Unfortunately for this video, the part that was replaced was the LCD back-light driver, which was clearly not the issue as you could see the back-light was on before he turned it off and tore it apart. Most likely why there was no follow up showing the monitor working after his attempted repair. The reason behind not detecting the display with these boards is the caps. Simple and cheap repair.
I have a 20" Samsung Syncmaster 2032BW monitor. Today when I turned it on, although it showed an image, it constantly showed the MagicBright items being selected one by one without stopping (affecting the brightness of the image as you might expect), other times it did the same thing but with the items in the main OSD menu itself, and other times it also did the same thing when the monitor was detecting the mode, whether digital or analog, sometimes choosing one and then choosing the other! In other words, it seems to me that it goes into a loop (sometimes for quite a few minutes) within the option that is active, be it the OSD Main Menu, the MagicBright menu or even when detecting the mode (whether analog or digital - in this case the menu is digital - DVI). Another thing that sometimes happens (but doesn't affect the image) is the blue color of the power button, some days it's on, other days it flashes, and some days it doesn't even light up, even though I can turn the monitor on! Can anyone give me any clues as to what could be causing this problem with the monitor? Many Thanks.
Parting the case using a stanley knife isn't how I do things. Use an old credit card under the edges of the case halves making sure you don't lift the display and power supply while separating them or you'll rip the thin wires to the front led and side buttons.
Hi, I have a problem with my SyncMaster LD220! If you plug in with a laptop it works fine but if it connects with desktop, displays nothing..help me sir
Sir my Samsung 2233SN is 2009 manufractured yesterday the monitor started like making harsh sounds and the screen was on off 2 sec to 3 and then the flickering... Every section of the monitor is supported equally with the colors... I need help.
wwehs.com Sir I have a problem with my syncmaster B2230 ours are pretty much the same, but when I power on my pc, the monitor makes weird sounds, and it smells like burnt, like its about to explode, any suggestions?
Hello! I'm having a problem with my monitor 2433BW, when the video is not connected (vga or dvi) the image and the blue led are always on, but as soon as I connect the video cable the image and the led are turned off every 5 or 10 sec.. also the push buttons at the sides doesn't work fine... I'm thinking that the problem could be the power supply but I would like to know your opinion. Thanks in advance.
Hello man, i have a syncmaster B2330, when i plug the power cord blue led dont work and when i press the power buttom never start. does nothing. Can u help me? thanks
Dear sir..I have problem with this exact monitor. When power ON the display will have backlight for a few seconds..then the display will repeatly ON and OFF. Could it be the capcitor problem?
same problem here with me, a vertical thin blue line at first . But now all gone Black - nothing display. what is the problem and has you fix it? Thanks
I don't know if you will reply to this comment because this video was released 3 years ago, well I have a monitor which is displaying some green lines on it, i changed my contrast and brightness. It removed the lines but the display is still too bright.Also my monitor settings are locked idk why.
can someone please, just tell me what the name of the clear, polycarbonate, piece on the bottom of the bezel is called and what the model number is??? Please,
I have same monitor and I wanted to use it with Mi Box. I bought a HDMI to VGA cable and I could get the visuals. But this monitor doesn't seem to have speakers nor it has 3 mm Aux output. Can someone help me to understand how I can get Audio output without using CPU ?
Hi Mohamad arahman for no video detect Problem ,if you sure have backlight , you should open the mainboard and check the fuse on sync line at RGB connector .
Hello, when i start my samsung syncmaster monitor, on the upper left side a box switches between analog and digital for 5-6 times and then goes black. Is this a problem with the cable or the monitor itself ? Any idea what is causing this ?? Thank You
please help me i have a problem my samsung LA22C350D1 cant detect HDMI but instead DVI detected. I am using HDMI to my video card/graphics card HDMI and my resolution is only 1024x768 and 800x600. In my Nvidia settings Digital Display was reading instead of HDMI to HDTV. What can I do? Sorry for my bad english! Thank you in advance and God bless!
