sometimes seems like a lot of material is used for centers that ends up being covered by a sticker, so a bit of a waste. I like the colors used in this one, though I'm usually more of a fan of greens and blues.
*OOOH! THOSE COLORS, *Julie! 💕😍❤ That is just beau-ti-ful! 😊👍 I really like the contrast between the large ring of petals and the tiny ones! Just wish you could figure out how to get the center to close, because I know you're frustrated. However, I like everything you make, so I'm not at all frustrated.❤😊❤
What would happen if you use a darker color as the last color? Maybe that would look cool. What is the glitter in the middle is hindering the middle coming back together too? I love to watch your channel, you have amazing work! ❤❤
I am a bit new with resin but I think that the white blobs are the drops from the scraping maby😅 But I love youre trying over and over again. I from Holland and we say “van proberen kan je leren” translation when you tri you learn. But it won’t rym annymore😂😂😂😂
I watched someone and they poured the outside in and the white they poured in rings instead of a dump pour. They got beautiful petals and the push was really slow
I wonder if scraping the cups after you pour on the white round and the final push are causing problems. Each time you scrape more in, it's probably landing at a slightly different area of the center, causing it to be uneven. Same with scraping in the stones
It's very pretty! BUT -- I think the center-bits you're adding to the resin is what's causing it not to close in enough and also probably causing the blobs that you want to put stickers over. This has been my theory for awhile but this one really emphasizes that to me. Have you tried without adding a piece/pieces to the center? I'd be so curious to see the results! Regardless, your pieces are always beautiful :)
Is it possible when you add the stones it breaks the tension in that area and cause the white to fall like that and it kinda stops the resin from flowing into the middle?
What would happen if you put the glitter center in the mould first before pouring any of the resin? It seems like the glitter is pushing the colored resin away.
I love the colors in this but I agree with most everyone else I think the stones are to heavy and are hindering the center from closing. Maybe you could wait a little longer to put the stones in. Give it a chance to close some before adding the stones
I can tell you're very frustrated with this process. I hate to add to your frustration , but I really think the stones in the middle are hindering your colors going to the middle.
I have been thinking that for some time now too. Maybe you should try leaving your center blank or just swirling the resin a bit? Anyway good luck in your quest. ❤
Something about the convection flow of the resin. It's not the shape of the mold you're using--you've used a few different types, though I don't remember if any were non-live edge, but there's been enough variation in shape to prove that this isn't really a factor to be worried about. Everything else closes up very neatly, even the 'back to basics' 3D Blooms you do. It may just be that this type of recipe isn't meant to close any tighter than the closest one we've seen here. If nothing else has proven consistent, it is the resin doing as it wishes. That's for sure. 😅 Either way, I like the stickers Flower in Flower series you have going.
As hard as you have worked to try and figure this out I don't understand why you don't try it without putting the stones in the center. It's just a suggestion from a different perspective.❤
I think u should not put the stones in the middle, I think their stopping to flow, try doing it with out adding the stone and see what happens, good luck
I love the colors in this but I agree with most everyone else I think the stones are to heavy and are hindering the center from closing. Maybe you could wait a little longer to put the stones in. Give it a chance to close some before adding the stones
Very pretty
Nix the stones in the center!❤
yes. this!
The colors are beautiful, maybe try it without the stones and see how it does ❤️
I want to see the big turtle again. I just love that… lol
I just wonder if it’s the stone things you put in the middle that prevents the resin from pulling all the way into the middle.
I think the blob in the middle is not working for her petty ❤
Pretty. I think the glitter in the middle is preventing from closing. I really like the flowers you put in the middle of your coasters.
What if you don't put something in the middle to repel the resin...
sometimes seems like a lot of material is used for centers that ends up being covered by a sticker, so a bit of a waste. I like the colors used in this one, though I'm usually more of a fan of greens and blues.
*OOOH! THOSE COLORS, *Julie! 💕😍❤ That is just beau-ti-ful! 😊👍 I really like the contrast between the large ring of petals and the tiny ones! Just wish you could figure out how to get the center to close, because I know you're frustrated. However, I like everything you make, so I'm not at all frustrated.❤😊❤
Blue one is beautiful
I agree with @suewarnes, everything you make we love even if you are somewhat disappointed with it..we learn from it all
Lovely as always!!! I have faith in you and anyway, who doesn’t love playing with stickers!?! ❤❤❤
Have you tried leaving out the center crystals
The centre is so elusive, the little petals are very pretty. Everything else works for you, it must be frustrating to you but you will get there. 🎉🌺💐
I think you should use this technique with a larger mold and no stones in the center.
