the out side dia the same because it has to fit into the metal piston . and just forced it into the plastic plug at the other end I think it was the next size up like a 3/64 size 1/64 is a big jump as far as wire goes and the force it takes to spring it . I also went with a longer over all length ,I think it was 6 inches . It was a lot harder to push in and hold into place and push the spring housing back into place . I think I added about 100 fps to the 240 it was before .
Update, hobbyjon: I don't know where or when or if you bought yours for $15, but Dick's Sporting Goods in northern California, Aug. 2015 is selling the Powerline 340 for $25. Thanks for the post.
I'm very new to BB guns but i see u are very professional I dont yet have any equipment but im planning to get some soon and maybe watch some of your videos you seem to know what to do and how to hold and aim a gun so imma subscribe
As a proud owner I would say 1. Magazine cap is around 11 and lower 2. Slide is a bit un sturdy but prime weight is easy 3. Gun is lightweight 4. Don't drop in grass or anything like dirt bc when u fire it will shoot out dirt too 5. Using copper 4.5 metal bb's I got close to 300 fps 6. If you can get it for under 20 dollars I'd get it
that's a good piece of kit its cheap looks great perfect for shooting indoors and outside. the only criticism is double feeding its very important to recognize if you failed to cock the action you must remove the magazine or you you could get a jam and that's not good.
I always but those cause i have a backyard pistol war and contests so i always buy them cause they dont jam as easy as most co2 powered handguns which i buy also but good video man keep up the good work 👍👍👍👍
Not bad for the price. I just saw this at my Walmart for only nine dollars.amazing. thanks for the review I definitely appreciate it. How's yours holding up?
i only got to shoot mine a few times, then it started to only dry fire, didnt release a bb. i actually really liked it,but then it started to act like it had no power...
+Jays world I don't think this one came with ammo, some kits do. I buy Daisy brand zinc plated BB's. For me it is not hard to pull back, unless my fingers are greasy. Thanks for watching.
It helped me find out how to load the gun !...It's great to keep the unwanted away from my bird feeder,it won't kill them ,but they know to stay away....Thanks !!!
i bought this for $10.81 (tax included) at Wal-Mart 😁👍 ..well worth it! Thanks for uploading this video. The manual instructions weren't helping any at all lol, your instructions were far more helpful
Just got this gun. The only thing I don't like is the sight, the rear sight is too wide and does not line up with the front sight - too much wiggle room right and left. This can be fixed with a simple mod to the rear sight imo.
@hoobyjon, mine didnt work its as it was broken. I followed all your steps, cocked it back and it didnt fire the bb. I made extra sure it was ready to fire.
+Kevin Rodriguez Depends on you. If you get it for a good price, my opinion is that it is worth it. I hope some others chime in as well. It sure is nice you don't need Co2. Thanks for watching.
Xx FledglingBard58 xX Nope it is junk. I had two of them. None of them last a full magazine. The 1st shot was ok , but it did not last for long at all. Keep your money and get a Beeman P17.
i know this was made a long time ago, but i just got one and mine only fires sometimes, like a random, i follow all the steps and it wont fire, but then i could try again and it will, help? edit: i just wasn’t doing it hard enough
I notice a lot of the barrel dose not show on top (most the slide covers it) unlike in a real m9. is there some birettas that have the same slide as this?
There’s a little mechanism just in front of the safety, I have no clue what’s that for. The instructions nor you video comment on it, does anyone know?
Nah mine is spring and was only $10 it's a good starter for someone new to bb guns like a kid but a doesn't really match up to my others. But it's good
Damn i thought it was cool untill i found out you have to pull back the slide every single time to load a new round into the chamber i love the Beretta M9.
Just under the barrel, above the trigger, there's a small spring that comes out on the right, after you release the lock on the left. What is that for? Also, do you have to pull it back to cock it every time that you want to fire it? Thanks!
Is it safe to dry fire a lot. I bought this for my nephew and it didn't come with bb and all he is doing right now is dry firing. I just don't want it to be a bite in the ass when he gets to shoot it because he broke it.
Well I got this Bb gun and for some reason it stopped shooting nothing comes out and I don't understand why? And sometimes the Bb comes out but with no force it just like falls out do you happen to known why?