+Jay Evangelista hello, your monitor got problem with IC controller . You have two options. First change the IC controller and second is change the mainboard it's around 30$. Otherwise you can buy HDMI converter to DVI . Good luck.
Thank you sir for helping me! btw if i buy HDMI converter to DVI my resolution possible to come back to 1080p? coz my videocard has DVI port. Thank you again and God bless you!
wow thanks sir for the answer! but 1 last question sir, my monitor has no DVI input only HDMI/DVI (hdmi and dvi has combine in 1) VGA but my videocard has DVI input. I can still use 1080p resolution? Thank you so much for your kindness and helpful advice! =)
i having the same monitor, but when power on, it only show white screen, but the white screen going to deem till half of it is black... is this same issue with this capacitors?
hi, my lg23e53v is having this weird issue,the control buttons,autamatically pops up,and keeps changing colour,shuts the monitor and again it is turned on automatically..... its just displays random, options automatically , ! what might be the issue,is it the control buttons!
Hello sir........ I've got a problem in my Samsung monitor. Everything is working fine but the magicbright option pops up and then keeps changing automatically forever. Any suggestions ? :(
Yes I cleaned the switches and hit it a few time in rage. Now its completely fine :D Print Genius , cleaning switches worked for me. :D Hope it will work for u too and you will get rid of this problem.
Good Day Sir, I need your advice. I have exactly same monitor connected to a Computer with AMD Processor and Gigabyte motherboard. The monitor keeps blinking and switching between Analog and Digital and whenever the screen shows up, it is the same time when Auto Adjustment keeps kicking in on it's own repeatedly. Sometimes it does not occur for contiued periods. But once it starts occuring there is no way to get rid of it. I have tried using the monitor with different computer, different power supply, different cables, every trick that I could to make sure the problem is with the monitor and not anything else, yet the problem persists.Samsung Live Chat gives no clear answer on what is wrong. Please help.
Thanks for your opinion. I did find out the real problem though. It was nothing big simply the hard keys on the right corner ...that needed to be changed
Sir, Really nice and helpful videos. Kindly help me to resolve my problem. I have Smsung-SyncMaster-2033-SW-PLUS (Model Code: LS20CMZKFNALXL) I am having a flickering problem since last two months. Flickering is more at low Brightness values. (Nature of Flickering: No distrotion of screen picture. Just flickering backlight. Like an old Tube Light) At zero Brightness value, screen flickering is more. Is it due to faulty back light? Please suggest the solution.
I got the very same monitor but for the life of me, I can's open it. I broke my nails trying to......ok I got it open. Trying to find if anything burned out; checked the fuses. a ok. Not much else I can do. Pains me to throw it out.
Hello, I've got a problem with my monitor, it's working fine, except every time it sleeps, the monitor will not turn on. the blue LED is flashing, but when it's completely on it does not flash. any suggestions? ps. I restarted it many times and it didn't help.
Hi.. thanks wwe hunt 4 uploading such helpfull video... My 2233sw is displying just for 2-3 seconds then no display when again swith off & on then also 2-3 seconds ..... i check capacitors all are working..... there is a chip "U202" at back side of board(opposite where all capacitor are there) it's like mosfet with 4 pins but only 3 pins are connected one is not connected but i'm sure wether it should b connected or not and tell me if it connect it to solve my problem.
when rain fall in night/cooler. morning when i start computer samsung b2230 monitor not start i touch power button on panel each time display on and after few seconds display gone then i again touch power display again start and i try again again then finally display stable
Hello Sir, I have the same monitor but with a white screen problem, I tried to follow the video and unplugged and re assembly everything but it didn't work :( can it be saved or should I get a new monitor? Here are some pictures of it imgur.com/a/TPgqv
+AlbertBarto , Hello , thanks your comment. I saw your pictures, the white screen has two cause: 1- LCD screen 2- mainboard.you need to change or try with another LCD screen. I guess the LCD screen needs to replacement.