What would happen if you use a darker color as the last color? Maybe that would look cool. What is the glitter in the middle is hindering the middle coming back together too? I love to watch your channel, you have amazing work! ❤❤
I think it's beautiful
I love the cherry 🍒 colour..
Reminds me of Zinnia flowers..
So beautiful ❤😊
We love your experiments too!❤
It’s really pretty! Love it! ❤
Hi Julie,
Love your work. Could you please revisit some of your older moulds such as the tray and 6 coaster geode mould. Thanks
Using those stickers really is brilliant. They take it from meh to yay! As always, pretty colors. Take care, sweetie. xoxoxooxox
It's still pretty Julie. I love that you show us your experiments. We all learn ❤
I am a bit new with resin but I think that the white blobs are the drops from the scraping maby😅
But I love youre trying over and over again.
I from Holland and we say “van proberen kan je leren” translation when you tri you learn. But it won’t rym annymore😂😂😂😂
Great job ❤
It’s still very pretty. ❤
Really pretty Julie ❤
I watched someone and they poured the outside in and the white they poured in rings instead of a dump pour. They got beautiful petals and the push was really slow
Very interesting but beautiful colors.😊❤
Very pretty. I love the colors❤
Still lovely julie
Pretty colors. Would putting the stones in earlier allow the resin to come in more?
It’s very pretty, the colors are amazing ❤❤❤
It looks like a reddish orange sun flower. Would it help if you added a little less white🤔?
I wonder if scraping the cups after you pour on the white round and the final push are causing problems. Each time you scrape more in, it's probably landing at a slightly different area of the center, causing it to be uneven. Same with scraping in the stones
It's gorgeous
Очень красиво.
It's very pretty! BUT -- I think the center-bits you're adding to the resin is what's causing it not to close in enough and also probably causing the blobs that you want to put stickers over. This has been my theory for awhile but this one really emphasizes that to me. Have you tried without adding a piece/pieces to the center? I'd be so curious to see the results! Regardless, your pieces are always beautiful :)
I wouldn’t add the glitter bit in the middle and the sticker does nothing for it in my opinion, but the pinks are a lovely colour
Is it possible when you add the stones it breaks the tension in that area and cause the white to fall like that and it kinda stops the resin from flowing into the middle?
Please pull a couple syrings out befor middle stuff and at the 20 min mark after pour.
What would happen if you put the glitter center in the mould first before pouring any of the resin? It seems like the glitter is pushing the colored resin away.
My thoughts too!
Would sucking out resin interfere too much with this technique?
I love the colors in this but I agree with most everyone else I think the stones are to heavy and are hindering the center from closing. Maybe you could wait a little longer to put the stones in. Give it a chance to close some before adding the stones
I can tell you're very frustrated with this process. I hate to add to your frustration , but I really think the stones in the middle are hindering your colors going to the middle.
I was thinking that too!
I have been thinking that for some time now too.
Maybe you should try leaving your center blank or just swirling the resin a bit?
Anyway good luck in your quest. ❤
Agreed, no stones in center. Less resin in final push or extract some from center after 5 min. KEEP TRYING! I love your process ❤
Agreed, I have watched many of her videos and never has she ever not put anything in the center
I was wondering that as well
😊
Something about the convection flow of the resin. It's not the shape of the mold you're using--you've used a few different types, though I don't remember if any were non-live edge, but there's been enough variation in shape to prove that this isn't really a factor to be worried about. Everything else closes up very neatly, even the 'back to basics' 3D Blooms you do. It may just be that this type of recipe isn't meant to close any tighter than the closest one we've seen here. If nothing else has proven consistent, it is the resin doing as it wishes. That's for sure. 😅
Either way, I like the stickers Flower in Flower series you have going.
Maybe leave the stones out of the center, lovely colors though
I have had so many flash cures with, let's resin. I think I'm too slow!
Maybe less push?
❤❤❤😊
😊❤❤
I think it’s beautiful, but what do I know?
As hard as you have worked to try and figure this out I don't understand why you don't try it without putting the stones in the center. It's just a suggestion from a different perspective.❤
I think u should not put the stones in the middle, I think their stopping to flow, try doing it with out adding the stone and see what happens, good luck
No stones and draw some out of center
watching the video, it seemed to hit your middle stones and stop.
Try using less stones in the center and don't spread them out. Maybe.
I think you are too hard on yourself 😊
Leave those stones OUT
I love the colors in this but I agree with most everyone else I think the stones are to heavy and are hindering the center from closing. Maybe you could wait a little longer to put the stones in. Give it a chance to close some before adding the stones