As a plumber...I always enjoyed and liked doing the pipe work..they use to put in the plant rooms.. absolutely weeks of work in the there...The end result looks great..thanks for sharing...keep on plumbing 👍😉
I've watched a few of your vids now. It makes me wish I'd done a plumbing apprenticeship with a experienced plumber. Clearly watching your videos you knkw what your doing before you do it. Experience I guess is the key
Greetings from Greece! Μαy I ask the brand and the model of your green laser? By the way, brilliant job! Keep up like this. You are a teacher for us all!😉
Great videos ! Learning a lot of these, I’m looking to completely retrade and do my plumber course, I was wondering do you do many gas engineer jobs ? I’m looking at doing plumbing with hot unvented storage system. But seen for couple extra grand the gas part, is it worth it ? Do you do many gas jobs?
Your craftsmanship is incredible. Very neat, methodical and well presented. I noticed the heat gun trick for getting the waste pipe onto the trap spigot, clever. If you don’t mind me asking what are your thoughts on the Wera self adjusting spanner? Can you get a decent amount of pull on them and would you consider getting one for the 22mm fittings? Thanks
Yeah works well for water softener hoses. Not had one split yet 🤣 I love my weras. The xl for 15mm and the xxl for 22mm work great and can swing like hell off them!
Question please. What is that height adjustable thing you have for your laser level 5:24 in? Always good content, plenty tips and tricks to learn. Keep it up 👍
Hello man i'm a plumber too but in the south of France and I wanted to tell you that you do a great job, the plumber's job in England is very similar to that in France. I have a quick question, what tool or brand do you use to put sealing paste on the connections?
Why so much paste on the compression fitting I’m 38 now been at it since I was 16 and not once’s used it Does it make a difference am I missing something
The quality of the work is good, but it’s not done the best way, the copper pipe coming out of wall should have an angle stop, and the faucet supply lines connected to that so that there is only two connections on each side, instead of the 4 connections on each, extra connections just means extra spots that will leak over time, not to mention the extra money it costs that added no extra benefits to the system
Another good video Been watching your videos for a while and you’re great. I’ve learnt quite a bit from you…however (and you can tell me to piss off lol) you should buy yourself a pair of quality knee pads. You don’t wanna be 50 and your knees are in bits
Sometimes you can put the crescent back nut on first then tighten the lot up with monobloc spanner , saves u fannyin about tryna get it on begind the sink , mite be teaching u how to suck egg with the comment lol 🤣
Awesome vid this mate. I had to do the same tap yesterday and you deffo need mr tickle arms haha. Are you filming on a go pro or is your phone somehow strapped to your head? Lol. Great content keep it up.
As a plumber...I always enjoyed and liked doing the pipe work..they use to put in the plant rooms.. absolutely weeks of work in the there...The end result looks great..thanks for sharing...keep on plumbing 👍😉
Thumbs up if u spent all day plumbing , then got home to watch more plumbing 🤣
Haha love it mate
Mmmhhmmmm. You got me
Don’t! I just home from a 12 hour day and I’m unwinding watching plumbing. I need to get a life 😂😂 I’m gonna look for a hobby today!! 😅
I do the samevthing. My wife yells at me for doing it,but I don't mind!
Very very good. The best hand tools are key to making life easier
Having good tools defo makes life easier at work! And that’s what I want to show others!
It’s a pleasure to watch a proper trades man in action 👍
Very neat and tidy. It shows you take pride in what you do.👍
I've watched a few of your vids now. It makes me wish I'd done a plumbing apprenticeship with a experienced plumber. Clearly watching your videos you knkw what your doing before you do it. Experience I guess is the key
Super craftsmanship always, love watching your skills n perfection in every job ❤
Sei un grande idraulico. È stupefacente come imposti il lavoro e come lo porti avanti. Grande professionista
excellent job as usual, i love these longer vids because it really shows your skill level. how long have you been a plumber?
17 years pal! I’m glad you like them, they take an age to edit how like it!
Mint work lad 👊🔥
Thanks big man 🥰
It’s interesting how in Europe they use pipe bending and in USA we use just fittings.
Yeah we bend everything here must be the copper quality
Nice craftsmanship. I have lots of questions though 😂.
Looks great man
Thanks dude
Top job number one
Thanks paolo mate 🫡👊👊
poetry in motion
Thanks mark!
Well done boss
Keep on
Greetings from Greece!
Μαy I ask the brand and the model of your green laser?
By the way, brilliant job!
Keep up like this. You are a teacher for us all!😉
great video. ended up buying the pipe cleaners how long did yours take to be delivered?
Should be few days if that mate! When did you order them
@@mmplumber Sunday night mate
Great work mate, didnt realise you were on youtube. Quick question, where are the pipe cleaners from cheers
Du bon boulot !!!
Great videos ! Learning a lot of these, I’m looking to completely retrade and do my plumber course, I was wondering do you do many gas engineer jobs ? I’m looking at doing plumbing with hot unvented storage system. But seen for couple extra grand the gas part, is it worth it ? Do you do many gas jobs?
Where are you from? Your work is great!
Nice👍
Thanks dude!