Unfortunately for this video, the part that was replaced was the LCD back-light driver, which was clearly not the issue as you could see the back-light was on before he turned it off and tore it apart. Most likely why there was no follow up showing the monitor working after his attempted repair. The reason behind not detecting the display with these boards is the caps. Simple and cheap repair.
yup i noticed that too 😂
Is that screwdriver long enough?
izzzzzz6 jajajajajaaa its seems.
my also very long
screw driver
Yes
It is for old fat TVs, it seems he is an expert with a long experience working on tv repairs.
I have a 20" Samsung Syncmaster 2032BW monitor.
Today when I turned it on, although it showed an image, it constantly showed the MagicBright items being selected one by one without stopping (affecting the brightness of the image as you might expect), other times it did the same thing but with the items in the main OSD menu itself, and other times it also did the same thing when the monitor was detecting the mode, whether digital or analog, sometimes choosing one and then choosing the other!
In other words, it seems to me that it goes into a loop (sometimes for quite a few minutes) within the option that is active, be it the OSD Main Menu, the MagicBright menu or even when detecting the mode (whether analog or digital - in this case the menu is digital - DVI).
Another thing that sometimes happens (but doesn't affect the image) is the blue color of the power button, some days it's on, other days it flashes, and some days it doesn't even light up, even though I can turn the monitor on!
Can anyone give me any clues as to what could be causing this problem with the monitor?
Many Thanks.
@pedrofigueiredo4905 I have the same problem, pelase let me know if you have found a fix.
I'm leaving a like - used the video to remove the annoying bottom led + transparent strip on a 2nd hand 2033sw. Thanks.
what if the screeen turns off and on again every 5 seconds?
Parting the case using a stanley knife isn't how I do things. Use an old credit card under the edges of the case halves making sure you don't lift the display and power supply while separating them or you'll rip the thin wires to the front led and side buttons.
Hi, i need a same type new inverter transformer for an 2033 samsung. Can you send me a link where i can buy a new like this? Thanks.
just search in google you should find in Alibaba.com
wwehs.com Thanks.
Hi, I have a problem with my SyncMaster LD220! If you plug in with a laptop it works fine but if it connects with desktop, displays nothing..help me sir
Sir my Samsung 2233SN is 2009 manufractured yesterday the monitor started like making harsh sounds and the screen was on off 2 sec to 3 and then the flickering... Every section of the monitor is supported equally with the colors... I need help.
Did i hear you say You will need a screwdriver with some serious length to get these tiny screws out
Do you have a list of the tools you used in this video?
wwehs.com Sir I have a problem with my syncmaster B2230 ours are pretty much the same, but when I power on my pc, the monitor makes weird sounds, and it smells like burnt, like its about to explode, any suggestions?
What is the part that you're replacing and where can I buy it? Thanks!
Did you ever find the part number or where you can buy one?
@@caladoregandt7191 no I ended up getting rid of it.
Many thanks for the video explanation.
I just fixed my Samsung 2033HD for 10€
Pro tip : watch movies at flixzone. Been using it for watching loads of movies these days.
@Karsyn Alexzander yup, have been using Flixzone} for since december myself =)
@Karsyn Alexzander Yup, I've been watching on flixzone} for since november myself :)
Hello! I'm having a problem with my monitor 2433BW, when the video is not connected (vga or dvi) the image and the blue led are always on, but as soon as I connect the video cable the image and the led are turned off every 5 or 10 sec.. also the push buttons at the sides doesn't work fine... I'm thinking that the problem could be the power supply but I would like to know your opinion. Thanks in advance.
+Daniel Lara Hi, it's secondary power supply problem, you need replace the capacitors on 12V .
I have a vertical green line near the right side on a monitor exactly like that, what could I do???
Hello man, i have a syncmaster B2330, when i plug the power cord blue led dont work and when i press the power buttom never start. does nothing. Can u help me? thanks
+Emmanuel Fernandez, Hello. It's two cause, first primary section faulty IC and secondary section rectifier diode faulty.
Ok, thanks i will check this and i will msg you later. greetings!
