I had to laugh because I replaced the engine in my 2010 Tahoe recently, and I bought the exact same engine hoist and stand as you put together at the beginning of this video. It all seemed so familiar!
I'm a bit jealous of that climate, everything looks like it just rolled off the line, up here in the salt belt everything is just falling to dust, our rigs rust out before the engine shits... Usually lol
Well u guys made this super easy for me I kinda figured it wouldn’t be rocket science might take a me a few since it’s just my self can’t wait to get my ls in my obs
Had to replace the engine in my Volkswagen Jetta. A lot of people think changing an engine is hard, but honestly it’s pretty simple…..just super time consuming.
Very cool!! I’m assuming that was a used engine replacement? What condition was it in? Did it come with a warranty, just in case? Any improvements over the original engine?
It was a direct replacement. The only "improvement" is that I installed fresh gaskets and parts to it. I think it had a 30 day warranty off of eBay. Could probably buy one from the local salvage yard for cheaper.
I have a 08 Escalade that spun a rod bearing. Swapped the motor out from a used parts shop and truck won’t start now. Any idea on where to start looking?
These 4.8s in these trucks for the years are a bit difficult to find for a direct swap, so I had to buy it off of eBay. I think I paid $1200. The swap took a week to do. If I dedicated all day for several days, it could take 1-2 days, especially with a friend and the right tools.
you should do the dod delete in the ecm i got 221000 miles with no problems other them when i turn it up it breaks the rearend or the driveshaft them 10 bolts are just junk but good video man
@@AutoMotivate 4.8 just a different stroke from what I recall, definitely the motor to have for this gen. Does 30 hp really matter in a big SUV that isn't a sports car?
I bought a replacement 5.3 motor for my Sierra I have a 2011 and it’s a 2013 replacement vin code is 7 original motor is three days they are direct fit. Question is should I use the computer on the new harness or can I keep my old one in ?
Sooo I want to swap my 5.3 out for a 6.2 in my Yukon and I’m no mechanic so would it still be just a basic swap as in snatching old motor out and replacing it or would I have to change something else
How do you match the engines, to know what will be a direct replacement when buying a used engine specifically? If the vehicle the motor comes from a different model, can that have differences in say wiring harnesses for example where it would be difficult to just swap the engine and plug everything in like it was on the old engine?
You have to make sure you are getting the same engine code. Look up how to look up your engine code and then find that said engine on eBay or a local picknpull
@@AutoMotivate I'm sorry, I mean even the same direct replacement, same size, everything. For a non-mechanical person, to save $7500 in labor, I was going to try and do it myself. Dumb idea? The swap I mean. My friend and I replaced a V6 with a V8 when I was a teenager in a parking lot with no tools LOL We had to drill new motor mounts. That's the extent of my experience.
Probably could have ripped the head off passenger side literally have to remove only the exhaust manifold and intake so easy to do to swap a couple lifters and would have been fine turn off AFM of course
All future Tahoe videos are here: TH-cam.com/BuildsUnited Playlist with all the Tahoe Videos and in-depth explanations of the process: th-cam.com/users/playlist?list...
Bro this ain't no 5min it was time consuming letting your lady help you t build the stand for the engine g so I can see this is something that is going to be time consuming to do.
The 4.8L is just as reliable as the 6.0. The 5.3L is what you are talking about. However, if i did upgrade to the 6.0 I would also have to swap out the ECU and ect
@@richzhoo4236 if I knew I could have done that, I would. You might also want to consider the transmission. I’m not sure if it was built for that power. Some research should definitely be done before you spend the money on the 6.0
You forgot, “diy engine install in 5min, mechanic wanted $5k, I diy so I saved $5k….” Never mind the f’n stupidity of the above statement, it’s YT in 2024…facts and truth been gone, it’s above clicks and sticking yourself with selfiesticks!
Too all those who replace engine: RESPECT!!! 🙏
I had to laugh because I replaced the engine in my 2010 Tahoe recently, and I bought the exact same engine hoist and stand as you put together at the beginning of this video. It all seemed so familiar!
I'm about to do mines it's so expensive at a shop they are telling me everything will be 7k
@@moniqueisqueen8330 bad ass! I hope you were successful.