Hi, I am new to bb guns and I am looking to buy this. I am 13 years old and not the strongest 13 year old. My question is how hard is it to prime? I have a old bb gun from the early 2000's and it is really hard to pull back the slide to prime. Thanks.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
I've already trained shooting with other bb guns and now just bought this one last night too, but I believe bb guns are great for shooting cans when your all bored or hanging out with family just to see who shoots better!
Debra Cruz Yes, I agree completely. You need to make a video and show who is the best shot. Thanks for watching.
Debra Cruz you’re*
idiots on here missing the point, $15!!! no CO2 needed, well done Daisy
+𝓓𝓇𝒾𝒻𝓉 𝓩𝒶𝓚𝒶 you have the worst comebacks.
+𝓓𝓇𝒾𝒻𝓉 𝓩𝒶𝓚𝒶 you have the worst comebacks.
Drift ZαKα wow that escalated even though he wasn't specififing you and you felt offended somehos
i got it for 12 ;-;
Xeyz I got mine for 10
Lost the manual and left the bb on the shelf a few years, this helped me load the bb's in the magazine. Thank you
For everybody watching this in 2021 or later, yes they increased the price on this. BUT, it is a new version so it’s not the same as the one showcased here. With the newer version, the overall build quality is better than before. This includes spring, trigger, magazine, and case quality. You can still find the older version in certain online and physical stores, but I recommend the newer version.
Is this guy serious.... Gloves and a rest.. hardcore
Empire Minis I mean he murders birds so he's In americas top 3 kill list for bird murders man legends say he's still murdering birds till this day
Empire Minis walks down the street brandishing this by his side saying,back the fuck up!
LOL
Don't want them fingerprints ya knoe
Im pretty sure hes just using it for aiming
Thanks for the review!! I watched your video after I already bought one. I put mine through the Chrony at around its first 120 shots. After several hundred or a few thousand shots more of breaking in they tend to get more consistent with the velocities and may actually gain some FPS. Anyways, my measured velocities in feet per second with indoor temperature about 75 degrees with 50% humidity, and using Daisy zinc plated BBs with 10 shots Chronied:
Fastest 202.2
Slowest 178.7
Average 188.71
Now bear in mind these pistols just cost in the $15 range (some people expect a Cadillac for $15 - NOT). Plus they only have enough power to dent the side of an empty beverage can and are in the same low power class such as a Daisy 188 (my old 188 is lower power), Marksman 1010 or 1020 (similar power), or Daisy 201 (more power). But they are still fun to plink with.
I think you get a lot for $15. The plastic used seems very sturdy and has a neat take down feature. Cocks only on pulling out the slide and has its own slide return spring so no latch is needed. Safety is where the slide release normally goes on others and magazine release is where a cross bolt trigger safety would normally be. The magazine is a very cool feature and its reservoir actually holds about 250 BBs and the SPRING FED magazine holds 13, I believe. Yes, spring fed on a cheap gun!!
ALSO this pistol is very unique for a springer as it has a separate firing mechanism which is independent of the spring piston power plant so you can manually cock the trigger via the hammer (metal !!) and get a feel for the trigger pull, which is quite decent, BTW, without actually cocking the mainspring. Plus you can uncock it by letting the hammer down - only if the mainspring hasn't been cocked by pulling out the slide which of course cocks the hammer, too. Now if it is all totally cocked, then the hammer can only be let down to a half-cocked position where the gun cannot fire. Unique!!! At least I think so. For a cheap gun or otherwise. And should mention that the trigger pull feels exactly the same whether you are firing with the mainspring cocked or just working the trigger mechanism only.
END OF RAMBLE
Thanks for the review.
At my local Walmart they are only $9.95!
dylanc mine too
Same.
Where I live airsoft guns prices are raised so I buy them on line. The airsoft guns at my Walmart this one costed 49.99
mine was 10
same and i bought it
Great price for a .177 bb. There’s ways of making them more powerful too, such as stronger spring etc & dieseling the barrel.
You're very professional. Just the way of your knowledge and how you handle guns. I just bought mine yesterday! You got a scribe, sir.