Emmanuel Fernandez my pleasure
i recently bougth a Samsung 2233sw it's appearly ok but a vertical green line appeared on the left side, what would i do ?
hi i am using Samsung sync master 720 n having horizontal line problem in center of monitor can u suggest what to do.
unfortunately horizontal or vertical line is Screen wiring problem when it beginning to show up in first few days can fix it
ok, sir thanks for your valuable reply.
Dear sir..I have problem with this exact monitor. When power ON the display will have backlight for a few seconds..then the display will repeatly ON and OFF. Could it be the capcitor problem?
sure it could be capacitors problem
+wwehs.com
yep..solved the problem..done this by replacing one capacitor. thanks
i am happy for you
I bought a sound bar but have not sound when I try to connect it to the digital optical output.
Hello there, i m having vertical line problem, could u please tell me what's the issue and how to fix it
Model- 2033sw
same problem here with me, a vertical thin blue line at first . But now all gone Black - nothing display. what is the problem and has you fix it? Thanks
I don't know if you will reply to this comment because this video was released 3 years ago, well I have a monitor which is displaying some green lines on it, i changed my contrast and brightness. It removed the lines but the display is still too bright.Also my monitor settings are locked idk why.
+ARshack Yo Hi, Line in the screen doesn't have solution. Just you can change the LCD screen.
Oh ok man but I said that I changed some graphical brightness/contrast settings on my monitor but it is too bright; How to get rid of that? 😬
hello sir in one of my Samsung lcd monitor glowing power led but display not working, pls suggest me something about that
+WWE Hunts Hello
follow the video and repair your monitor. Good Luck
can someone please, just tell me what the name of the clear, polycarbonate, piece on the bottom of the bezel is called and what the model number is??? Please,
good day sir just asking the problem of my samsung monitor b1930 the upper half is ok and the rest of half of screen is black.. thanks in advance
+ialehm amaredlav Hello, unfortunately it's LCD screen problem, needs to change it.
Thanks sir,could u mind telling me how to fix samsung sa10 1/2 top area is nomal,1/2 bottom area is lighter,thanks
My screen keeps blinking black every 10 seconds for just 0.1 second or something, do you know what the problem might be? Thanks !
Mine blinks every 5.5 seconds. Find any fix for yours?
It was really helpful.. thank alot..
That Bollywood song in the background lit...
i've got the same screen on the vidio, but how to fix the black thing bars on the top?
hi i found out this old monitor in my house, and im just asking that is the screen really that dim?
yaar background me hindi gaane bajj rhe hai...mazaa aa gyaa
I have same monitor and I wanted to use it with Mi Box. I bought a HDMI to VGA cable and I could get the visuals. But this monitor doesn't seem to have speakers nor it has 3 mm Aux output.
Can someone help me to understand how I can get Audio output without using CPU ?
Dear sir sem my sumsung lcd but no power problem plz help me power problem my lcd
congratulation and thank you. I have a problem with same model no video detected.What should i do sir.
Hi Mohamad arahman
for no video detect Problem ,if you sure have backlight , you should open the mainboard and check the fuse on sync line at RGB connector .
my view sonic monitor screen line ,how to repair
Hello, when i start my samsung syncmaster monitor, on the upper left side a box switches between analog and digital for 5-6 times and then goes black. Is this a problem with the cable or the monitor itself ? Any idea what is causing this ?? Thank You
Hello, it's normal if after 5 times you get display when PC be on. otherwise the mainboard is faulty.
+wwehs.com how much it will be cost if main board is faulty?
please check it online, i don't have the cost of it
please help me i have a problem my samsung LA22C350D1 cant detect HDMI but instead DVI detected. I am using HDMI to my video card/graphics card HDMI and my resolution is only 1024x768 and 800x600. In my Nvidia settings Digital Display was reading instead of HDMI to HDTV. What can I do? Sorry for my bad english! Thank you in advance and God bless!
+Jay Evangelista hello, your monitor got problem with IC controller . You have two options. First change the IC controller and second is change the mainboard it's around 30$. Otherwise you can buy HDMI converter to DVI .
Good luck.
Thank you sir for helping me! btw if i buy HDMI converter to DVI my resolution possible to come back to 1080p? coz my videocard has DVI port. Thank you again and God bless you!