I'm a bit jealous of that climate, everything looks like it just rolled off the line, up here in the salt belt everything is just falling to dust, our rigs rust out before the engine shits... Usually lol
Seriously… I was just thinking the same thing. I would be looking at nothing but rust everywhere.
Well u guys made this super easy for me I kinda figured it wouldn’t be rocket science might take a me a few since it’s just my self can’t wait to get my ls in my obs
Take your time my friend, wish you luck!
Awesome video, I wish you lived around the corner from me!!!!
Oh, he means the video is 5 minutes long
Simply outstanding!👏👏👏👏👏👍👍👍👍👍
I wish I was this good and confident with car repair I'm still on minor stuff
Had to replace the engine in my Volkswagen Jetta. A lot of people think changing an engine is hard, but honestly it’s pretty simple…..just super time consuming.
That's true, just did my jeep Liberty, and by myself. 8 was scared but now months to later. I'm happy with it.
It's my first time changing an engine so can I expect to do it in 15 minutes?
Great Video! I have a 2007 Avalanche 5.3L; I'm thinking it should be the same..
Should be identical! I wish you luck!
It’s the same
Very cool!! I’m assuming that was a used engine replacement? What condition was it in? Did it come with a warranty, just in case? Any improvements over the original engine?
It was a direct replacement. The only "improvement" is that I installed fresh gaskets and parts to it. I think it had a 30 day warranty off of eBay. Could probably buy one from the local salvage yard for cheaper.
Doing the same to my Sierra now. Oil pam recommended ?
@@AutoMotivate what oil pan got slapped on there?
Awesome Video Is there a way to determine which ls years are for which trucks>
they go by the 8th Digit of your Vin to have the Best Match is what i know
When aligning with the transmission do you raise it slightly up or it should slide in ??
If I remember correctly, I just had the motor titled
he saving money 💰
Where did you order the motor
That kat tho 🤤
I have a 08 Escalade that spun a rod bearing. Swapped the motor out from a used parts shop and truck won’t start now. Any idea on where to start looking?
Missed plug perhaps. Did you replace it with an exact replacement from the same year,
So how long did it really take???
Where did you get your new motor from
Video time 2:04 what size bolt are these,Holding Engine to stand?Thanks in advance!
Same size as the transmission housing bolts
How much was the engine and how long was the swap? Im reaching close to 300,000 miles on my 4.8 thinking bout swapping for a lower milage engine.
These 4.8s in these trucks for the years are a bit difficult to find for a direct swap, so I had to buy it off of eBay. I think I paid $1200. The swap took a week to do. If I dedicated all day for several days, it could take 1-2 days, especially with a friend and the right tools.
The turtle 😂
you should do the dod delete in the ecm i got 221000 miles with no problems other them when i turn it up it breaks the rearend or the driveshaft them 10 bolts are just junk but good video man
It’s actually the 4.8L motor, which doesn’t have the AFM. Little bit less power, but it’s still has some get up and go
@@AutoMotivate 4.8 just a different stroke from what I recall, definitely the motor to have for this gen. Does 30 hp really matter in a big SUV that isn't a sports car?
@@slime_editzidk but I’d take all I can get
I bought a replacement 5.3 motor for my Sierra I have a 2011 and it’s a 2013 replacement vin code is 7 original motor is three days they are direct fit. Question is should I use the computer on the new harness or can I keep my old one in ?
did you figure it out
The one that came with the motor. If you use the same ECM the odometer will read the same mileage on the dash.
Sooo I want to swap my 5.3 out for a 6.2 in my Yukon and I’m no mechanic so would it still be just a basic swap as in snatching old motor out and replacing it or would I have to change something else
The 6.2 will probably have a few different wires and need a different computer. Not 100% sure though
I’ve been working on pulling mine and the transmission won’t let go of the engine. Think I pulled out 8 bolts, pretty sure that was all of them
Recheck my friend. I thought mine was out too, but there are some hidden bolts near the firewall.
Is it possible to swap the 5.3 to an LS3. I have a 08 Yukon
Yes but you'll need to get it tuned
I want to pull mine out and refresh it, need another car tho
How manny actual hrs/days ? went into doing the swap ?
The hours were scattered because I slowly worked on it as I waited for the motor. I’d said I put in a total of 2-3 days. First time doing it
What year is interchangeable with these tahoes as far as transmission
06 and 07 is only 06 07 classic and nbs I've been told from dealer but wrecker says 07 is only 07 for nbs other years idk I have 07nbs
How did an oil change destroy the engine?
probably the cheap oil change place didn't put the plug in properly...