CatsRevenge i got mine tonight for 10 dollars
Many years ago while on vacation in Florida I walked into a store and bought a BB gun just like that, a gun my father would never let me have. I was around 16 and I told my cousin Angela to promise she would not tell anyone. She promised and about 10 minutes later she told my father. I got to shoot it once.
You should never trust her again.
@@Adel_Volks I haven’t seen her in over 50 years. Her parents moved to Florida and we lost contact.
Actually it's $9.87 on Amazon.
Mik100 now its 20
Yea but he said st walmart dumb ass
Ong
And walmart.com
@Bill Cosby 18056377743
I got that gone at Walmart for 9.15 and when I first shot it, it was great second time it stopped working.
Karolina Ortiz wtf lol
He said “more on”. I subscribed!!
Shannon Swinton noice
Thanks man just bought one today at walmart had no clue about the specs but you answered all my questions and concerns also i think i paid 10 bucks for mine same model and all
Thanks for your video I was almost braking my bb not knowing how it works and you explained it so easy
Daisy sold me a DOA gun.
I emailed Daisy and got No Response. 80.00 Plus shipping in Trash!
Thanks Daisy!
I bought this in 2023 for approximately $20 off the Daisy website on SALE. I will concede the price should’ve tipped me off beforehand. I’m mid twenties so I wasn’t impressed - it was consistently inconsistent at 10 or 15 yards while fixed in a vice. Anyway, a Daisy 1938b - the red Ryder - is a great choice if you’re looking to plink around (even in an apartment). Plus, mods enable anyone to increase FPS and Ft/Lbs. This is just a personal take!
Hi bought this gun for my son. It shot great a few times then stopped. I took the gun apart and found the air piston plastic tube had cracked. The design flaw is the mechanical stop for the piston is off by about 1/16" and the result is the piston smashes against the plastic and cracks it. If the mechanical stop was adjusted correctly it would stop the piston right before it ram against the end. The piston tube needs to be made of metal or high quality plastic like glass filled nylon, not cheap ABS.
I'v now shot this gun enough to comment on performance:
Great gun, it’s accurate and consistent. The sight wasn’t as bad as I thought. Was able to hit and shatter a small 8 oz retro-style coke bottle on my first shot from 50 feet away. Also able to hit targets out to 80 feet before the BB drop becomes heavily noticeable. Beyond that you need to shoot in a parabolic arch to hit things, but it can still reach out pretty far. I guess this shoots the advertised “100 yards” at 45 degrees?
Thanks I didn’t know if it was worth it because it’s cheap and mixed reviews
@Travipattie wow, I forgot about this comment from 9 years ago.. feels like a long time ago! Since then I got involved with real firearms, and have a nice collection at this point. I still remember this BB gun, it was one of my first. Yeah, it was nice for the cost. I had a lot of fun with it.
@@BertieW0oster I just recently got into guns I have 243 for hunting but that’s it
hobbyjon...I know most people probably know this like elementary math, but thank you for posting this! A friend gave me this make/model and for the life of me I could not figure out how to load the bb's! probably get some flack for my comment, but thanks again I really appreciate you taking the time to post this!
Is this a fake pistol or real?
Does it have to be a license
Please help me
not a bad starter BB gun, GF is a fan of the Beretta design, and it's a good way for her to pick up on the hobby, set up some cans in the backyard, It's pretty fun.
Great video I was looking at this BB gun as a cheap shooter,and it seems decent for the price.
I bought one just for fun and can't put it down. It holds enough ammo for plenty of shooting and if you get the occasional jam you do not need tools to strip it. It's not very accurate or powerful but will shoot clean through a full milk carton or through one side of a full plastic milk bottle, empty bottles the BBs bounce off. 👍
When it gets stuck, how do you manage to unblock it? I'm thinking of getting one!
Sir im frm india pls tell me
This gun witch part is metal or witch part is plastic & this gun is durable or not
I have it it's real good for starting hard to pull the thing back but it gets easy when you do it a lot
Wonderful firearm. Perfect for quick response early readiness.