Your craftsmanship is incredible. Very neat, methodical and well presented. I noticed the heat gun trick for getting the waste pipe onto the trap spigot, clever. If you don’t mind me asking what are your thoughts on the Wera self adjusting spanner? Can you get a decent amount of pull on them and would you consider getting one for the 22mm fittings? Thanks
Yeah works well for water softener hoses. Not had one split yet 🤣 I love my weras. The xl for 15mm and the xxl for 22mm work great and can swing like hell off them!
Thanks for watching mate means a lot
@@mmplumber Gentleman thanks pal
Quality 👍🏽
Master🎉 хорошая работа
Thanks 👊
You’re showing off now 😂
Hehe I try mate 🤣👍
You've probably been asked before but what kind of jointing compound are you using. Great vids by the way.
I use slictite or jet lube
Thanks mate really appreciate the interaction
👍
Question please. What is that height adjustable thing you have for your laser level 5:24 in?
Always good content, plenty tips and tricks to learn. Keep it up 👍
It’s the huepar fine adjuster, wouldn’t have a laser without it tbh
Really glad you like them mate!
Thanks mate, it's in my basket! @@mmplumber
Could park me truck in that back cut out 😂😂
Hello man i'm a plumber too but in the south of France and I wanted to tell you that you do a great job, the plumber's job in England is very similar to that in France. I have a quick question, what tool or brand do you use to put sealing paste on the connections?
Moi aussi je suis en France et j'apprends la plomberie, je suis en première année de cap ❤
Is the laser you use the Huepar L011G , does it come with the ajustable bracket , or did you buy it seperate.
many thanks
👍
I bought mine separate
Well worth it tho
Nice job. Which model huepar laser do you have? I'm looking for a laser and they look good value.
amzn.to/3V8PJnZ
Cheers dude this is the one I use
@@mmplumber thank you 👍
Tank you
Thank you for watching
Is plumber job is very difficult??
recommend nerrad tapex kit
Wow 😳👌
Thanks Alex pal 👊👍
👍👍👍
Mint👍
Whata that laser level you're using mate?
Why so much paste on the compression fitting I’m 38 now been at it since I was 16 and not once’s used it
Does it make a difference am I missing something
Csak tudnám, hogy hol lehet ilyen szerszámokat, fittingeket, tömítőanyagokat kapni?!!! Mi meg szívunk...
I get 90% of my
Tools from Amazon 😂
@@mmplumber Thank you!
Hi! what you did colour grey cream for 15mm and 22mm ring or what you used? Thank you
can u use that adjustable laser level stand on other laser level brands thanks
Were is the bypass for the water softener?
It’s all in that black valve kit you push the lever in and out for bypas and soft
What’s that spanner you use to tighten the elbow, also how do you find the rigid pipe slice
Wera joker xl? I love it mate been using it since Feb, bought with my own money and glad I did! Saves looking and storing 2
The quality of the work is good, but it’s not done the best way, the copper pipe coming out of wall should have an angle stop, and the faucet supply lines connected to that so that there is only two connections on each side, instead of the 4 connections on each, extra connections just means extra spots that will leak over time, not to mention the extra money it costs that added no extra benefits to the system
Easy money dude
Money in my pocket!
Another good video
Been watching your videos for a while and you’re great. I’ve learnt quite a bit from you…however (and you can tell me to piss off lol) you should buy yourself a pair of quality knee pads.
You don’t wanna be 50 and your knees are in bits
Hehe I got a kneel mat I carry around! I got a prolapse disk in my back and suffer badly with sciatica but I still roll in everyday to do my job!
0:23 STAY
🤣🤣🥰
What is that adjustable wrench like tool at 2:22 called? I've never seen one like that before.
What brand are your open ended spanners?
Whats the name of the Tool To bend de cooper pipe?
Pipe bender 🤣 monument is the brand
Нормально сделал, красиво
👍
Where can we find the wrench
amzn.to/4bQq1dB
What is the name of that ratcheting Crescent Ranch
Wera xl joker
👍🏼
А зачем вы флюсом мажете разборное соединение?
It’s filled with jointing compound
If you used an angle valve, you'd not need the small copper piece.
عمل جيد 👍🏻
Для чего паста в местах соединения труб?
Who’s been caught with too small a hole in the benchtop to accept both hoses (connecting ends) being fed through from above ☝️
The supply hoses? Never had that issue
Sometimes you can put the crescent back nut on first then tighten the lot up with monobloc spanner , saves u fannyin about tryna get it on begind the sink , mite be teaching u how to suck egg with the comment lol 🤣
You can do this if the work top or sink is thin but this was big!
@mmplumber sometimes u gotta have hands made of rubber to get them on
looks good. But it's wasting of money.
Manifique
❤Numero de cuvre 16 ❤
پ
The tools that these so-called plumbers use today are the height of laziness.....
I would classify them as glorified DIYers.....
Awesome vid this mate. I had to do the same tap yesterday and you deffo need mr tickle arms haha. Are you filming on a go pro or is your phone somehow strapped to your head? Lol. Great content keep it up.
Magician never tells his secrets haha yeah defo need the arms for it or I just tugg on the hoses to keep it down 🤣
Ottimo lavoro. Mi puoi dire che pasta bianca usi prima di avvitare i raccordi ? Grazie