Any issues with the front bumper hitting the lift?
I was close to it for sure!
I don't bother locking up my car at night. I just remove the engine before I go to bed.
Whats that blue mat that he put before driving the car on it
its just a blue tarp from walmart
@@AutoMotivate it does stop or something like that from falling on ground?
It's to catch any oil/fluid drips so the driveway doesn't get stained @@noobstrom3279
How do you match the engines, to know what will be a direct replacement when buying a used engine specifically?
If the vehicle the motor comes from a different model, can that have differences in say wiring harnesses for example where it would be difficult to just swap the engine and plug everything in like it was on the old engine?
You have to make sure you are getting the same engine code. Look up how to look up your engine code and then find that said engine on eBay or a local picknpull
@@AutoMotivate thanks!
Go Gators!!! 🐊🐊🐊
🐊 let’s see what next year holds! Merry Christmas
5 mins aka 55 hours 😂
5 is the new 55
I was told that you had to do some sort of reprogramming when switching engines? You can't just put it in and start it up. True?
I am not 100% sure, but that would make since. The ECU is programmed to my 4.8L and its specific parameters. A 6.0 would breath quite a bit different.
@@AutoMotivate I'm sorry, I mean even the same direct replacement, same size, everything.
For a non-mechanical person, to save $7500 in labor, I was going to try and do it myself. Dumb idea? The swap I mean.
My friend and I replaced a V6 with a V8 when I was a teenager in a parking lot with no tools LOL We had to drill new motor mounts. That's the extent of my experience.
@AutoMotivate ah i was gonna say looks like it doesnt have dod which is always a plus its the good ol 4.8 lil brother lol🤣
How'd you get the tranny off? Didn't show any of that!
We didn't see the funniest part: the f top bolt of the 4L60E. Nice video.
You dont have to remove the transmission out of the truck
He just unbolted the bell housing.
Probably could have ripped the head off passenger side literally have to remove only the exhaust manifold and intake so easy to do to swap a couple lifters and would have been fine turn off AFM of course
All future Tahoe videos are here:
TH-cam.com/BuildsUnited
Playlist with all the Tahoe Videos and in-depth explanations of the process:
th-cam.com/users/playlist?list...
You put the same 5.3?
4.8L
I used a tree and a come along once... 😎
It took me about 5 minutes also... 😂🤣😅☺️😘
If you fast forward it fast enough 😂
5 min or 5 days lol
Went to the dealership first, quoted $11,000 lol
Ok... Lemme see
This video is sped up and edited it must have taken at least 10 minutes to swap that engine.😂
At least.
❣️❣️❣️🥀
So you guys are regular dudes or mechanics by trade??
We are regular dudes with a hobby working on our own project cars.
Quite impressive you did this in your drive way. You should use gloves.
I like using vinyl gloves but they kept getting filled with sweat..
Gloves are for girls
: )
Bro this ain't no 5min it was time consuming letting your lady help you t build the stand for the engine g so I can see this is something that is going to be time consuming to do.
Seek Jesus! He’s the way! The truth! And the life! Repent for the Kingdom is at hand!
Dude how you gonna take one engine out n swap it with another junky engine
It’s running flawless, that is why.
cus he paid 1,200 for a good engine. and a new engine would be more than twice that money
U should have put 6.0 lq4/lq9 in there instead this engine with faulty fuel active management system trash
The 4.8L is just as reliable as the 6.0. The 5.3L is what you are talking about.
However, if i did upgrade to the 6.0 I would also have to swap out the ECU and ect
Ecu? I have 07 im wanting to go with 6.0
@@richzhoo4236 that’s the computer module. I could be wrong though.
@@richzhoo4236 if I knew I could have done that, I would. You might also want to consider the transmission. I’m not sure if it was built for that power. Some research should definitely be done before you spend the money on the 6.0
@@AutoMotivate kk
You forgot, “diy engine install in 5min, mechanic wanted $5k, I diy so I saved $5k….” Never mind the f’n stupidity of the above statement, it’s YT in 2024…facts and truth been gone, it’s above clicks and sticking yourself with selfiesticks!
*it’s about