For what? A bird attack?
my 340 i wish had hop up like they do in airsoft, this one because of its 240 fps it tends to drop quickly after 20 ft, if they had just a bit of barrel hop we could get this budget bb gun out to 30 ft or more on a 240 fps velocity, glad daisy makes 20 dollar bb guns anyway, they are nice to collect
When I got mine, the instructions looked different from yours. It showed that the safety was on the side. Another thing, that I regret doing is PURCHASING THIS GUN FOR $25!!! If I knew it was $15, I would've just bought that one. You live and you learn I guess.
I got mine for $10 about a week ago, it ain't bad really. Its a good BB gun for starters, I have a Crosman 2100 classic bb rifle at my dad's place and I think they shoot pretty good.
This gun can be made to get 340 fps and its a lot more accurate . The gun can broke down more than you took it . At the rear sight on the under side you will see a plastic piece that fits into the main spring that gives it it's power . the spring is in its own housing this housing has a raised flat piece on both sides ,what you do is push the spring forward with a screwdriver and with a pair of pliers squeeze the two raised pieces that are on both sides closer together ,then pull up on the screwdriver and the back part will be free from its undercut ,then slide back the spring housing to the this will disengage the front part from its under cut slot . you have to keep pressure on the screwdriver so the spring won't come out of the housing because the only thing holding the spring in place was the plastic on the gun it's self so once its raised up it can spring out . Once its out change the toy spring to a manly spring to get around 340 fps and this increases it's accuracy . Once the spring housing is out the rest of the gun parts can be removed like the barrel ect . Another easy way to get more power is to compress the spring . Add washers between the plastic plug and the spring . The more washers you add the more powerful it becomes .Its causes the spring to be closer together and when its cocked back and then released it puts more forward movement faster onto the piston . If you don't want to take the gun apart but want a little more power just put your pliers in between the main spring and pry the spring apart from one end to the other this will make the spring move forward faster once its pushed back . The spring that's in there is very cheap and its the main reason you get a 30 fps difference in shots . Once a good spring is in there its a lot more consistent and can be with in 5 fps shot after shot . the spring is 4 3/4 long out side dia is 29/64 and inside dia is 24/64 . the wire is 2/64 . and it has 20 twist's So get a longer one or better quality thicker wire . At first I stretched the spring out to 6 inches making each coil have equal spacing . It make it so the bb would go out to 20 yards with a pretty good ting on the metal wheel barrel . Its good enough to make a possum or racoon think about getting into your trash can again ,at least for a few hours any ways .Stretching the spring didn't last very long and after a few thousand shoots the bb's started dropping again so I took it apart and checked the spring length and it was back to 4 1/2 inches its original size . In stead of just stretching it back out I went for a better spring . I went with a slightly bigger gauge wire and keep the out side dia the same because it has to fit into the metal piston . and just forced it into the plastic plug at the other end I think it was the next size up like a 3/64 size 1/64 is a big jump as far as wire goes and the force it takes to spring it . I also went with a longer over all length ,I think it was 6 inches . It was a lot harder to push in and hold into place and push the spring housing back into place . I think I added about 100 fps to the 240 it was before .
You should make a video about all that. It would be nice to see everything you write about.
Won't that stronger Manley spring make it harder to cock? How the plastic pieces hold up after that extra strain on em?
I had one of these and I accidentally broke it by pulling back on the slide to many times. I'm not calling the gun bad, I just want to share a story.
Update, hobbyjon: I don't know where or when or if you bought yours for $15, but Dick's Sporting Goods in northern California, Aug. 2015 is selling the Powerline 340 for $25. Thanks for the post.
lol, I was thinking the same thing, except I'm in Philly, and ordered mine from dicks sporting goods
I'm very new to BB guns but i see u are very professional
I dont yet have any equipment but im planning to get some soon and maybe watch some of your videos you seem to know what to do and how to hold and aim a gun so imma subscribe
Nahhh bro wit the 200 round mag damn homie finna spin the block
As a proud owner I would say
1. Magazine cap is around 11 and lower
2. Slide is a bit un sturdy but prime weight is easy
3. Gun is lightweight
4. Don't drop in grass or anything like dirt bc when u fire it will shoot out dirt too
5. Using copper 4.5 metal bb's I got close to 300 fps
6. If you can get it for under 20 dollars I'd get it
No slide stop?
that's a good piece of kit its cheap looks great perfect for shooting indoors and outside. the only criticism is double feeding its very important to recognize if you failed to cock the action you must remove the magazine or you you could get a jam and that's not good.
it wears out pretty fast ,good for small kids
Got to keep it clean mines going 5 years strong
Thank you for this. Didn't realize it wasn't hammer driven and felt stupid for 20 minutes trying to cock it by hammer only.
thank you! I couldn't find any bb guns that are spring-loaded because all of them in my area seem to be CO2 powered.