Jay Evangelista you can use 1080p resolution
wow thanks sir for the answer! but 1 last question sir, my monitor has no DVI input only HDMI/DVI (hdmi and dvi has combine in 1) VGA but my videocard has DVI input. I can still use 1080p resolution? Thank you so much for your kindness and helpful advice! =)
please send picture
i having the same monitor, but when power on, it only show white screen, but the white screen going to deem till half of it is black... is this same issue with this capacitors?
Hi
Not at all, it's screen problem.
I got yellow screen issue(my computer is good(definitely display problem)). Is it because of bad capacitors? help me sir.
+Lionel Jeyaraj Absolutely not , this is possible from VGA cable or mainboard.
Then my monitor is OK right?
wwehs.com thanks for the info. realy helpful.
+Lionel Jeyaraj yes, Boards is ok.
yes sir.
Sir I have the same monitor. No display no power. I opened it. No out put in smps. Like 3v 18v 5v. But capacitor is charging 400v. What to do sir....
sir in my monitor a colourless line is appearing so how do i fix that?
+The 1001 1001 Hi , it doesn't have solution, needs to replace LCD screen if bothering you.
whats is the part no. of the inverter transformer of SyncMaster-2033
Did you ever find the part number?
wow that background song is hindi
Hi sir
I have acer led monitor
Its start time white screen. Not disply any
I take display conetor dust remove and reset but not wrk jet
Sir i have grey screen frequently and the menu appears repeatedly....please help what to do...
Hi, I have i single horizontal line on top of my screen. Is there any way i can fix that?
hell no you need either a new panel or a new monitor
hi,
my lg23e53v is having this weird issue,the control buttons,autamatically pops up,and keeps changing colour,shuts the monitor and again it is turned on automatically.....
its just displays random, options automatically , !
what might be the issue,is it the control buttons!
the control buttons may be dusty you need to clean them by spray 60
Hello sir........ I've got a problem in my Samsung monitor. Everything is working fine but the magicbright option pops up and then keeps changing automatically forever. Any suggestions ? :(
hello , yes my suggestion is open the cover and clean switches .
i have the same problem with my monitor, brightness display always pops. i already cleaned the switches but still it pops
Yes I cleaned the switches and hit it a few time in rage. Now its completely fine :D Print Genius , cleaning switches worked for me. :D Hope it will work for u too and you will get rid of this problem.
Oh and thank you for the suggestion wwehs.com
very good sir thanks for dhis
hello , please i have same this monitor. when i turn on it still 2 or 3 second and turn off where the screen lamp is on .. and when repeat on same !?
+3ndleeeeb, Hi
It's capacitors problem.
What type of capacitor would it need?
Good Day Sir, I need your advice. I have exactly same monitor connected to a Computer with AMD Processor and Gigabyte motherboard. The monitor keeps blinking and switching between Analog and Digital and whenever the screen shows up, it is the same time when Auto Adjustment keeps kicking in on it's own repeatedly. Sometimes it does not occur for contiued periods. But once it starts occuring there is no way to get rid of it. I have tried using the monitor with different computer, different power supply, different cables, every trick that I could to make sure the problem is with the monitor and not anything else, yet the problem persists.Samsung Live Chat gives no clear answer on what is wrong. Please help.
IC controller is gone , you need to replacement the mainboard , search in google by part number
Thanks for your opinion. I did find out the real problem though. It was nothing big simply the hard keys on the right corner ...that needed to be changed
same problem sir....how much it will be cost?location India.
i don't know the price , just search in google for spare part
Sir, Really nice and helpful videos. Kindly help me to resolve my problem. I have Smsung-SyncMaster-2033-SW-PLUS (Model Code: LS20CMZKFNALXL) I am having a flickering problem since last two months. Flickering is more at low Brightness values. (Nature of Flickering: No distrotion of screen picture. Just flickering backlight. Like an old Tube Light)
At zero Brightness value, screen flickering is more. Is it due to faulty back light? Please suggest the solution.
