I put one I these on a 2020 5.3 Silverado and it worked great for about a mile. After that I started to get a traction control light blinking off and then a service 4wd. Made home turned it off and then wouldn't crank back. Any clue ?? Uninstalled and everything works fine. Been searching but no luck.
I’m no expert but if you go to the range technology website you can type in your vehicle and engine info and figure out which model you would need. They make one for Diesel engines specific.
Wich is the part number for denali sierra 1500 6.2L 2022 new refresh 🙏need ASAP for my speedometer limiter i just got the 2022 with new dashboard and hp tunner doesn’t unlock it they don’t know when they are unlocking the computer 🤦🏻♂️
Question RT .. With Auto Start/Stop Disabled I see the cluster alert shows it's disabled when the truck is started, does that alert Clear Itself aftger a few seconds or do I have to press the right steering "ok" button every time I start to clear that alert? That is the one main reason why I would want this device but if I have to press the "ok" button every single time I get in the truck I would just assume turn off the factory button every time ... trying to get a solution where it just happens without thinking of pressing anything every time I start. Thanks for such a great solution!!!
The device does not interact with the TCM directly, but recalibrating your speedometer for a tire size change will have some affect on shifting as the speed sensor will be telling the vehicle the correct RPM for more accurate shift timing
If you want to remove the pulsar LT do you just unplug it and plug the factory harness back in? And then when you reinstall it do you have to reset all your settings again? Thanks
All of the settings will revert to factory when the Pulsar LT is removed and would need to be set back up when it is reinstalled. With the exception of TPMS, those values will remain where you programmed them even with the device removed.
What happens when you remove the Pulsar LT module? Do all settings revert to factory settings? And when you reinstall, do you just reprogram what the areas you want?
All settings, with exception of your TPMS, will revert to factory when the Pulsar LT is removed. Those features will have to be setup again when reinstalled.
You can see the product itself here! www.rangetechnology.com/products/pulsar_lt/parts/22451 It plugs into the datalink port under the hood by the air intake box.
Question: If I remove pulsar before taking truck to dealer. Do I have to re-program after re-install on truck?
I put one I these on a 2020 5.3 Silverado and it worked great for about a mile. After that I started to get a traction control light blinking off and then a service 4wd. Made home turned it off and then wouldn't crank back. Any clue ?? Uninstalled and everything works fine. Been searching but no luck.
Can you pull it out of my 6.2 21 Denali and put it into a 22 Denali with the 3.0 diesel if I buy a new truck ✌️🇨🇦
I’m no expert but if you go to the range technology website you can type in your vehicle and engine info and figure out which model you would need. They make one for Diesel engines specific.
Great video! Hope to get my hands on this bad boy soon!
Are you guys going to make this for the 23 6.2 Sierra?
Wich is the part number for denali sierra 1500 6.2L 2022 new refresh 🙏need ASAP for my speedometer limiter i just got the 2022 with new dashboard and hp tunner doesn’t unlock it they don’t know when they are unlocking the computer 🤦🏻♂️
Is this will work on silverado 2019 ld legacy (old body) ? 5.3
Will this leave any footprint in my computer when going back to the dealer?
Question RT .. With Auto Start/Stop Disabled I see the cluster alert shows it's disabled when the truck is started, does that alert Clear Itself aftger a few seconds or do I have to press the right steering "ok" button every time I start to clear that alert?
That is the one main reason why I would want this device but if I have to press the "ok" button every single time I get in the truck I would just assume turn off the factory button every time ... trying to get a solution where it just happens without thinking of pressing anything every time I start.
Thanks for such a great solution!!!
Hi Chris, this alert clears itself after a few seconds. You do not have to manually clear it each time you start your truck.
Any idea if this Application will work on a 6.2 Cadillac Escalade 2019-2021, and what’s the difference between a High Country 6.2 engine?
We have not added SUV coverage to the Pulsar LT line yet, but it is coming.
Thanks for sharing!
Does recalibrating for tire size also recalibrate the transmission shift points?
The device does not interact with the TCM directly, but recalibrating your speedometer for a tire size change will have some affect on shifting as the speed sensor will be telling the vehicle the correct RPM for more accurate shift timing
If you want to remove the pulsar LT do you just unplug it and plug the factory harness back in? And then when you reinstall it do you have to reset all your settings again?
Thanks
All of the settings will revert to factory when the Pulsar LT is removed and would need to be set back up when it is reinstalled. With the exception of TPMS, those values will remain where you programmed them even with the device removed.
I have a 2020 Silverado custom 5.3 you guys think this will work for that ?
You bet! We support the 2020 5.3L, that's one of our most popular platforms
So my truck won’t go over 98mph from factory. Dealership said it can be changed so I’m stuck doing 98. Will the product change that?
Yes. Adjusting the top speed limiter is one of Pulsar LT's many features!
What happens when you remove the Pulsar LT module? Do all settings revert to factory settings? And when you reinstall, do you just reprogram what the areas you want?
All settings, with exception of your TPMS, will revert to factory when the Pulsar LT is removed. Those features will have to be setup again when reinstalled.
When will availability be for the 2021 5.3 Tahoe?
We have not tested this product for the Tahoe/Suburban and do not have plans to at the moment.
Plug and Play, useful features with a clean user interface. I like it. Now will you buy back my Range DFM Disabler? ;-)
If you have had it for less than 30 days, we would be happy to refund your order!
Does this support 2015 Silverados
We currently only support the 2019-2021 model year, but will be expanding coverage to other platforms soon.
cool
What if the gauge is in Km not miles
What does the axle ratio setting actually do?
That is just for owners who have physically changed out their factory ring and pinion sets for a different gear ratio
Show the product
You can see the product itself here! www.rangetechnology.com/products/pulsar_lt/parts/22451 It plugs into the datalink port under the hood by the air intake box.