Thank you. I lost my instructions. Apparently it was jammed. It works now
Thanks for the reload tutorial, I was having some trouble with mine! :-)
Dirk The Daring same
I couldn't get the little speed loader thing out
I always but those cause i have a backyard pistol war and contests so i always buy them cause they dont jam as easy as most co2 powered handguns which i buy also but good video man keep up the good work 👍👍👍👍
Not bad for the price. I just saw this at my Walmart for only nine dollars.amazing. thanks for the review I definitely appreciate it. How's yours holding up?
i only got to shoot mine a few times, then it started to only dry fire, didnt release a bb. i actually really liked it,but then it started to act like it had no power...
Same thing happened to me that's why I switched over to CO2 powered BB guns
Also is it hard to pull back
+Jays world I don't think this one came with ammo, some kits do. I buy Daisy brand zinc plated BB's. For me it is not hard to pull back, unless my fingers are greasy. Thanks for watching.
I got one of these for my 10 year old son. It is a little hard for him to pull back, but he has just kept practicing and he has improved.
I think the right word is damn near impossible
Stocking Anarchy that was 3 words to be exact
Jays world not at all
When u shoot it does it give force
minimal
I see you everywhere.
No
I did everything you did, when I shoot no bb came out
Probably didn’t cock back far enough gotta hear an extra click it’s a little hard to pull back fully
i own one there pretty good they went straight through some of my targets clean
really?
+Stocking Anarchy yes I shot some peanut butter cups went clean through
DawnStar Cool
my father gave me a Daisy Powerline 1700, but he didn’t have the manual, so I’m wondering where the safety is?
It helped me find out how to load the gun !...It's great to keep the unwanted away from my bird feeder,it won't kill them ,but they know to stay away....Thanks !!!
i bought this for $10.81 (tax included) at Wal-Mart 😁👍 ..well worth it!
Thanks for uploading this video. The manual instructions weren't helping any at all lol, your instructions were far more helpful
Just got this gun. The only thing I don't like is the sight, the rear sight is too wide and does not line up with the front sight - too much wiggle room right and left. This can be fixed with a simple mod to the rear sight imo.
@hoobyjon, mine didnt work its as it was broken. I followed all your steps, cocked it back and it didnt fire the bb. I made extra sure it was ready to fire.
Is the gun worth buying it before I buy it on amazon?
+Kevin Rodriguez Depends on you. If you get it for a good price, my opinion is that it is worth it. I hope some others chime in as well. It sure is nice you don't need Co2. Thanks for watching.
For sale at Walmart for $15.00.
I killed a rat with one.
Injured it. And hit it about 4 times. lol #TrueStory
I really like mine.
Thanks for the video, @hobbyjon, I forgot how to reload it and needed to show my husband.
Xx FledglingBard58 xX Nope it is junk. I had two of them. None of them last a full magazine. The 1st shot was ok , but it did not last for long at all. Keep your money and get a Beeman P17.
i know this was made a long time ago, but i just got one and mine only fires sometimes, like a random, i follow all the steps and it wont fire, but then i could try again and it will, help? edit: i just wasn’t doing it hard enough
My Speedloader tab does not latch out or back in as the instructions say ? Was there a change ? Any comment please. Thank you.
I just got one I love it my first slide action bb pistol. It's got all da swag
I got one of these today and it was so much fun shooting are targets my cousin loves it!And yes we got it at walmart for 10 bucks SO CHEAP!
9 years later it's now 31$
Really cool video I saw this gun at the store and wanted to buy it wasnt sure about it though.