+Hindustani, Hi
It's Voltage problem, checkout the 12 V capacitors and inverters section.
I got the very same monitor but for the life of me, I can's open it. I broke my nails trying to......ok I got it open. Trying to find if anything burned out; checked the fuses. a ok. Not much else I can do. Pains me to throw it out.
Having LG LCD 19inch's, with broken Display, it Could be repair!?
Sir automatic show auto adjustment LCD Monitor Samsung 2033sw.
Mainboard needs to replacement
Hello, I've got a problem with my monitor, it's working fine, except every time it sleeps, the monitor will not turn on. the blue LED is flashing, but when it's completely on it does not flash. any suggestions? ps. I restarted it many times and it didn't help.
+JJ Goudy it's problem in capacitors
+wwehs.com for me the capacitor it's fine but have the same problem
check capacitors on 12V
This my samsung lcd .. Components was problem issue ..In black and white show ..How to resolve show colour in components .
Tell me
Vai Samsung LCD CB monitor model 2033SWplus display Sada Ho Gaya service Thikana jan te pari kethai na hole phone number den
Hi.. thanks wwe hunt 4 uploading such helpfull video... My 2233sw is displying just for 2-3 seconds then no display when again swith off & on then also 2-3 seconds ..... i check capacitors all are working..... there is a chip "U202" at back side of board(opposite where all capacitor are there) it's like mosfet with 4 pins but only 3 pins are connected one is not connected but i'm sure wether it should b connected or not and tell me if it connect it to solve my problem.
I have exactly the same problem. But it appears he isn't answering
Hey do u have solve the problem.. Got the same issue..
muchas gracias amigo me sirvio de muchos :)
Sir....Which component replaced ..mean name ?
+lalsst ksa Electronic& Communication technician , it's inverter
What is the life span of a monitor ??
brightness of monitor suddendly goto full bright after some time and brightness switch is unactive , pl give the solution
Yes I am facing this problem with flikaring
spot on ... thanks!
thank you for the help super video
nice helpfull video but uncomplite, please full video upload with trial. thanks for this video.
Akhilesh Suryavansi Hi
Thanks for the compliment, It's the full movie I got it.I try my best.
thank you sir.
You're welcome
Sir i have Samsung 2033 moniter i am facing horizontal lines on it
What to do
my samsung Problem is this (its not showing the pages or its something like shoting dow ) !!!!!!!!!
Same my Samsung monitor not showing any pictures
Tecnico .lidanxo com garfo para abrir tv .espichando o plastico. Quase rompendo de tando esgacar.NAO GOSTEI!
when rain fall in night/cooler. morning when i start computer samsung b2230 monitor not start i touch power button on panel each time display on and after few seconds display gone then i again touch power display again start and i try again again then finally display stable
you need to change capacitors on secondary section power board
ihave lcd problem sir lcd on but no display and screen off and led plz help me sir
regards shamshad
check capacitors
Bhai mere pas bhi yahi chez he wo on ni horha
Todos os Monitores da Samsung é Bivolt?
Hello Sir, I have the same monitor but with a white screen problem, I tried to follow the video and unplugged and re assembly everything but it didn't work :( can it be saved or should I get a new monitor?
Here are some pictures of it imgur.com/a/TPgqv
+AlbertBarto , Hello , thanks your comment. I saw your pictures, the white screen has two cause: 1- LCD screen 2- mainboard.you need to change or try with another LCD screen. I guess the LCD screen needs to replacement.
Thank you! I think for the price and the availability of the parts in my city it will be easier to get a new one :(
Good channel ! :D
grazie!!!
and my type is no is (Ls20A300)
Or mene mistri ko dikhaya kha sarkit ok hai
thinkyou sir
coisa sem graça só pra olhar tu consertando um monitor muito sem futuro.
Omg i have the same Samsung pc
nice fume extractor :(
Can y’all take mine pls
if you will help me i will happy
Bigadu
Hi sir
I have acer led monitor
Its start time white screen. Not disply any
I take display conetor dust remove and reset but not wrk jet