New KORE DUTY BELT: Micro-Adjustable & Totally Reinforced.
ฝัง
- เผยแพร่เมื่อ 23 พ.ย. 2023
- Introducing the World's First Micro Adjustable DUTY BELT om KORE Essentials. This is the most comfortable, adjustable, supportive duty belt you will ever wear. Not only is it highly adjustable, but its also completely reinforced and it’s made with proprietary materials you won’t find on any other belt. It’s a real game changer for police officers, law enforcement, military personnel, and security professionals.
BETTER FIT
Unlike traditional duty belts that use Velcro or belt holes to adjust with and never seem to fit quite right, Kore Duty belts use an innovative track system that's sewn into the back of the belt with over 20 size positions. This means you can instantly tighten or loosen your belt in small 1/4" increments, just depressing the tab under the buckle, and without ever having to undo the buckle. The result is a perfect fit all day - every day.
BETTER SUPPORT
Both the Outer Duty belt & Inner Liner belt are equipped with Kore’s proprietary, Reinforced Power-Core™ center for added support and durability.
BETTER QUALITY
Kore 2-1/4" duty belts are Manufactured in the USA using our unique manmade 'Amortek' material that's bio-engineered to outperform and outlast traditional duty belts. Belts are available in Smooth Black, Basketweave and Nylon. Velcro hook attaches them to the Kore Inner loop belts. Kore Inner belts are made using super tough, scuba webbing, and are designed like no other.
HEAVY DUTY BUCKLES
Forged in lightweight aluminum [4.6 oz.] and incorporate our patented, spring-loaded ratchet mechanism to engage, adjust and lock your belt in place. The buckle also features a dual release system, keeping it secure against would-be-perpetrators attempting to forcibly remove your belt. It can't be done.
NOTE
Keep in mid that Kore Outer Duty Belts must be used in conjunction with our unique Kore Inner Liner Belts to achieve the micro adjustable feature.
HOW TO SIZE YOUR BELT.
First, you’ll need a pair of sharp, heavy-duty scissors, shears or large serrated knife and the long white Kore Sizing tape. Do not use your own measuring tape. Start by laying the outer 2.25” Duty belt on a table hook side up. Next, overlay the Kore Measuring Tape along the length of belt with track graphic on the tape, overtop of the gray colored nylon track on the belt. Then locate your pant size on the measuring tape. So if your favorite pant size is 36” - you are going to cut the duty belt at that 36” mark. Cut it straight. Once it’s cut, grab your buckle, back out or remove the hex screws using the 2.5 mm wrench, insert the cut belt all the way into the receptacle with proper side facing out, and clamp down the teeth. Don’t tighten the screws until after you try the belt on and check the fit. When you do, be careful not to strip or overtighten the hex screws. The screws go in last.
Next, lay the 1.5” Inner Velcro belt on the table alongside with the measuring tape alongside. The belt hex material should be alongside or under the track graphic, because you’re going to cut from the end opposite the hex material. Next, find your pant size - subtract one inch - and cut. For example if your pants are a 36” size - cut inner belt at 35” mark.
Next, try it on. Feed your inner Velcro belt thru your belt loops and attach the end with the pull-tab over the Velcro. The 4” hex material section should be centered on your pants over the front zipper. The hex area should not have any part of the Velcro inner belt extending behind it. This is so the hex section can collapse when needed without interference. If it does, trim that small section off the inner belt. So for example, if you see an inch of Velcro material behind the 4” hex area - trim off another inch of inner belt. Then you can attach and squeeze the metal end cap to the inner belt and clamp down the teeth.
Next, take your outer belt and position your buckle on the right edge of the hex material so it is hanging over that section. Feed the Duty belt Right to Left aligning it and sticking it to your inner belt Velcro as you go. When the battle belt tip comes around from the left, feed it thru the buckle and pull until snug. You should have 4-5 inches of in and out adjustment. If the belt is too long, remove it and cut off 1” at a time until it works properly. The small release and adjustment tab is under the buckle and you just pinch it to activate it.
Once it’s sized properly you can tighten down the hex screws gently. Lastly, you can attach the belt keeper using its own Velcro next to the buckle. It holds the tip down. Note that this belt tip feeds to the right side (opposite most belts) so you can place your spare mag and gear next to the left side of the buckle, while your holstered gun is off to the right.
Kore Essentials 2-Belt Adjustable Track Systems and dual release buckle is Patented in the USA and currently Patent Pending in 6 countries. - แนวปฏิบัติและการใช้ชีวิต
I've really enjoyed my Kore belt. I've told coworkers I think it's one of the best buys of Law Enforcement gear I've made in 17 years. Love it's adjustability while also being rigid enough to support a duty handgun and other gear. Their customer service is top notch as well.
I just got this duty belt last week and have worn it for three days. I love it. I love the adjustability and it looks really good.
Bought before this video even came out. I’ve got faith in Kore building a strong and quality product. Been waiting for this belt for a while.
Been waiting for something like this!! Can’t wait to rock it
This looks amazing! I have seen a ton of reviews on this companies ccw belts but this is another level. I am thinking I need to try this.
Need a 2 inch version. Most modern duty belts and accessories are 2” now.
bought their battle belt that supposedly works the same and its the best operator belt I ever used. Not sure if you can go back to cobra belts once you try these belts.
I run kore essentials carbon fiber gun belt and totally love it for iwb every day. I love how I can make tiny adjustments in or out to get it right.
Please we need 2in and the nylon belt :)
Does this come in a nylon I looked on the website and couldn't find one?
When will the nylon duty belt be available for purchase???
Check back in Jan 2024. Thanks.
I asked that same question lol should have checked the comments first
@@Koreessentialsbrand Updated ETA?
@koreessentialsbrand any update on exactly when the buckle will be released?
I'm super excited to buy this once the buckle is in compliance with agency policy.
I wore a safariland belt few years ago doing casino security and they were not comfortable or adjustable. I could have used this belt for sure.
When will the nylon belt be available? And hope it will be in 2in.
Nylon is out now!
Available Now, here - www.koreessentials.com/collections/duty-belts-2-25
@@Koreessentialsbrandthank you. Can’t wait to order mine and test it out.
More we are looking for the 1.5 size please??
Make it in molle
Need a silver buckle per our policy it has to be able to be shined is this a possibility?
When will these be back in stock on your website?
2” would’ve made more sense. All departments in my area are 2.
We have 2" belts out now. Thanks
Any plans to make a belt to match the traditional brass or silver Sam Brown buckle?
Yes in Q2 2024. Thanks.
I wil be definitely Get one once they are out!
When is a plain pattern going to be available (not nylon or basketweave? Thank you.
Its available now. Thanks
No way! Very innovative. I think Bianchi belts is going to be scratching their heads over this. They're belts aint comfortable or wall made and same as always.