Same one I got and I love your video!!!
is there a B.B. Gun with the same bulletin magazine but uses co2 instead of spring loaded? Thanks
Bro why you put it in safety every time you prime it it's a goddamn BB gun
Castic Films ikr that was kinda annoying me
Because its a good practice. It can still put an eye out. Muscle memory.
I was curious about that too. I'll bet he's still wearing a mask, too. Safety gloves? Really?
I payed 21.68 at bass pro shops for mine just a week ago ... haven’t tried it out yet tho
I notice a lot of the barrel dose not show on top (most the slide covers it) unlike in a real m9. is there some birettas that have the same slide as this?
no. the m9 seires have light recoil springs so the slide weight matters a lot. i don't think anyone custom does this slide either.
It sure did help me because i was getting frustrated with the gun
You don't seem to have any trouble with it, maybe it's the gloves, but mine is seriously difficult to pull the slide back.
I bought new never even loaded the 340 the slide cannot be cooked, any suggestiins.
There’s a little mechanism just in front of the safety, I have no clue what’s that for. The instructions nor you video comment on it, does anyone know?
This doesn't take c02 right?
Jdogg7565 yea
No
No dude I have one and its spring
No it does not take c02
Nah mine is spring and was only $10 it's a good starter for someone new to bb guns like a kid but a doesn't really match up to my others. But it's good
what the hell mine was 21$ lol
Mine was 25$
Mine was $9.68 at walmart
ExtraProductions90 mine was $45
Mr. Dankster Mine too lol
9.87 on Amazon rn
At your local gun store in Baton Rouge you can get it for $19.99
should I have not bought 2 of these they come in from Wal-Mart in a few days I want to know if it's worth the money
Thank you, thank youu !!! I almost.returned it but i was missing a step.
Would this be fine if I just wanted it for a prop? For like a costume?
Yes, just make sure you paint the tip orange if you have it in public.
I would like to use this pistol scare squirrels away, not kill them is that possible?
Thanks for your answer
Damn i thought it was cool untill i found out you have to pull back the slide every single time to load a new round into the chamber i love the Beretta M9.
Getting one tomorrow!! Thank you!!!
Do the loaded BBs have to line up in the magazine for it to shoot? This thing is making me tear my hair out...
Can you used .177 caliber pallet idk it does not work
Just under the barrel, above the trigger, there's a small spring that comes out on the right, after you release the lock on the left. What is that for? Also, do you have to pull it back to cock it every time that you want to fire it? Thanks!
It was very helpful I was having trouble with the loading terns out the latch was stuck
I am also getting it today my friends
How does it works?...bullets or anything?
does the gun take Crosman Copperhead .177 Caliber BBs please reply someone
Can you recommend where I can send my Daisy Powerline 92 for repair? (Leaking CO2)
Used to have a shotgun BB gun back in the days when i was 7...
Yeah right.
ok123 you have the worst channel
Good tutorial
Is it safe to dry fire a lot. I bought this for my nephew and it didn't come with bb and all he is doing right now is dry firing. I just don't want it to be a bite in the ass when he gets to shoot it because he broke it.
Can you help me?I have the same gun but today it started not shooting far and weak so now it wont even shoot 8 feet Please help
can this use pellets? the walmart guy sold me some saying it would doesnt seem like it they are crosman .177 8.5gr 4.5mm
Helped me thanks I got this gun today!!
Well I got this Bb gun and for some reason it stopped shooting nothing comes out and I don't understand why? And sometimes the Bb comes out but with no force it just like falls out do you happen to known why?
I have the same problem...
Why do you use the safety every time you prime the gun?
+S4MP3PP3R PR4NK5 & M04R its required or the gun will not allow you to pull the clip to load the BB
Hi,
I am new to bb guns and I am looking to buy this. I am 13 years old and not the strongest 13 year old. My
question is how hard is it to prime? I have a old bb gun from the early 2000's and it is really hard to pull back the slide to prime. Thanks.
+Jack Fetzer I think you'll be just fine
The employee there gave my .177 lead pellets, will it shoot those or should I get BBs
Thank you it helped us old people just to load the magazine
Is it a spring loaded gun, or can it shoot repeatedly after cocking it the first time?
What’s the ammo called? I got that gun but can’t find what type of bb I need to get
Is this a good one