There's nothing much more satisfying than throwing together a bunch of rusty or semi-rusty parts to make something as clever, but as simple as this pedal-powered propeller drive. I've had this idea in my head for years, but needed to see someone make it so I could see what I needed to do. I've seen lots of uses for the gears in grinders, but ''THIS'' is what I needed to see. I've got a pile of grinders that were on my basement floor during a flood & are now rusted stuck. If I'm not able to take them apart, clean out all the corrosion & rust, then grease them real good to try to make them run again, I'll have a bunch of gears I can use to make some right-angle drives for ''whatever''. THANK YOU ''MR. P1'' FOR MAKING THIS VIDEO SO I COULD ''SEE IT IN ACTION''. As I said, I've had this idea in my head, but ''YOU DID WHAT I NEEDED TO GO FORWARD WITH THAT IDEA''!!! I do have a suggestion, although it's probably not needed. That is to ''maybe'' put a spacer/bushing on the crankshaft between the inside of the housing & that larger round gear. It ''might help'' to spread the housing & ''maybe'' help stabilize that gear & the entire assembly, ''MAYBE''. It seems to work fine as is, but with that spacer & a lot of grease, you've got a great, but simple right angle drive there. GREAT VIDEO, ''MR. P1''. THANK YOU.
Good idea. But it would have been better if you user that at the end. Use the full benefit of the different speeds of a bike then transfer that rate to the gearbox. That way you will have a lot more control over the velocity of the propeller.
🇮🇳🇮🇳🇮🇳hi brother you can make mixer grinder without electric power by using gear from bicycle try it once you will get a great success think about it best of luck (jai hind) 🇮🇳🇮🇳.
There's nothing much more satisfying than throwing together a bunch of rusty or semi-rusty parts to make something as clever, but as simple as this pedal-powered propeller drive. I've had this idea in my head for years, but needed to see someone make it so I could see what I needed to do. I've seen lots of uses for the gears in grinders, but ''THIS'' is what I needed to see. I've got a pile of grinders that were on my basement floor during a flood & are now rusted stuck. If I'm not able to take them apart, clean out all the corrosion & rust, then grease them real good to try to make them run again, I'll have a bunch of gears I can use to make some right-angle drives for ''whatever''. THANK YOU ''MR. P1'' FOR MAKING THIS VIDEO SO I COULD ''SEE IT IN ACTION''. As I said, I've had this idea in my head, but ''YOU DID WHAT I NEEDED TO GO FORWARD WITH THAT IDEA''!!! I do have a suggestion, although it's probably not needed. That is to ''maybe'' put a spacer/bushing on the crankshaft between the inside of the housing & that larger round gear. It ''might help'' to spread the housing & ''maybe'' help stabilize that gear & the entire assembly, ''MAYBE''. It seems to work fine as is, but with that spacer & a lot of grease, you've got a great, but simple right angle drive there. GREAT VIDEO, ''MR. P1''. THANK YOU.
Good, see you again👍
Thank you
gostei da engenhóca,parabéns,poucos recursos mas bem definido.
Cykling boat mekanizam thouts good👍
Very lovely experience! Keep it on.
Thank you so much
Good idea. But it would have been better if you user that at the end. Use the full benefit of the different speeds of a bike then transfer that rate to the gearbox. That way you will have a lot more control over the velocity of the propeller.
Làm kiểu này hay đây đi ko song ko cần máy
ខ្ញុំចង់បានប្រអប់លេខបែបនេះមួយ បងធ្វើលក់ទេ? តម្លៃប៉ុន្មានដែរ??
ខ្ញុំបានធ្វើវារួចហើយ តែនៅមិនទាន់បានល្អ ចាំពេលក្រោយខ្ញុំធ្វើវាបានល្អ និងដាក់លក់តាម online ហើយ អរគុណដែលចាប់អារម្មណ៍
Awesome pedal gearbox! Put some grease on those gear teeth so you dont have any friction developing to worry about.
Good
Thank you
From where did u got bewal gear
បាត់យូហើយ admin អ្នកគាំទ្រ Chanel គាត់.like 1 🇰🇭🇰🇭🇰🇭👍👍👍😊😊
Greatidea
smart idea! cool
🇮🇳🇮🇳🇮🇳hi brother you can make mixer grinder without electric power by using gear from bicycle try it once you will get a great success think about it best of luck (jai hind) 🇮🇳🇮🇳.
admin លែងថតពីគម្រោងអាគារចឹង?
បងម៉េចហើយអាគារភ្លោះថៃប៊ុនរ៉ុង
Обороты 1 к 2 ..
Josssss 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
cuando vallan a soldar avisen , no me dio tiempo a ponerme la careta !!! 💥
Hey, I think this is amazing, would be able to build a similar one to me, I can pay!
Looks like a 5th wheel jack
Amazing
Thanks
Do you sell these?
Excellent video!!! Great song (at least the first 2 minutes :p )!!!
Next vidio pls
Can u make ne one please i pay u
Ótimo, muito bom.
De masiado largo el vídeo
👍👍👍
new... lol!
🙏❤️
Như vậy mà cũng làm
រង់ចាំយូរហើយ ដល់ម៉ានហើយ admin
Boat kherid na sasti kanha se milenge
🤪🤪🤪😘💐👍👍💐😘
មិចទេឥឡូវអត់ឃើញផុសធ្វើអាគារទៀតចឹងបង??
This is a not special
Only time pass
Fitting an old angle grinder gear train in a tin housing is not a new invention....🤦♂️
Oh yeah? Let’s see your... geary... box... thing.
...you are right...not a new invention...but is an original idea...and a cheap one....it fits perfectly for a project with very tight budget...
Pl 8
បងឈប់ថតពីអាគារភ្លោះថៃប៊ុនរ៉ុងហើយនៅ
Бля ну шо за лайно 10 минут коту під сраку
You gotta be shitting me, "New invention".
Palpak yan
ខ្ញុំលេខទូសព្វ១ឬក២ខ្សែមកស្រួទាក់ទង